Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Emerging Electronics (ICEE)

Wafer-scale graphene Josephson field-effect transistors and device models for superconducting integrated circuits

Shanuka Gamaethige, Markus Lehtisalo, Kari Stadius, Heorhii Bohuslavskyi, Klaara Viisanen, Jussi Ryynänen, Andrey Generalov

Published Dec 13, 2025• 0 citations
Publisher

Abstract

The superconducting transistor, or Josephson Field Effect Transistor (JoFET), is a versatile building block for ultra-low-power and high-energy-efficiency classical and quantum electronics. In a JoFET, the superconducting (zero-resistance) current is controlled by electrostatic gate voltage, which enables the scalability of solid-state quantum computers and the creation of next-generation superconducting integrated circuits (ICs). The development of JoFETs has so far been limited to single devices or a few-transistor circuits due to the lack of reproducible technological platform. Here, we report on technological progress of wafer-scale JoFET fabrication, achieving a 98% yield on a 150 mm wafer platform. Now that the large-scale and reproducible fabrication JoFETs has become feasible, we present behavioral and physics models as the required steps toward the design of novel JoFET-based ICs. Using the presented models, we obtain a good description of experimental data, thus paving the way for the design of next-generation superconducting ICs.

DOI
10.1109/icee67165.2025.11409831

Related papers

Device Models for Josephson Field-Effect Transistors and for Superconducting Integrated Circuits

Shanuka Gamaethige, Markus Lehtisalo, Heorhii Bohuslavskyi +4 more

The superconducting transistor, or Josephson Field Effect Transistor (JoFET), is a versatile building block for ultra-low-power and high-energy-efficiency classical and quantum electronics. In a JoFET, the superconducting current is controlled by electrostatic gate voltage, which enables the scalability of solid-state quantum computers and the creation of next-generation superconducting integrated circuits (ICs) for energy-efficient computing. The development of JoFETs has so far been limited to single devices or a few-transistor circuits due to the lack of a reproducible technological platform. Here, we first report on technological progress of wafer-scale JoFET manufacturing, demonstrating a 98% JoFET device yield on our 150 mm pilot-line platform. Then, we present behavioral and physics-based transistor models - an important step toward designing of novel JoFET-based superconducting ICs. Our models have been implemented in both commercial and freeware circuit simulators. A Verilog-A model implementation is provided with this paper. Using the proposed models, we obtain a good description of JoFET experimental data, thus paving the way for the large-scale design of next-generation superconducting ICs.

IEEE Journal of the Electron Devices Society•Jan 1, 2026•0 citations

Ultra-Efficient Superconducting Dayem Bridge Field-Effect Transistor

Federico Paolucci, Giorgio De Simoni, Elia Strambini +2 more

Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric-field-induced control of charge-carrier concentration to modulate the channel superconducting properties. Despite the fact that the field-effect is believed to be ineffective for superconducting metals, recent experiments showed electric-field-dependent modulation of the critical current ( I C ) in a fully metallic transistor. However, the grounding mechanism of this phenomenon is not completely understood. Here, we show the experimental realization of Ti-based Dayem bridge field-effect transistors (DB–FETs) able to control the I C of the superconducting channel. Our easy fabrication process for DB–FETs show symmetric full suppression of I C for applied critical gate voltages as low as V G C ≃ ±8 V at temperatures reaching about the 85% of the record critical temperature, T C ≃ 550 mK, for titanium. The gate-independent T C and normal-state resistance ( R N ) coupled with the increase of resistance in the superconducting state ( R S ) for gate voltages close to the critical value ( V G C ) suggest the creation of field-effect induced metallic puddles in the superconducting sea. Our devices show extremely high values of transconductance (| g m MAX | ≃ 15 μA/V at V G ≃ ±6.5 V) and variations of Josephson kinetic inductance ( L K ) with V G of 2 orders of magnitude. Therefore, the DB–FET appears as an ideal candidate for the realization of superconducting electronics, superconducting qubits, and tunable interferometers as well as photon detectors.

arXiv:1803.04925•Nano Letters•Jun 12, 2018•65 citations

Wafer-Scale Fabrication Technologies for Integrated Superconducting Quantum Circuits

