Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scalable simulation of surface-code quantum error correction with coherent noise

Valentine Nyirahafashimana, Nurisya Mohd Shah, Joseph Ntahompagaze

Published Mar 5, 2026• 0 citations
Publisher

Abstract

Abstract Quantum error correction (QEC) is essential for scalable quantum computing, but its realistic evaluation is hindered by the difficulty of simulating coherent noise in large codes. We propose a unified framework for the rotated surface code that integrates a qubit-reduction strategy preserving error dynamics, a coherent noise model with spatial and temporal correlations, and an effective error model validated through simulations up to d=7. GPU-accelerated simulations using QULACS show that coherent errors in the d=5 code predominantly interfere destructively, reducing their effective impact by about 13%. Based on these results, we establish conditions for break-even QEC, requiring a gate-time-to-coherence-time ratio below 0.005–0.007. Our findings indicate that current superconducting platforms operate close to this regime, with residual coupling-induced coherent errors as the main limitation, and provide a practical tool for optimizing surface-code QEC.

DOI
10.21203/rs.3.rs-8897316/v1

Related papers

Simulation and performance analysis of quantum error correction with a rotated surface code under a realistic noise model

Mitsuki Katsuda, Kosuke Mitarai, Keisuke Fujii

The demonstration of quantum error correction (QEC) is one of the most important milestones in the realization of fully-fledged quantum computers. Toward this, QEC experiments using the surface codes have recently been actively conducted. However, it has not yet been realized to protect logical quantum information beyond the physical coherence time. In this work, we performed a full simulation of QEC for the rotated surface codes with a code distance 5, which employs 49 qubits and is within reach of the current state-of-the-art quantum computers. In particular, we evaluate the logical error probability in a realistic noise model that incorporates not only stochastic Pauli errors but also coherent errors due to a systematic control error or unintended interactions. While a straightforward simulation of 49 qubits is not tractable within a reasonable computational time, we reduced the number of qubits required to 26 qubits by delaying the syndrome measurement in simulation. This and a fast quantum computer simulator, , implemented on GPU allows us to simulate full QEC with an arbitrary local noise within reasonable simulation time. Based on the numerical results, we also construct and verify an effective model to incorporate the effect of the coherent error into a stochastic noise model. This allows us to understand what the effect coherent error has on the logical error probability on a large scale without full simulation based on the detailed full simulation of a small scale. The present simulation framework and effective model, which can handle arbitrary local noise, will play a vital role in clarifying the physical parameters that future experimental QEC should target. Published by the American Physical Society 2024

arXiv:2204.11404•Physical Review Research•Jan 8, 2024•21 citations

Recent Advances in Quantum Error Correction Codes for Superconducting Quantum Computing

Zi Wang, Guohua Gao, 武光明

Superconducting quantum computing has become one of the leading technological routes toward practical quantum computing due to its relatively long coherence times and compatibility with scalable integration. However, the high error rates of physical qubits create a scaling paradox that limits further system expansion, making quantum error correction (QEC) a core enabler of fault-tolerant quantum computing. This paper briefly introduces superconducting quantum noise models, stabilizer-code principles, and representative research achievements from 2022 to 2023 as necessary theoretical background and benchmarking references, while mainly focusing on the latest research advances in quantum error correction codes in the field of superconducting quantum computing from 2024 to 2026. It elaborates on the foundational principles of superconducting quantum noise models and stabilizer codes, with a focus on analyzing the architectures and mechanisms of surface codes, color codes, high-rate qLDPC codes, and bosonic codes. This work also summarizes recent milestone achievements, including the first exponential suppression of logical errors achieved by surface codes, the significant reduction of hardware redundancy enabled by high-rate codes, and the break-even point crossed by bosonic codes. Through multidimensional comparisons, it is shown that achieving fault tolerance at the million-qubit scale will require deep synergistic optimization of hardware, codes, and decoders. On this basis, pathways and guidance are provided for building low-overhead, high-efficiency universal quantum computers.

