Quantum dense coding enables the transmission of two classical bits of information through the exchange of a single qubit, provided that an entangled state is shared between the communicating parties. While this protocol achieves a fundamental increase in channel capacity, its practical realization is strongly influenced by the presence of noise in realistic quantum channels. This work presents a simulation-based study of dense coding performance under two representative noise models: the depolarizing channel and the amplitude damping channel. Using Qiskit Aer, the bit error rate (BER), frame error rate (FER), and effective channel capacity are evaluated across a range of noise parameters. In addition, a classical threefold repetition strategy is examined as a lightweight error-mitigation technique. Results indicate that depolarizing noise produces more rapid degradation in both BER and channel capacity compared to amplitude damping, while repetition coding provides partial improvement in reliability at the expense of resource overhead. These findings highlight the trade-offs between efficiency and robustness in noisy implementations of dense coding and motivate further exploration of more advanced quantum error correction methods.
Quantum dense coding enables the transmission of two classical bits of information through the exchange of a single qubit, provided that an entangled state is shared between the communicating parties. While this protocol achieves a fundamental increase in channel capacity, its practical realization is strongly influenced by the presence of noise in realistic quantum channels. This work presents a simulation-based study of dense coding performance under two representative noise models: the depolarizing channel and the amplitude damping channel. Using Qiskit Aer, the bit error rate (BER), frame error rate (FER), and effective channel capacity are evaluated across a range of noise parameters. In addition, a classical threefold repetition strategy is examined as a lightweight error-mitigation technique. Results indicate that depolarizing noise produces more rapid degradation in both BER and channel capacity compared to amplitude damping, while repetition coding provides partial improvement in reliability at the expense of resource overhead. These findings highlight the trade-offs between efficiency and robustness in noisy implementations of dense coding and motivate further exploration of more advanced quantum error correction methods.
Quantum communication protocols, such as superdense coding, offer significant advantages in information transfer by leveraging quantum entanglement. However, practical implementations are hindered by the presence of noise and decoherence in quantum systems. This study investigates the effectiveness of the Steane 7-qubit error correction code in mitigating the impact of noise on the superdense coding protocol. Simulations were performed using Qiskit Aer, incorporating depolarizing, amplitude damping, and phase damping noise models at varying strengths. The error rates were evaluated across multiple trials to assess the robustness of the encoded communication. The results demonstrate that the Steane code substantially improves the fidelity of information transmission, with varying levels of protection depending on the type of noise present. These findings contribute to a better understanding of error correction strategies for reliable quantum communication in noisy environments.
Quantum dense coding could be used to transmit two classical bits with one qubit when a maximally entangled state is shared. In realistic channels, entanglement degradation reduces the channel capacity, while bit-flip noise increases decoding errors. To address these issues, we propose a novel probabilistic controlled dense coding protocol that employs the three-qubit repetition code for error correction and an auxiliary qubit for probabilistic decoding. Moreover, this proposed scheme includes a third party to supervise the communication based on a three-qubit entanglement state. The implementation steps of our protocol are presented in detail, and numerical simulations show that it achieves higher average information than dense coding without error correction. The scheme provides a robust solution for quantum communication under noisy conditions and non-maximally entangled state.
Quantum communication is at the heart of the quantum information theory. We study two types of quantum communication protocols over noisy transmission channels, i.e. super dense coding and cryptography protocols. In the first part of this thesis, for various scenarios, it is discussed how the super dense coding capacity is influenced by noisy quantum channels. The case of memoryless channels as well as those channels with memory which are modelled by uncorrelated and correlated noise, respectively, are considered. Explicitly Pauli channels over arbitrary dimensions are treated and the super dense coding capacity for some resource states is derived. For the qubit depolarizing channel, when noise is uncorrelated, the super dense coding capacity with respect to the input state is also optimized. This illustrates a threshold value of the noise parameter below which the super dense coding capacity is optimized by a maximally entangled initial state, while above the threshold value the super dense coding capacity is optimized by a product state. For Pauli channels, with correlated noise, the case of non unitary encoding is studied and the super dense coding capacity is derived. The first part of this thesis is concluded with an example for multipartite super dense coding.
In the second part of the thesis, the problem of optimal eavesdropping on noisy states in quantum key distribution is investigated. The case of the six state protocol, when the signal states are mixed with white noise, is considered. This situation may arise either when Alice deliberately adds noise to the signal states before they leave her lab, or, in a realistic scenario when the eavesdropper (referred to as Eve) is not assumed to replace the noisy quantum channel by a noiseless one. For individual attacks, we find Eve's optimal mutual information with Alice as a function of the quantum bit error rate. Finally, the results illustrate that adding noise on the quantum level can make quantum key distribution more robust against eavesdropping.
Encoding schemes and error-correcting codes are widely used in information technology to improve the reliability of data transmission over real-world communication channels. Quantum information protocols can further enhance the performance in data transmission by encoding a message in quantum states; however, most proposals to date have focused on the regime of a large number of uses of the noisy channel, which is unfeasible with current quantum technology. We experimentally demonstrate quantum enhanced communication over an amplitude damping noisy channel with only two uses of the channel per bit and a single entangling gate at the decoder. By simulating the channel using a photonic interferometric setup, we experimentally increase the reliability of transmitting a data bit by greater than 20 for a certain damping range over classically sending the message twice. We show how our methodology can be extended to larger systems by simulating the transmission of a single bit with up to eight uses of the channel and a two-bit message with three uses of the channel, predicting a quantum enhancement in all cases.
Quantum communication protocols such as superdense coding enable high-capacity information transfer using quantum entanglement. However, their performance is significantly affected by environmental noise and decoherence. This study presents an enhanced simulation framework for evaluating the Steane 7-qubit error correction code applied to superdense coding under realistic noise conditions. Building upon earlier models, the proposed work introduces robust circuit depth control mechanism and noise-aware simulation using Qiskit Aer to analyze depolarizing, amplitude damping, and phase damping errors. The system automatically encodes, decodes, and measures fidelity across varying noise probabilities, classifying results into performance tiers based on resilience. Comprehensive visualization through trend plots, heatmaps, and tier distributions offers clear insights into the impact of noise on quantum communication fidelity. The findings demonstrate that Steane encoding stabilizes fidelity within moderate noise levels, thereby improving the robustness of dense coding. This enhanced model provides a reproducible and scalable approach for studying quantum error correction, contributing to the design of noise-tolerant quantum communication networks.
Quantum computing holds immense promise for revolutionizing various fields, but its inherent susceptibility to noise poses a significant challenge to achieving reliable computations. This work investigates the degradation of quantum information due to noise and proposes an optimized approach to error-correcting codes specifically tailored for quantum systems. We establish a precise noise degradation model, incorporating various noise types and their statistical properties, represented as (σi). This model allows for a more realistic simulation of quantum noise compared to traditional approaches. Subsequently, we employ an optimization algorithm, based on the principle of minimizing bit-flip error rates, to design error-correcting codes. The core of our design strategy leverages information theory concepts, particularly channel capacity and mutual information, represented as (Cch, Imn), to determine the optimal code parameters. The optimization process aims to find the most efficient code that can effectively protect quantum information from noise, ultimately enhancing the reliability of quantum computations. The final optimized code is characterized by its encoding rate (R), decoding rate (D), and the minimum distance (dmin) of the code, represented as (R, D, dmin). The results demonstrate the effectiveness of our approach in mitigating noise degradation and improving the performance of quantum error correction.