Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EEDT: Measurement-Gated Quantum Error Correction for NISQ Calibration Drift

Takeshi Okuda

Published Feb 28, 2026• 0 citations
Publisher

Abstract

Noisy Intermediate-Scale Quantum (NISQ) devices suffer from calibration drift—slow, coherent phase errors accumulating between active corrections. We present EEDT (Entanglement-Enhanced Dynamical Tracking), a measurement-gated quantum error correction protocol utilizing noisy measurements to dictate intervention timing. Initial Lindblad simulations yielded a counterintuitive 339% deviation from theoretical bounds, which we identify as the Golden Eye collapse in low-noise regimes (σ_ro < 3%). This motivates a bifurcated theoretical model incorporating Golden Eye Occupancy (high-σ) and noise-floor saturation (low-σ) regimes, achieving 78% prediction accuracy improvement over prior models, with the critical threshold σ_c ≈ 2% analytically derived. New in v8: We report the first statistically significant real-hardware demonstration on three IBM Heron devices (ibm_fez, ibm_torino, ibm_marrakesh). After systematic qubit selection (ε_01 = 1.18%) and direct ZZ Ramsey measurement (ν_ZZ = 0.13 kHz), the stroboscopic CDQEM protocol achieves a correction gain of +0.112 at N_meas = 8 with 2.7σ significance on ibm_marrakesh, confirming the MCM post-selection effect predicted by the stroboscopic convergence theorem. All code, data, and IBM Quantum job IDs are publicly available.

DOI
10.5281/zenodo.18809138

Related papers

Experimental Observation of Measurement-Induced Phase Transitions on NISQ Processors via Feedback-Stabilized Criticality

Angel Jose Toranzo Portela

Measurement-induced phase transitions (MIPT) offer a novel paradigm for exploring quantum criticality, yet their experimental observation remains stifled by the "post-selection problem"—the exponential cost of resolving quantum trajectories. Here, we propose a scalable protocol to observe feedback-stabilized criticality on current Noisy Intermediate-Scale Quantum (NISQ) processors, eliminating the need for post-selection. By coupling local measurements to real-time unitary feedback, we demonstrate that a many-body quantum system can be steered toward the universal 1/e information horizon, effectively turning the measurement back-action from a source of decoherence into a resource for complexity. Extensive numerical simulations incorporating realistic depolarizing noise reveal a robust stability plateau extending to gate error rates of p ≈ 10⁻², compatible with state-of-the-art superconducting architectures such as IBM Heron. Furthermore, we introduce a verification scheme based on classical shadows to efficiently estimate the Schmidt concentration ⟨K_c⟩ without full tomography. Our results establish that thermodynamic error correction is achievable in the NISQ era, providing a blueprint for the first experimental observation of a feedback-induced phase transition at the mesoscopic scale (N ~ 100).

•Jan 18, 2026•0 citations

On the Use of Calibration Data in Error-Aware Compilation Techniques for NISQ Devices

Handy Kurniawan, Laura Rodríguez-Soriano, Daniele Cuomo +2 more

Reliably executing quantum algorithms on noisy intermediate-scale quantum (NISQ) devices is challenging, as they are severely constrained and prone to errors. Efficient quantum circuit compilation techniques are therefore crucial for overcoming their limitations and dealing with their high error rates. These techniques consider the quantum hardware restrictions, such as the limited qubit connectivity, and perform some transformations to the original circuit that can be executed on a given quantum processor. Certain compilation methods use error information based on calibration data to further improve the success probability or the fidelity of the circuit to be run. However, it is uncertain to what extent incorporating calibration information in the compilation process can enhance the circuit performance. For instance, considering the most recent error data provided by vendors after calibrating the processor might not be functional enough as quantum systems are subject to drift, making the latest calibration data obsolete within minutes. In this paper, we explore how different usage of calibration data impacts the circuit fidelity, by using several compilation techniques and quantum processors (IBM Perth and Brisbane). To this aim, we implemented a framework that incorporates some of the state-of-the-art noise-aware and non-noise-aware compilation techniques and allows the user to perform fair comparisons under similar processor conditions. Our experiments yield valuable insights into the effects of noise-aware methodologies and the employment of calibration data. The main finding is that pre-processing historical calibration data can improve fidelity when real-time calibration data is not available due to factors such as cloud service latency and waiting queues between compilation and execution on the quantum backend.

arXiv:2407.21462•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•21 citations

A useful metric for the NISQ era: Qubit error probability and its role in zero noise extrapolation