L. Kaczmarek, Matthias Schmelz, Katja Peiselt +4 more

In the upcoming decades quantum technologies, especially quantum computation, will have a strong influence on industrial, technological, economic, and social progress and are, therefore, considered to be one of the key technologies. The fundamental building blocks for quantum computation are quantum bits (qubits). The superconducting platform offers one of the most promising implementations due to its monolithic character and potential for scalability. Present research around the world primarily focusses on scaling up the number of qubits, so reliable wafer-scale fabrication technologies are mandatory. In this paper, we present our recent developments on wafer-scale fabrication of superconducting quantum circuits including Josephson junctions by the Manhattan-type technology. We discuss fabrication parameters as well as electrical characterization. For arrays out of 50 Josephson junctions with structure dimensions of 200 nm × 200 nm, we achieve a critical current standard deviation of approx. 3% on-chip and 7% on-wafer. We also show first measurement results of so fabricated transmon-type qubits with relaxation and decoherence times ofT1= 12.5 µs andT2= 15.0 µs, respectively. With an increasing number of superconducting qubits and, thus, their input and read-out lines, new challenges arise: Crosstalk between qubits, unwanted modes in the qubit environment, and required interconnections. One way to counteract is the implementation of low inductance connections across coplanar waveguides. This can be realized by aluminum air bridges. In this paper we discuss the air bridges’ fabrication parameters and the impact on the integrated circuits’ elements, e.g., Josephson junctions. We show electrical and superconducting measurements with critical temperatures and critical currents ofTc> 1.0 K andIc> 0.6 mA, respectively.

IEEE Transactions on Applied Superconductivity•Dec 13, 2024•6 citations

Wafer-Scale Al Junction Technology for Superconducting Quantum Circuits

Matthias Schmelz, E. Mutsenik, S. Bravin +8 more

Josephson tunnel junctions represent a key element in superconducting electronics and quantum circuits. For many years, shadow evaporation by means of Dolan-type bridges has been the state-of-the-art for deep sub- micrometer sized structures. Increasing demand in the number of Josephson junctions, e.g. in qubit circuits and travelling wave parametric amplifiers, requests for a wafer-scale fabrication process with precise control of junction parameters and have led to an advanced lift-off technique called Manhattan-type junction technology in recent years. Herein, we report on the development of a 100 mm wafer-scale fabrication technology for deep sub-micrometer sized Al Josephson junctions with linear dimensions down to 180 nm. The critical currentICof the junctions ranges from about 10 to 120 nA scaling with their linear dimensions. Low temperature transport measurements as well as room-temperature characterization has been used forICand process homogeneity determination of series arrays of up to 50 Josephson junctions. We discuss technology parameters such as yield, on-chip and on-wafer reproducibility of the junction's critical currents as well as main process limitations. Moreover, we present experimental results on the characterization of first transmon-type qubits fabricated using this technology.

IEEE Transactions on Applied Superconductivity•Feb 9, 2024•8 citations

Enabling 300 mm Wafer-Scale Fabrication of Superconducting Quantum Devices

Ekta Bhatia, Hunter Frost, Nicholas Pieniazek +13 more

Superconducting quantum computing has demonstrated exponential improvements in coherence times over the past two decades, bringing us to the present Noisy Intermediate Scale Quantum (NISQ) era. Improvements in materials and fabrication techniques are still required along with circuit and algorithm innovations to move beyond the NISQ era. We discuss several aspects of the process development work that enables the fabrication of superconducting quantum devices and circuits at 300 mm wafer scale, using materials, processes and tools that are entirely compatible with high-volume integrated circuit fabs. Damascene structures of superconducting tantalum and aluminum (embedded in high resistivity silicon substrates) are described along with examples of process control. The use of such structures for coplanar waveguide resonators in quantum circuits is described, along with modifications to enable integration of normal metal traps to mitigate quasiparticle poisoning. This paper also includes a description of the considerable process development required to enable ALD-TaN based Josephson junctions fabricated with entirely 300 mm compatible processes, in contrast to the lift-off based processes currently in wide use for qubit fabrication. It concludes with a description of how these efforts help with establishing a Quantum Foundry at NY CREATES (a non-profit organization) that can democratize access to advanced qubit fabrication by offering an open superconducting quantum Process Design Kit (PDK).

ASMC proceedings•May 13, 2024•6 citations

Reimagining Voltage-Controlled Cryogenic Boolean Logic Paradigm with Quantum-Enhanced Josephson Junction FETs

