Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Internet of Everything, Microwave Engineering, Communication and Networks (IEMECON)

Design and FPGA Implementation of an Optimized 4×4 Reversible Multiplier with Balanced Design Parameters

Mihir Lal Saha, Anamitra Roy, Anirban Das, Ahana Talukder, Agnik Maity, Antarik Sinha

Published Dec 8, 2025• 1 citation
Publisher

Abstract

Reversible logic plays a crucial role in advancing future VLSI and quantum computing, where the optimization of design parameters like quantum cost, garbage outputs, and circuit complexity is essential. This paper introduces the design and implementation of an efficient 4×4 reversible multiplier on FPGA using Peres and TSG gates. The proposed architecture results in a 31.7 % reduction in quantum cost and enhances TRLIC by up to 30.6% compared to previous designs, while also decreasing garbage outputs and constant inputs. The design has been modeled, simulated, and validated on FPGA to verify its practical viability. Findings indicate that the proposed multiplier strikes a good balance among important parameters, surpassing traditional reversible multipliers in terms of efficiency and scalability. This positions it as a promising option for incorporation into low-power VLSI circuits and quantum arithmetic systems.

DOI
10.1109/iemecon69302.2025.11365691

Related papers

Implementation of N x N Enhanced Multiplier Using Reversible Logic Gate

Saurabh Vijay Parashar, M. Vinodhini, C Paramasivam

This paper presents the design and implementation of a reversible 4×4 enhanced multiplier using quantum logic principles. The proposed architecture employs Toffoli and Peres gates to realize reversible AND gates and full adders, respectively, ensuring minimal energy dissipation in accordance with Landauer's principle. A layered structure is introduced to improve computation speed and modular scalability while maintaining reversibility. The design effectively reduces garbage outputs and constant inputs, which are critical performance parameters in reversible computing. Simulation results verify the functional correctness of the multiplier and demonstrate its potential for application in quantum computing, low-power VLSI design, and nanotechnology-based systems. The modular nature of the architecture also supports scalability for higher-order multipliers with minimal design overhead.

International Conference on Communication, Computing and Electronics Systems (ICCCES)•Jan 21, 2026•0 citations

Design and Implementation of an Efficient Quantum Cost Optimized Adder Using Reversible Logic Gates

Shatavisha Dasgupta, Sourav Pandey, Debjit Roy +3 more

In modern Very-Large-Scale Integration (VLSI) technology, managing information loss is a critical challenge. Conventional logic gates, such as AND, OR, and NOT, are prone to data loss during operations, reducing their efficiency for sophisticated applications. Reversible logic gates, which have an equal number of inputs and outputs, offer a solution by preserving data integrity. This paper presents the design and FPGA implementation of an efficient and high-speed full adder circuit utilizing reversible logic gates, namely Feynman, Toffoli, and Peres gates. The design focuses on improving computational efficiency and thermal performance. An analysis of the circuit's quantum cost, garbage outputs, and ancillary inputs reveals its advantages over traditional designs. Proposed design has been realized using Verilog and Synthesize and simulations performed using Xilinx Vivado and Xilinx ISE tools, confirms the functionality and efficiency of the proposed full adder. FPGA implementation of the design has been done using NEXYS A7 (Artix 7 series). The results show that the circuit has a quantum cost of 10, with two garbage outputs and one ancillary input, underscoring its potential for use in low-power, high-performance computing systems and quantum computing applications.

International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech)•Jan 31, 2025•4 citations

A Cost Effective Design of Reversible Single Precision Floating Point Multiplier

Malathi S.R, Akshaya Venugopal, Pavithra Sarathy

Abstract—The emerging computing technologies like quantum computing, optical computing, low power computing etc. make use of reversible logic. Also applications like image processing and signal processing make use of floating point (FP) multiplications as the major operations. In this paper we propose the design of a low power, cost effective reversible floating point multiplier for such applications. The proposed design is comparable with the reversible FP multipliers discussed in the literature so far. The proposed design using TSG gates is cost effective in terms of the number of quantum gates and the garbage outputs compared to the existing ones. Since it has been proved that the ‘4 x 4 ’ TSG gate [4] can work singly as a reversible full adder with only two garbage outputs, it is an optimal reversible full adder with universal functionalities. Hence the proposed design yields an optimal floating point multiplier in terms of quantum cost and garbage outputs. The proposed design has three stages- partial product generation, compression using 4:2 TSG compressors and the final stage which consists of TSG adders to generate the resultant product. The proposed design of 32 x 32 bit FP multiplier is illustrated using TSG gates which show that the number of garbage outputs in each 8X8 multiplier is reduced significantly. Keywords—Reversible floating point multiplier, Reversible circuit design, Quantum computation. I.