Nahual Sobrino, Unai Aseginolaza, Joaquim Jornet-Somoza +1 more

Accurate assessment and management of errors is indispensable for extracting useful results from noisy intermediate-scale quantum devices. In this work, we propose the qubit error probability (QEP), a device specific metric that combines relaxation, dephasing, gate, and measurement contributions into a single per qubit figure of merit computable before execution. Leveraging QEP as the control variable, we revisit zero noise extrapolation (ZNE) by adding pairs of controlled native two-qubit gates on all connected qubit pairs to generate circuits with successively larger mean QEP; the zero error limit is then approximated by a linear regression of the measured observable against those values. Benchmarking on IBM Quantum Heron processors, we apply QEP guided ZNE to first order Trotterized simulations of the two dimensional transverse field Ising model, chosen as a representative interacting many body system, involving up to 68 qubits and 15 Trotter steps. In regimes where the raw circuits exhibit a finite mean QEP, the method suppresses observable errors beyond those attainable with circuit depth scaled ZNE, while requiring only three noise scaled evaluations and no additional classical post processing. These results demonstrate that QEP serves as a transparent and efficient error metric and that its integration into ZNE provides a practical route to reliability gains on current superconducting hardware, without the resource costs associated with full quantum error correction.

arXiv:2503.10204•AVS Quantum Science•Feb 13, 2026•3 citations

Enhancing quantum computation accuracy on IBM quantum hardware through advanced error mitigation strategies

V. Karthick, D Lakshanya, P. M. Ashok Kumar

Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.

Discover Quantum Science•May 20, 2026•2 citations

Quantum Antifragility: NISQ Noise Feeds Integrated Information via Zero-Noise Extrapolation

Cruz Sanchez

We present the first experimental demonstration that quantum noise is informative, not merely destructive — validating Theorem 8 of IIT 5.1 (FEP-MaxCal Bridge). Using a 5-qubit GHZ circuit on an AerSimulator calibrated with real IBM Quantum ibm_fez noise parameters (T1=320µs, T2=150µs, gate2q error=2.83e-3), we show that Zero Noise Extrapolation (ZNE) recovers integrated information (Φ) to a value exceeding the noiseless ideal: Φ_ZNE = 1.1736 > Φ_ideal = 0.9999 (permutation test, p < 0.000001, N=20 runs, 8192 shots each, 10000 bootstrap resamples). ZNE requires controlled noise scaling (identity folding at λ = 1, 2, 3) that is only feasible in simulation; however, the noise model is calibrated from 3766 real IBM Quantum jobs across 6 backends, and prior hardware experiments on ibm_fez (V1: Φ=0.757, V2: Φ=0.832 with ZNE on real hardware) validate the baseline metrics. The experiment follows a four-phase paradigm: (1) Baseline: GHZ-5 ideal yields Φ=0.9999; (2) Attack: NISQ noise degrades Φ to 0.8804 (-12%); (3) Recovery: Hahn Echo alone shows no significant improvement (p=0.853), but ZNE with 3-scale identity folding and linear extrapolation to noise=0 yields Φ=1.1736; (4) Antifragility: the recovered system exceeds the original baseline by +17.4%. Additional findings: Φ scales monotonically with qubit count (2q→7q), distinguishes entanglement topology (GHZ > W-state > Cluster ≈ Separable), is robust across 4 IBM backend noise models (CV=3.35%), and decays exponentially with circuit depth (τ=29.52 layers). Hardware validation on real ibm_fez confirms Φ for entangled vs separable circuits with Cohen's d = 191.3 (p < 0.0001).

•Aug 8, 2026•0 citations

Low-Overhead Quantum Error Correction Codes for Noisy Intermediate-Scale Quantum Devices

D. Jagadeesan, A. B. Manju, G. Asha +4 more

Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.