International Symposium on Computer Technology and Information Science (ISCTIS)•May 15, 2026•0 citations

Characterizing Quantum Error Correction Performance of Radiation-induced Errors

Paul G. Baity, Anuj K. Nayak, Lav R. Varshney +4 more

Radiation impacts are a current challenge with computing on superconducting-based quantum devices because they can lead to widespread correlated errors across the device. Such errors can be problematic for quantum error correction (QEC) codes, which are generally designed to correct independent errors. To address this, we have developed a computational model to simulate the effects of radiation impacts on QEC performance. This is achieved by building from recently developed models of quasiparticle density, mapping radiation-induced qubit error rates onto a quantum error channel and simulation of a simple surface code. We also provide a performance metric to quantify the resilience of a QEC code to radiation impacts. Additionally, we sweep various parameters of chip design to test mitigation strategies for improved QEC performance. Our model approach is holistic, allowing for modular performance testing of error mitigation strategies and chip and code designs.

quant-pharXiv:2602.06202•Feb 9, 2026•1 citation

Correcting coherent errors with surface codes

Sergey B. Bravyi, Matthias Englbrecht, Robert König +1 more

Abstract Surface codes are building blocks of quantum computing platforms based on 2D arrays of qubits responsible for detecting and correcting errors. The error suppression achieved by the surface code is usually estimated by simulating toy noise models describing random Pauli errors. However, Pauli noise models fail to capture coherent processes such as systematic unitary errors caused by imperfect control pulses. Here we report the first large-scale simulation of quantum error correction protocols based on the surface code in the presence of coherent noise. We observe that the standard Pauli approximation provides an accurate estimate of the error threshold but underestimates the logical error rate in the sub-threshold regime. We find that for large code size the logical-level noise is well approximated by random Pauli errors even though the physical-level noise is coherent. Our work demonstrates that coherent effects do not significantly change the error correcting threshold of surface codes. This gives more confidence in the viability of the fault-tolerance architecture pursued by several experimental groups.

arXiv:1710.02270•npj Quantum Information•Oct 25, 2018•192 citations

Surface Code Error Correction with Crosstalk Noise

Zeyuan Zhou, Andrew Ji, Yongshan Ding

The design and performance analysis of quantum error correction (QEC) codes are often based on incoherent and independent noise models since it is easy to simulate. However, these models fail to capture realistic hardware noise sources, such as correlated errors (crosstalk), which can significantly impact QEC code performance, especially when they occur between data and ancillary qubits. In this paper, we systematically study various types of crosstalk noise and quantify their effects on surface codes through memory and stability experiments. Based on our findings, we introduce crosstalk-robust implementations of QEC via flag qubit designs and redundant stabilizer checks. We perform both numerical and analytical studies to demonstrate the efficacy of these strategies. In addition, we analyze logical crosstalk in an$[[n, k>1, d]]$code block and establish analytical conditions under which physical crosstalk does not lead to logical crosstalk. Together, our analytical and numerical results shed light on designing QEC codes that are robust against hardware realistic crosstalk noise, paving the way for reliable experimental realization of fault-tolerant quantum computing.

arXiv:2503.04642•IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•20 citations

Hierarchical Quantum Error Correction with Hypergraph Product Code and Rotated Surface Code