•Jan 31, 2013•2 citations

OPTIMIZED REVERSIBLE MULTIPLIER CIRCUIT

Majid Haghparast, MAJID MOHAMMADI, Keivan Navi +1 more

Reversible logic circuits have received significant attention in quantum computing, low power CMOS design, optical information processing, DNA computing, bioinformatics, and nanotechnology. This paper presents two new 4 × 4 bit reversible multiplier designs which have lower hardware complexity, less garbage bits, less quantum cost and less constant inputs than previous ones, and can be generalized to construct efficient reversible n × n bit multipliers. An implementation of reversible HNG is also presented. This implementation shows that the full adder design using HNG is one of the best designs in term of quantum cost. An implementation of MKG is also presented in order to have a fair comparison between our proposed reversible multiplier designs and the existing counterparts. The proposed reversible multipliers are optimized in terms of quantum cost, number of constant inputs, number of garbage outputs and hardware complexity. They can be used to construct more complex systems in nanotechnology.

Journal of Circuits Systems and Computers•Apr 1, 2009•100 citations

Reversible multipliers: Decreasing the depth of the circuit

Fateme Naderpour, Abbas Vafaei

There are many arithmetic operations which are performed, on a computer arithmetic unit, through the use of multipliers (e.g., exponential and trigonometric functions). Consequently, optimized multipliers are on demand while designing an arithmetic unit. On the other hand, given the advent of quantum computer and reversible logic, design and implementation of digital circuits in this logic has gained popularity. In reversible circuit design, decreasing three parameters is of interest: quantum cost, depth of the circuit and the number of garbage outputs. In this paper, we propose a novel reversible multiplier with the aim of decreasing the depth of the circuit while neither scarifying any extra quantum cost nor garbage outputs. The partial products, as is the case for prior works, are generated in parallel using Peres gates and thereafter a reversible multi-operand adder consisting of reversible full-adders and half-adders produces the final product.

International Conference on Electrical and Computer Engineering (ICECE)•Jan 1, 2008•19 citations

A Novel and Ultra-Efficient Design of Reversible Quantum Vedic Multiplier

Mojtaba Noorallahzadeh, Mohammad Mosleh

Abstract Quantum computing has attracted increased attention in recent years owing to substantial advancements in quantum algorithms and system architecture. Quantum algorithms are implemented using quantum circuits. These circuits include an intrinsic reversibility and often have a substantial Boolean component that requires synthesis. A crucial characteristic of reversible circuits is the preservation of parity. Parity-preserving logic is a category that maintains the parity of both inputs and outputs, facilitating the detection of permanent and transient errors. Multiplier circuits are essential components in digital computing systems, playing a crucial role in the development of various hardware, including arithmetic circuits. This paper first introduces a novel block based on a transformationbased synthesis technique from the elementary quantum gates. Then it proposes a distinctive 2×2 parity-preserving reversible quantum Vedic multiplier based on the recommended block and prior gates. In addition, further designs of Vedic multipliers are provided, encompassing 4-bit, 8-bit, and 16-bit configurations. We illustrate that our design brings superior outcomes regarding quantum cost (QC), constant inputs (CI) count, CNOT-V/V + count, garbage outputs (GO) count, and gate count (GC) in comparison to earlier designs. This study achieves an average decrease of 23.09%, 37.51%, 37.51%, 54.89%, and 19.38% in QC, CI, GO, GC, and CNOT-V/V + count, respectively. Furthermore, all suggested circuits undergo appraisal and validation within the IBM quantum laboratory.