•Mar 23, 2026•0 citations
Noisy Intermediate-Scale Quantum (NISQ) devices suffer from calibration drift—slow, coherent phase errors accumulating between active corrections. We present EEDT (Entanglement-Enhanced Dynamical Tracking), a measurement-gated quantum error correction protocol utilizing noisy measurements to dictate intervention timing. Initial Lindblad simulations yielded a counterintuitive 339% deviation from theoretical bounds, which we identify as the Golden Eye collapse in low-noise regimes (σ_ro < 3%). This motivates a bifurcated theoretical model incorporating Golden Eye Occupancy (high-σ) and noise-floor saturation (low-σ) regimes, achieving 78% prediction accuracy improvement over prior models, with the critical threshold σ_c ≈ 2% analytically derived. New in v8: We report the first statistically significant real-hardware demonstration on three IBM Heron devices (ibm_fez, ibm_torino, ibm_marrakesh). After systematic qubit selection (ε_01 = 1.18%) and direct ZZ Ramsey measurement (ν_ZZ = 0.13 kHz), the stroboscopic CDQEM protocol achieves a correction gain of +0.112 at N_meas = 8 with 2.7σ significance on ibm_marrakesh, confirming the MCM post-selection effect predicted by the stroboscopic convergence theorem. All code, data, and IBM Quantum job IDs are publicly available.
Measurement-induced phase transitions (MIPT) offer a novel paradigm for exploring quantum criticality, yet their experimental observation remains stifled by the "post-selection problem"—the exponential cost of resolving quantum trajectories. Here, we propose a scalable protocol to observe feedback-stabilized criticality on current Noisy Intermediate-Scale Quantum (NISQ) processors, eliminating the need for post-selection. By coupling local measurements to real-time unitary feedback, we demonstrate that a many-body quantum system can be steered toward the universal 1/e information horizon, effectively turning the measurement back-action from a source of decoherence into a resource for complexity. Extensive numerical simulations incorporating realistic depolarizing noise reveal a robust stability plateau extending to gate error rates of p ≈ 10⁻², compatible with state-of-the-art superconducting architectures such as IBM Heron. Furthermore, we introduce a verification scheme based on classical shadows to efficiently estimate the Schmidt concentration ⟨K_c⟩ without full tomography. Our results establish that thermodynamic error correction is achievable in the NISQ era, providing a blueprint for the first experimental observation of a feedback-induced phase transition at the mesoscopic scale (N ~ 100).
Reliably executing quantum algorithms on noisy intermediate-scale quantum (NISQ) devices is challenging, as they are severely constrained and prone to errors. Efficient quantum circuit compilation techniques are therefore crucial for overcoming their limitations and dealing with their high error rates. These techniques consider the quantum hardware restrictions, such as the limited qubit connectivity, and perform some transformations to the original circuit that can be executed on a given quantum processor. Certain compilation methods use error information based on calibration data to further improve the success probability or the fidelity of the circuit to be run. However, it is uncertain to what extent incorporating calibration information in the compilation process can enhance the circuit performance. For instance, considering the most recent error data provided by vendors after calibrating the processor might not be functional enough as quantum systems are subject to drift, making the latest calibration data obsolete within minutes. In this paper, we explore how different usage of calibration data impacts the circuit fidelity, by using several compilation techniques and quantum processors (IBM Perth and Brisbane). To this aim, we implemented a framework that incorporates some of the state-of-the-art noise-aware and non-noise-aware compilation techniques and allows the user to perform fair comparisons under similar processor conditions. Our experiments yield valuable insights into the effects of noise-aware methodologies and the employment of calibration data. The main finding is that pre-processing historical calibration data can improve fidelity when real-time calibration data is not available due to factors such as cloud service latency and waiting queues between compilation and execution on the quantum backend.
Accurate assessment and management of errors is indispensable for extracting useful results from noisy intermediate-scale quantum devices. In this work, we propose the qubit error probability (QEP), a device specific metric that combines relaxation, dephasing, gate, and measurement contributions into a single per qubit figure of merit computable before execution. Leveraging QEP as the control variable, we revisit zero noise extrapolation (ZNE) by adding pairs of controlled native two-qubit gates on all connected qubit pairs to generate circuits with successively larger mean QEP; the zero error limit is then approximated by a linear regression of the measured observable against those values. Benchmarking on IBM Quantum Heron processors, we apply QEP guided ZNE to first order Trotterized simulations of the two dimensional transverse field Ising model, chosen as a representative interacting many body system, involving up to 68 qubits and 15 Trotter steps. In regimes where the raw circuits exhibit a finite mean QEP, the method suppresses observable errors beyond those attainable with circuit depth scaled ZNE, while requiring only three noise scaled evaluations and no additional classical post processing. These results demonstrate that QEP serves as a transparent and efficient error metric and that its integration into ZNE provides a practical route to reliability gains on current superconducting hardware, without the resource costs associated with full quantum error correction.
Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.
We present the first experimental demonstration that quantum noise is informative, not merely destructive — validating Theorem 8 of IIT 5.1 (FEP-MaxCal Bridge). Using a 5-qubit GHZ circuit on an AerSimulator calibrated with real IBM Quantum ibm_fez noise parameters (T1=320µs, T2=150µs, gate2q error=2.83e-3), we show that Zero Noise Extrapolation (ZNE) recovers integrated information (Φ) to a value exceeding the noiseless ideal: Φ_ZNE = 1.1736 > Φ_ideal = 0.9999 (permutation test, p < 0.000001, N=20 runs, 8192 shots each, 10000 bootstrap resamples). ZNE requires controlled noise scaling (identity folding at λ = 1, 2, 3) that is only feasible in simulation; however, the noise model is calibrated from 3766 real IBM Quantum jobs across 6 backends, and prior hardware experiments on ibm_fez (V1: Φ=0.757, V2: Φ=0.832 with ZNE on real hardware) validate the baseline metrics. The experiment follows a four-phase paradigm: (1) Baseline: GHZ-5 ideal yields Φ=0.9999; (2) Attack: NISQ noise degrades Φ to 0.8804 (-12%); (3) Recovery: Hahn Echo alone shows no significant improvement (p=0.853), but ZNE with 3-scale identity folding and linear extrapolation to noise=0 yields Φ=1.1736; (4) Antifragility: the recovered system exceeds the original baseline by +17.4%. Additional findings: Φ scales monotonically with qubit count (2q→7q), distinguishes entanglement topology (GHZ > W-state > Cluster ≈ Separable), is robust across 4 IBM backend noise models (CV=3.35%), and decays exponentially with circuit depth (τ=29.52 layers). Hardware validation on real ibm_fez confirms Φ for entangled vs separable circuits with Cohen's d = 191.3 (p < 0.0001).
Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.