Md Mazharul Islam, Diego Ferrer, Shamiul Alam +4 more

The growing demand for ultra low power computing and the emergence of quantum technologies have intensified interest in cryogenic electronics, particularly superconducting devices. Despite their promise, current controlled superconducting components face fundamental challenges in cascadability, limiting their effectiveness in complex logic architectures. To overcome this, recent efforts have focused on developing gate tunable superconducting devices, such as Josephson junction field effect transistors (JJFETs). However, achieving robust control and sufficient supercurrent gain, both critical for transistor-like performance in logic circuits remains a key challenge. A recent advancement in JJFET design, based on InAs and GaSb heterostructures, demonstrates enhanced gain and favorable device characteristics suitable for circuit integration. Building on this innovation, we propose and analyze fundamental voltage controlled logic topologies using the quantum enhanced JJFET. We develop a Verilog A based circuit compatible compact model of the quantum enhanced JJFET which accurately captures the experimentally observed device characteristics. To ensure cascadability, our logic circuits incorporate the multilayered Heater Nanocryotron (nTron), a superconducting nanowire-based thermal switch. Through simulation based analysis, we demonstrate the successful implementation of fundamental logic gates, including NOT, NAND, and NOR. Furthermore, we design a 3 input majority gate, which plays a pivotal role in quantum and reversible computing due to its universality. Finally, to demonstrate the cascadability of our proposed logic topology, we demonstrate the operation of a 2 input XOR gate based on our designed JJFET based NOT, NAND, and NOR gate.

