Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Information Theory

On the Insdel Error-Correcting Capacities of Binary Reed–Muller Codes and Simplex Codes

Runqing Qiu, Shixin Zhu, Yang Li, Zhonghua Sun

Published Feb 13, 2026• 0 citations
Publisher

Abstract

Insertion-deletion (insdel for short) codes have received extensive attention due to their ability to correct synchronization errors. It is usually a very challenging problem to determine the insdel distances of linear codes. In this paper, a good lower bound on the insdel distance of a linear code with a certain algebraic structure is provided and it indeed gives an affirmative answer to an open problem proposed by Hao Chen (IEEE Transactions on Information Theory, 68(8): 5126–5132, 2022). Applying this lower bound to binary first-order Reed-Muller codes and binary simplex codes, we obtain that they possess linear subcodes that can correct arbitrary insdel errors while maintaining Hamming distances robustness. The application of this bound on Reed-Muller codes completely solves an open problem left by Lara Dolecek and Venkat Anantharam (IEEE Transactions on Information Theory, 53(4): 1430–1443, 2007). In order to enhance the code rate, we further perform puncturing on these subcodes and determine the Hamming distances of the punctured subcodes while ensuring that their insdel distances remain unchanged.

DOI
10.1109/tit.2026.3664473

Related papers

On the Stopping Redundancy of Reed–Muller Codes

Tuvi Etzion

The stopping redundancy of the code is an important parameter which arises from analyzing the performance of a linear code under iterative decoding on a binary erasure channel. In this paper, we will consider the stopping redundancy of Reed-Muller codes and related codes. Let R(lscr,m) be the Reed-Muller code of length 2mand order lscr. Schwartz and Vardy gave a recursive construction of parity-check matrices for the Reed-Muller codes, and asked whether the number of rows in those parity-check matrices is the stopping redundancy of the codes. We prove that the stopping redundancy of R(m-2,m), which is also the extended Hamming code of length 2m, is 2m-1 and thus show that the recursive bound is tight in this case. We prove that the stopping redundancy of the simplex code equals its redundancy. Several constructions of codes for which the stopping redundancy equals the redundancy are discussed. We prove an upper bound on the stopping redundancy of R(1,m). This bound is better than the known recursive bound and thus gives a negative answer to the question of Schwartz and Vardy

IEEE Transactions on Information Theory•Oct 30, 2006•40 citations

Soft-decision list decoding of Reed-Muller codes with linear complexity

Ilya I. Dumer, Grigory A. Kabatiansky, Cédric Tavernier

Let a binary Reed-Muller code RM(s;m) of length n be used on a memoryless channel with an input alphabet ±1 and a real-valued output ℝ. Given a received vector y in ℝn; we define its generalized distance T to any codeword c as the sum Σ|yj|taken over all positions j, in which vectors y, c have opposite signs. We then consider the list ℒTof codewords located within distance T from the received vector y and estimate the size LTof this list using the generalized Johnson bound. For any RM code RM(s,m) of fixed order s, the algorithm is proposed that performs list decoding beyond the error-correcting radius with linear complexity in length n and retrieves the code list ℒTwith complexity of order nsLTfor any decoding radius T within the generalized Johnson bound.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2011•1 citation

Kodning och avkodning av Reed-Muller koder

Meyer, Linda

In this thesis some families of linear error correcting codes are presented. The reader will find a general description of binary codes and more specific details about linear codes such as Hamming, repetition codes, Reed-Muller codes, etc. To fully immerse ourselves in the methods of coding and decoding, we will introduce examples in order to contribute to the understanding of the theories. In these times of much communication through computer technology, our daily lives involve a substantial amount of data transmission. It is essential that these data are transmitted without errors through the communication channels. Therefore, the scientific field of error-correcting codes holds a significant importance in many aspects of todays society. The main goal of this thesis is to study linear block codes which belong to the class of binary codes. In this case we will attribute a more prominent role to first order Reed-Muller codes.

•Jan 1, 2021•0 citations

Soft-Decision List Decoding with Linear Complexity for the First-Order Reed-Muller Codes

Ilya I. Dumer, Grigory A. Kabatiansky, Cédric Tavernier

Soft-decision decoding on a memoryless channel is considered for the first-order Reed-Muller codes RM (1, m) of length 2m. We assume that different positions j of the received binary vector y can be corrupted by the errors of varying weight wj. The generalized Hamming distance between vector y and any binary vector c is then defined as the sum of weighted differences wj|yj- cj| taken over all n positions. We obtain a tight upper bound LTon the number of codewords located within generalized Hamming distance T from vector y, and design a decoding algorithm that outputs this list of codewords with complexity O (n ln2LT). In particular, all possible error weights wjequal 1 if this combinatorial model is applied to a binary symmetric channel. In this case, the well known Green algorithm performs full maximum likelihood decoding of RM (1, m) and requires O (n ln2n) bit operations, whereas the Litsyn-Shekhovtsov algorithm operates within the bounded-distance decoding radius n/4-1 with linear complexity O(n). We close the performance-complexity gap between the two algorithms. Namely, for any fixed (0, ½), our algorithm outputs the complete list of codewords within the decoding radius n(½-) with linear complexity of order n ln2.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2007•2 citations

On the stopping distance and the stopping redundancy of codes

M. Schwartz, Alexander Vardy

It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s=d. We thus introduce a new parameter, the stopping redundancy of Copf, defined as the minimum number of rows in a parity- check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely, s(H)=d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes

arXiv:cs/0503058•IEEE Transactions on Information Theory•Mar 1, 2006•176 citations

On the stopping distance and the stopping redundancy of codes

M. Schwartz, Alexander Vardy

It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s = d. We thus introduce a new parameter, termed the stopping redundancy of Copf, defined as the minimum number of rows in a parity-check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely s(H) = d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes

IEEE International Symposium on Information Theory (ISIT)•Jan 1, 2005•27 citations
Insertion-deletion (insdel for short) codes have received extensive attention due to their ability to correct synchronization errors. It is usually a very challenging problem to determine the insdel distances of linear codes. In this paper, a good lower bound on the insdel distance of a linear code with a certain algebraic structure is provided and it indeed gives an affirmative answer to an open problem proposed by Hao Chen (IEEE Transactions on Information Theory, 68(8): 5126–5132, 2022). Applying this lower bound to binary first-order Reed-Muller codes and binary simplex codes, we obtain that they possess linear subcodes that can correct arbitrary insdel errors while maintaining Hamming distances robustness. The application of this bound on Reed-Muller codes completely solves an open problem left by Lara Dolecek and Venkat Anantharam (IEEE Transactions on Information Theory, 53(4): 1430–1443, 2007). In order to enhance the code rate, we further perform puncturing on these subcodes and determine the Hamming distances of the punctured subcodes while ensuring that their insdel distances remain unchanged.
The stopping redundancy of the code is an important parameter which arises from analyzing the performance of a linear code under iterative decoding on a binary erasure channel. In this paper, we will consider the stopping redundancy of Reed-Muller codes and related codes. Let R(lscr,m) be the Reed-Muller code of length 2mand order lscr. Schwartz and Vardy gave a recursive construction of parity-check matrices for the Reed-Muller codes, and asked whether the number of rows in those parity-check matrices is the stopping redundancy of the codes. We prove that the stopping redundancy of R(m-2,m), which is also the extended Hamming code of length 2m, is 2m-1 and thus show that the recursive bound is tight in this case. We prove that the stopping redundancy of the simplex code equals its redundancy. Several constructions of codes for which the stopping redundancy equals the redundancy are discussed. We prove an upper bound on the stopping redundancy of R(1,m). This bound is better than the known recursive bound and thus gives a negative answer to the question of Schwartz and Vardy
Let a binary Reed-Muller code RM(s;m) of length n be used on a memoryless channel with an input alphabet ±1 and a real-valued output ℝ. Given a received vector y in ℝn; we define its generalized distance T to any codeword c as the sum Σ|yj|taken over all positions j, in which vectors y, c have opposite signs. We then consider the list ℒTof codewords located within distance T from the received vector y and estimate the size LTof this list using the generalized Johnson bound. For any RM code RM(s,m) of fixed order s, the algorithm is proposed that performs list decoding beyond the error-correcting radius with linear complexity in length n and retrieves the code list ℒTwith complexity of order nsLTfor any decoding radius T within the generalized Johnson bound.
In this thesis some families of linear error correcting codes are presented. The reader will find a general description of binary codes and more specific details about linear codes such as Hamming, repetition codes, Reed-Muller codes, etc. To fully immerse ourselves in the methods of coding and decoding, we will introduce examples in order to contribute to the understanding of the theories. In these times of much communication through computer technology, our daily lives involve a substantial amount of data transmission. It is essential that these data are transmitted without errors through the communication channels. Therefore, the scientific field of error-correcting codes holds a significant importance in many aspects of todays society. The main goal of this thesis is to study linear block codes which belong to the class of binary codes. In this case we will attribute a more prominent role to first order Reed-Muller codes.
Soft-decision decoding on a memoryless channel is considered for the first-order Reed-Muller codes RM (1, m) of length 2m. We assume that different positions j of the received binary vector y can be corrupted by the errors of varying weight wj. The generalized Hamming distance between vector y and any binary vector c is then defined as the sum of weighted differences wj|yj- cj| taken over all n positions. We obtain a tight upper bound LTon the number of codewords located within generalized Hamming distance T from vector y, and design a decoding algorithm that outputs this list of codewords with complexity O (n ln2LT). In particular, all possible error weights wjequal 1 if this combinatorial model is applied to a binary symmetric channel. In this case, the well known Green algorithm performs full maximum likelihood decoding of RM (1, m) and requires O (n ln2n) bit operations, whereas the Litsyn-Shekhovtsov algorithm operates within the bounded-distance decoding radius n/4-1 with linear complexity O(n). We close the performance-complexity gap between the two algorithms. Namely, for any fixed (0, ½), our algorithm outputs the complete list of codewords within the decoding radius n(½-) with linear complexity of order n ln2.
It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s=d. We thus introduce a new parameter, the stopping redundancy of Copf, defined as the minimum number of rows in a parity- check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely, s(H)=d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes
It is now well known that the performance of a linear code Copf under iterative decoding on a binary erasure channel (and other channels) is determined by the size of the smallest stopping set in the Tanner graph for Copf. Several recent papers refer to this parameter as the stopping distance s of Copf. This is somewhat of a misnomer since the size of the smallest stopping set in the Tanner graph for Copf depends on the corresponding choice of a parity-check matrix. It is easy to see that s les d, where d is the minimum Hamming distance of Copf, and we show that it is always possible to choose a parity-check matrix for Copf (with sufficiently many dependent rows) such that s = d. We thus introduce a new parameter, termed the stopping redundancy of Copf, defined as the minimum number of rows in a parity-check matrix H for Copf such that the corresponding stopping distance s(H) attains its largest possible value, namely s(H) = d. We then derive general bounds on the stopping redundancy of linear codes. We also examine several simple ways of constructing codes from other codes, and study the effect of these constructions on the stopping redundancy. Specifically, for the family of binary Reed-Muller codes (of all orders), we prove that their stopping redundancy is at most a constant times their conventional redundancy. We show that the stopping redundancies of the binary and ternary extended Golay codes are at most 34 and 22, respectively. Finally, we provide upper and lower bounds on the stopping redundancy of MDS codes