Junichi Haruna, Keisuke Fujii

Abstract We propose and analyze a hierarchical quantum error correction (QEC) scheme that concatenates hypergraph product (HGP) codes with rotated surface codes and that is compatible with quantum computers with only nearest-neighbor interactions. The outer code employs (3,4)-random HGP codes, known for their constant encoding rate and favorable distance scaling, while the inner code consists of a rotated surface code with distance 5, allowing hardware compatibility through lattice surgery. To address the decoding bottleneck, we utilize a soft-decision decoding strategy that combines belief propagation with ordered statistics decoding, enhanced by a syndrome-conditioned logical error probability computed via a tailored lookup table for the inner code. Numerical simulations under a code capacity noise model demonstrate that our hierarchical codes achieve logical error suppression below the threshold. Furthermore, we derive explicit conditions under which the proposed codes surpass surface codes as a QEC code in both qubit efficiency and error rate. In particular, for the size parameter $s \ge 4$ (which corresponds to 16 logical qubits) and the distance $d\ge 25$, our construction outperforms the rotated surface code in practical regimes with physical error rates around or less than $10^{-2}$. These results suggest that concatenated quantum low-density parity-check surface architectures can offer a scalable and resource-efficient path toward near-term fault-tolerant quantum computation.

arXiv:2505.18592•Progress of Theoretical and Experimental Physics•Sep 23, 2025•0 citations
Abstract Quantum error correction (QEC) is essential for scalable quantum computing, but its realistic evaluation is hindered by the difficulty of simulating coherent noise in large codes. We propose a unified framework for the rotated surface code that integrates a qubit-reduction strategy preserving error dynamics, a coherent noise model with spatial and temporal correlations, and an effective error model validated through simulations up to d=7. GPU-accelerated simulations using QULACS show that coherent errors in the d=5 code predominantly interfere destructively, reducing their effective impact by about 13%. Based on these results, we establish conditions for break-even QEC, requiring a gate-time-to-coherence-time ratio below 0.005–0.007. Our findings indicate that current superconducting platforms operate close to this regime, with residual coupling-induced coherent errors as the main limitation, and provide a practical tool for optimizing surface-code QEC.
The demonstration of quantum error correction (QEC) is one of the most important milestones in the realization of fully-fledged quantum computers. Toward this, QEC experiments using the surface codes have recently been actively conducted. However, it has not yet been realized to protect logical quantum information beyond the physical coherence time. In this work, we performed a full simulation of QEC for the rotated surface codes with a code distance 5, which employs 49 qubits and is within reach of the current state-of-the-art quantum computers. In particular, we evaluate the logical error probability in a realistic noise model that incorporates not only stochastic Pauli errors but also coherent errors due to a systematic control error or unintended interactions. While a straightforward simulation of 49 qubits is not tractable within a reasonable computational time, we reduced the number of qubits required to 26 qubits by delaying the syndrome measurement in simulation. This and a fast quantum computer simulator, , implemented on GPU allows us to simulate full QEC with an arbitrary local noise within reasonable simulation time. Based on the numerical results, we also construct and verify an effective model to incorporate the effect of the coherent error into a stochastic noise model. This allows us to understand what the effect coherent error has on the logical error probability on a large scale without full simulation based on the detailed full simulation of a small scale. The present simulation framework and effective model, which can handle arbitrary local noise, will play a vital role in clarifying the physical parameters that future experimental QEC should target. Published by the American Physical Society 2024
Superconducting quantum computing has become one of the leading technological routes toward practical quantum computing due to its relatively long coherence times and compatibility with scalable integration. However, the high error rates of physical qubits create a scaling paradox that limits further system expansion, making quantum error correction (QEC) a core enabler of fault-tolerant quantum computing. This paper briefly introduces superconducting quantum noise models, stabilizer-code principles, and representative research achievements from 2022 to 2023 as necessary theoretical background and benchmarking references, while mainly focusing on the latest research advances in quantum error correction codes in the field of superconducting quantum computing from 2024 to 2026. It elaborates on the foundational principles of superconducting quantum noise models and stabilizer codes, with a focus on analyzing the architectures and mechanisms of surface codes, color codes, high-rate qLDPC codes, and bosonic codes. This work also summarizes recent milestone achievements, including the first exponential suppression of logical errors achieved by surface codes, the significant reduction of hardware redundancy enabled by high-rate codes, and the break-even point crossed by bosonic codes. Through multidimensional comparisons, it is shown that achieving fault tolerance at the million-qubit scale will require deep synergistic optimization of hardware, codes, and decoders. On this basis, pathways and guidance are provided for building low-overhead, high-efficiency universal quantum computers.