arXiv:2508.00295•Aug 1, 2025•1 citation
The superconducting transistor, or Josephson Field Effect Transistor (JoFET), is a versatile building block for ultra-low-power and high-energy-efficiency classical and quantum electronics. In a JoFET, the superconducting (zero-resistance) current is controlled by electrostatic gate voltage, which enables the scalability of solid-state quantum computers and the creation of next-generation superconducting integrated circuits (ICs). The development of JoFETs has so far been limited to single devices or a few-transistor circuits due to the lack of reproducible technological platform. Here, we report on technological progress of wafer-scale JoFET fabrication, achieving a 98% yield on a 150 mm wafer platform. Now that the large-scale and reproducible fabrication JoFETs has become feasible, we present behavioral and physics models as the required steps toward the design of novel JoFET-based ICs. Using the presented models, we obtain a good description of experimental data, thus paving the way for the design of next-generation superconducting ICs.
The superconducting transistor, or Josephson Field Effect Transistor (JoFET), is a versatile building block for ultra-low-power and high-energy-efficiency classical and quantum electronics. In a JoFET, the superconducting current is controlled by electrostatic gate voltage, which enables the scalability of solid-state quantum computers and the creation of next-generation superconducting integrated circuits (ICs) for energy-efficient computing. The development of JoFETs has so far been limited to single devices or a few-transistor circuits due to the lack of a reproducible technological platform. Here, we first report on technological progress of wafer-scale JoFET manufacturing, demonstrating a 98% JoFET device yield on our 150 mm pilot-line platform. Then, we present behavioral and physics-based transistor models - an important step toward designing of novel JoFET-based superconducting ICs. Our models have been implemented in both commercial and freeware circuit simulators. A Verilog-A model implementation is provided with this paper. Using the proposed models, we obtain a good description of JoFET experimental data, thus paving the way for the large-scale design of next-generation superconducting ICs.
Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric-field-induced control of charge-carrier concentration to modulate the channel superconducting properties. Despite the fact that the field-effect is believed to be ineffective for superconducting metals, recent experiments showed electric-field-dependent modulation of the critical current ( I C ) in a fully metallic transistor. However, the grounding mechanism of this phenomenon is not completely understood. Here, we show the experimental realization of Ti-based Dayem bridge field-effect transistors (DB–FETs) able to control the I C of the superconducting channel. Our easy fabrication process for DB–FETs show symmetric full suppression of I C for applied critical gate voltages as low as V G C ≃ ±8 V at temperatures reaching about the 85% of the record critical temperature, T C ≃ 550 mK, for titanium. The gate-independent T C and normal-state resistance ( R N ) coupled with the increase of resistance in the superconducting state ( R S ) for gate voltages close to the critical value ( V G C ) suggest the creation of field-effect induced metallic puddles in the superconducting sea. Our devices show extremely high values of transconductance (| g m MAX | ≃ 15 μA/V at V G ≃ ±6.5 V) and variations of Josephson kinetic inductance ( L K ) with V G of 2 orders of magnitude. Therefore, the DB–FET appears as an ideal candidate for the realization of superconducting electronics, superconducting qubits, and tunable interferometers as well as photon detectors.
In the upcoming decades quantum technologies, especially quantum computation, will have a strong influence on industrial, technological, economic, and social progress and are, therefore, considered to be one of the key technologies. The fundamental building blocks for quantum computation are quantum bits (qubits). The superconducting platform offers one of the most promising implementations due to its monolithic character and potential for scalability. Present research around the world primarily focusses on scaling up the number of qubits, so reliable wafer-scale fabrication technologies are mandatory. In this paper, we present our recent developments on wafer-scale fabrication of superconducting quantum circuits including Josephson junctions by the Manhattan-type technology. We discuss fabrication parameters as well as electrical characterization. For arrays out of 50 Josephson junctions with structure dimensions of 200 nm × 200 nm, we achieve a critical current standard deviation of approx. 3% on-chip and 7% on-wafer. We also show first measurement results of so fabricated transmon-type qubits with relaxation and decoherence times ofT1= 12.5 µs andT2= 15.0 µs, respectively. With an increasing number of superconducting qubits and, thus, their input and read-out lines, new challenges arise: Crosstalk between qubits, unwanted modes in the qubit environment, and required interconnections. One way to counteract is the implementation of low inductance connections across coplanar waveguides. This can be realized by aluminum air bridges. In this paper we discuss the air bridges’ fabrication parameters and the impact on the integrated circuits’ elements, e.g., Josephson junctions. We show electrical and superconducting measurements with critical temperatures and critical currents ofTc> 1.0 K andIc> 0.6 mA, respectively.
Josephson tunnel junctions represent a key element in superconducting electronics and quantum circuits. For many years, shadow evaporation by means of Dolan-type bridges has been the state-of-the-art for deep sub- micrometer sized structures. Increasing demand in the number of Josephson junctions, e.g. in qubit circuits and travelling wave parametric amplifiers, requests for a wafer-scale fabrication process with precise control of junction parameters and have led to an advanced lift-off technique called Manhattan-type junction technology in recent years. Herein, we report on the development of a 100 mm wafer-scale fabrication technology for deep sub-micrometer sized Al Josephson junctions with linear dimensions down to 180 nm. The critical currentICof the junctions ranges from about 10 to 120 nA scaling with their linear dimensions. Low temperature transport measurements as well as room-temperature characterization has been used forICand process homogeneity determination of series arrays of up to 50 Josephson junctions. We discuss technology parameters such as yield, on-chip and on-wafer reproducibility of the junction's critical currents as well as main process limitations. Moreover, we present experimental results on the characterization of first transmon-type qubits fabricated using this technology.
Superconducting quantum computing has demonstrated exponential improvements in coherence times over the past two decades, bringing us to the present Noisy Intermediate Scale Quantum (NISQ) era. Improvements in materials and fabrication techniques are still required along with circuit and algorithm innovations to move beyond the NISQ era. We discuss several aspects of the process development work that enables the fabrication of superconducting quantum devices and circuits at 300 mm wafer scale, using materials, processes and tools that are entirely compatible with high-volume integrated circuit fabs. Damascene structures of superconducting tantalum and aluminum (embedded in high resistivity silicon substrates) are described along with examples of process control. The use of such structures for coplanar waveguide resonators in quantum circuits is described, along with modifications to enable integration of normal metal traps to mitigate quasiparticle poisoning. This paper also includes a description of the considerable process development required to enable ALD-TaN based Josephson junctions fabricated with entirely 300 mm compatible processes, in contrast to the lift-off based processes currently in wide use for qubit fabrication. It concludes with a description of how these efforts help with establishing a Quantum Foundry at NY CREATES (a non-profit organization) that can democratize access to advanced qubit fabrication by offering an open superconducting quantum Process Design Kit (PDK).
The growing demand for ultra low power computing and the emergence of quantum technologies have intensified interest in cryogenic electronics, particularly superconducting devices. Despite their promise, current controlled superconducting components face fundamental challenges in cascadability, limiting their effectiveness in complex logic architectures. To overcome this, recent efforts have focused on developing gate tunable superconducting devices, such as Josephson junction field effect transistors (JJFETs). However, achieving robust control and sufficient supercurrent gain, both critical for transistor-like performance in logic circuits remains a key challenge. A recent advancement in JJFET design, based on InAs and GaSb heterostructures, demonstrates enhanced gain and favorable device characteristics suitable for circuit integration. Building on this innovation, we propose and analyze fundamental voltage controlled logic topologies using the quantum enhanced JJFET. We develop a Verilog A based circuit compatible compact model of the quantum enhanced JJFET which accurately captures the experimentally observed device characteristics. To ensure cascadability, our logic circuits incorporate the multilayered Heater Nanocryotron (nTron), a superconducting nanowire-based thermal switch. Through simulation based analysis, we demonstrate the successful implementation of fundamental logic gates, including NOT, NAND, and NOR. Furthermore, we design a 3 input majority gate, which plays a pivotal role in quantum and reversible computing due to its universality. Finally, to demonstrate the cascadability of our proposed logic topology, we demonstrate the operation of a 2 input XOR gate based on our designed JJFET based NOT, NAND, and NOR gate.