Quantum Information and Computation•Dec 1, 2025•0 citations
Reversible logic plays a crucial role in advancing future VLSI and quantum computing, where the optimization of design parameters like quantum cost, garbage outputs, and circuit complexity is essential. This paper introduces the design and implementation of an efficient 4×4 reversible multiplier on FPGA using Peres and TSG gates. The proposed architecture results in a 31.7 % reduction in quantum cost and enhances TRLIC by up to 30.6% compared to previous designs, while also decreasing garbage outputs and constant inputs. The design has been modeled, simulated, and validated on FPGA to verify its practical viability. Findings indicate that the proposed multiplier strikes a good balance among important parameters, surpassing traditional reversible multipliers in terms of efficiency and scalability. This positions it as a promising option for incorporation into low-power VLSI circuits and quantum arithmetic systems.
This paper presents the design and implementation of a reversible 4×4 enhanced multiplier using quantum logic principles. The proposed architecture employs Toffoli and Peres gates to realize reversible AND gates and full adders, respectively, ensuring minimal energy dissipation in accordance with Landauer's principle. A layered structure is introduced to improve computation speed and modular scalability while maintaining reversibility. The design effectively reduces garbage outputs and constant inputs, which are critical performance parameters in reversible computing. Simulation results verify the functional correctness of the multiplier and demonstrate its potential for application in quantum computing, low-power VLSI design, and nanotechnology-based systems. The modular nature of the architecture also supports scalability for higher-order multipliers with minimal design overhead.
In modern Very-Large-Scale Integration (VLSI) technology, managing information loss is a critical challenge. Conventional logic gates, such as AND, OR, and NOT, are prone to data loss during operations, reducing their efficiency for sophisticated applications. Reversible logic gates, which have an equal number of inputs and outputs, offer a solution by preserving data integrity. This paper presents the design and FPGA implementation of an efficient and high-speed full adder circuit utilizing reversible logic gates, namely Feynman, Toffoli, and Peres gates. The design focuses on improving computational efficiency and thermal performance. An analysis of the circuit's quantum cost, garbage outputs, and ancillary inputs reveals its advantages over traditional designs. Proposed design has been realized using Verilog and Synthesize and simulations performed using Xilinx Vivado and Xilinx ISE tools, confirms the functionality and efficiency of the proposed full adder. FPGA implementation of the design has been done using NEXYS A7 (Artix 7 series). The results show that the circuit has a quantum cost of 10, with two garbage outputs and one ancillary input, underscoring its potential for use in low-power, high-performance computing systems and quantum computing applications.
Abstract—The emerging computing technologies like quantum computing, optical computing, low power computing etc. make use of reversible logic. Also applications like image processing and signal processing make use of floating point (FP) multiplications as the major operations. In this paper we propose the design of a low power, cost effective reversible floating point multiplier for such applications. The proposed design is comparable with the reversible FP multipliers discussed in the literature so far. The proposed design using TSG gates is cost effective in terms of the number of quantum gates and the garbage outputs compared to the existing ones. Since it has been proved that the ‘4 x 4 ’ TSG gate [4] can work singly as a reversible full adder with only two garbage outputs, it is an optimal reversible full adder with universal functionalities. Hence the proposed design yields an optimal floating point multiplier in terms of quantum cost and garbage outputs. The proposed design has three stages- partial product generation, compression using 4:2 TSG compressors and the final stage which consists of TSG adders to generate the resultant product. The proposed design of 32 x 32 bit FP multiplier is illustrated using TSG gates which show that the number of garbage outputs in each 8X8 multiplier is reduced significantly. Keywords—Reversible floating point multiplier, Reversible circuit design, Quantum computation. I.
Reversible logic circuits have received significant attention in quantum computing, low power CMOS design, optical information processing, DNA computing, bioinformatics, and nanotechnology. This paper presents two new 4 × 4 bit reversible multiplier designs which have lower hardware complexity, less garbage bits, less quantum cost and less constant inputs than previous ones, and can be generalized to construct efficient reversible n × n bit multipliers. An implementation of reversible HNG is also presented. This implementation shows that the full adder design using HNG is one of the best designs in term of quantum cost. An implementation of MKG is also presented in order to have a fair comparison between our proposed reversible multiplier designs and the existing counterparts. The proposed reversible multipliers are optimized in terms of quantum cost, number of constant inputs, number of garbage outputs and hardware complexity. They can be used to construct more complex systems in nanotechnology.
There are many arithmetic operations which are performed, on a computer arithmetic unit, through the use of multipliers (e.g., exponential and trigonometric functions). Consequently, optimized multipliers are on demand while designing an arithmetic unit. On the other hand, given the advent of quantum computer and reversible logic, design and implementation of digital circuits in this logic has gained popularity. In reversible circuit design, decreasing three parameters is of interest: quantum cost, depth of the circuit and the number of garbage outputs. In this paper, we propose a novel reversible multiplier with the aim of decreasing the depth of the circuit while neither scarifying any extra quantum cost nor garbage outputs. The partial products, as is the case for prior works, are generated in parallel using Peres gates and thereafter a reversible multi-operand adder consisting of reversible full-adders and half-adders produces the final product.
Abstract Quantum computing has attracted increased attention in recent years owing to substantial advancements in quantum algorithms and system architecture. Quantum algorithms are implemented using quantum circuits. These circuits include an intrinsic reversibility and often have a substantial Boolean component that requires synthesis. A crucial characteristic of reversible circuits is the preservation of parity. Parity-preserving logic is a category that maintains the parity of both inputs and outputs, facilitating the detection of permanent and transient errors. Multiplier circuits are essential components in digital computing systems, playing a crucial role in the development of various hardware, including arithmetic circuits. This paper first introduces a novel block based on a transformationbased synthesis technique from the elementary quantum gates. Then it proposes a distinctive 2×2 parity-preserving reversible quantum Vedic multiplier based on the recommended block and prior gates. In addition, further designs of Vedic multipliers are provided, encompassing 4-bit, 8-bit, and 16-bit configurations. We illustrate that our design brings superior outcomes regarding quantum cost (QC), constant inputs (CI) count, CNOT-V/V + count, garbage outputs (GO) count, and gate count (GC) in comparison to earlier designs. This study achieves an average decrease of 23.09%, 37.51%, 37.51%, 54.89%, and 19.38% in QC, CI, GO, GC, and CNOT-V/V + count, respectively. Furthermore, all suggested circuits undergo appraisal and validation within the IBM quantum laboratory.