Radiation impacts are a current challenge with computing on superconducting-based quantum devices because they can lead to widespread correlated errors across the device. Such errors can be problematic for quantum error correction (QEC) codes, which are generally designed to correct independent errors. To address this, we have developed a computational model to simulate the effects of radiation impacts on QEC performance. This is achieved by building from recently developed models of quasiparticle density, mapping radiation-induced qubit error rates onto a quantum error channel and simulation of a simple surface code. We also provide a performance metric to quantify the resilience of a QEC code to radiation impacts. Additionally, we sweep various parameters of chip design to test mitigation strategies for improved QEC performance. Our model approach is holistic, allowing for modular performance testing of error mitigation strategies and chip and code designs.
Abstract Surface codes are building blocks of quantum computing platforms based on 2D arrays of qubits responsible for detecting and correcting errors. The error suppression achieved by the surface code is usually estimated by simulating toy noise models describing random Pauli errors. However, Pauli noise models fail to capture coherent processes such as systematic unitary errors caused by imperfect control pulses. Here we report the first large-scale simulation of quantum error correction protocols based on the surface code in the presence of coherent noise. We observe that the standard Pauli approximation provides an accurate estimate of the error threshold but underestimates the logical error rate in the sub-threshold regime. We find that for large code size the logical-level noise is well approximated by random Pauli errors even though the physical-level noise is coherent. Our work demonstrates that coherent effects do not significantly change the error correcting threshold of surface codes. This gives more confidence in the viability of the fault-tolerance architecture pursued by several experimental groups.
The design and performance analysis of quantum error correction (QEC) codes are often based on incoherent and independent noise models since it is easy to simulate. However, these models fail to capture realistic hardware noise sources, such as correlated errors (crosstalk), which can significantly impact QEC code performance, especially when they occur between data and ancillary qubits. In this paper, we systematically study various types of crosstalk noise and quantify their effects on surface codes through memory and stability experiments. Based on our findings, we introduce crosstalk-robust implementations of QEC via flag qubit designs and redundant stabilizer checks. We perform both numerical and analytical studies to demonstrate the efficacy of these strategies. In addition, we analyze logical crosstalk in an[[n,k>1,d]][[n, k>1, d]][[n,k>1,d]]code block and establish analytical conditions under which physical crosstalk does not lead to logical crosstalk. Together, our analytical and numerical results shed light on designing QEC codes that are robust against hardware realistic crosstalk noise, paving the way for reliable experimental realization of fault-tolerant quantum computing.
Abstract We propose and analyze a hierarchical quantum error correction (QEC) scheme that concatenates hypergraph product (HGP) codes with rotated surface codes and that is compatible with quantum computers with only nearest-neighbor interactions. The outer code employs (3,4)-random HGP codes, known for their constant encoding rate and favorable distance scaling, while the inner code consists of a rotated surface code with distance 5, allowing hardware compatibility through lattice surgery. To address the decoding bottleneck, we utilize a soft-decision decoding strategy that combines belief propagation with ordered statistics decoding, enhanced by a syndrome-conditioned logical error probability computed via a tailored lookup table for the inner code. Numerical simulations under a code capacity noise model demonstrate that our hierarchical codes achieve logical error suppression below the threshold. Furthermore, we derive explicit conditions under which the proposed codes surpass surface codes as a QEC code in both qubit efficiency and error rate. In particular, for the size parameter s≥4s \ge 4s≥4 (which corresponds to 16 logical qubits) and the distance d≥25d\ge 25d≥25, our construction outperforms the rotated surface code in practical regimes with physical error rates around or less than 10−210^{-2}10−2. These results suggest that concatenated quantum low-density parity-check surface architectures can offer a scalable and resource-efficient path toward near-term fault-tolerant quantum computation.