Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Radio-Frequency Integration Technology (RFIT)

An Introduction to Superconducting Quantum Computer for Microwave Engineers

H. Shiomi

Published Aug 25, 2025• 0 citations
Publisher

Abstract

This paper introduces superconducting computers. from the perspective of microwave engineering. It provides a system-level overview of cryo-genic quantum hardware and explains how microwave pulses are used to control and read out quantum bits (qubits). Key concepts such as superposition, Bloch sphere representation, and the role of resonators are discussed. The paper also outlines the design of a scalable control system developed at QIQB, Osaka University, including its architecture and synchronization performance. Finally, challenges and future directions toward fault-tolerant quantum computing, including quantum error correction and cryogenic signal multiplexing, are .addressed.

DOI
10.1109/rfit65667.2025.11364614

Related papers

A Survey of Microwave-Implemented Superconducting Qubit Control and Readout Circuits

Syed Naheel Raza Rizvi, Meraj Ahmad, Arslan Shafique +4 more

Superconducting qubits are pivotal in advancing quantum computing, poised for scale but limited by the complexity and fidelity of their control and readout systems, relying on RF and signal processing infrastructure. This survey serves as a comprehensive and technically grounded review of control and readout architectures tailored for superconducting qubits. Synthesizing insights from device physics, circuit design, microwave engineering, signal processing, and cryogenic integration, this work details the practicalities of RF pulse generation, signal synthesis, and readout signal analysis for quantum systems. it covers key requirements, parameters, and pulse engineering techniques, including commonly used envelopes like Gaussian and DRAG designs. Moving to the system level, this survey systematically classifies and critically analyses current architectural strategies (covering key areas like frequency conversion, waveform management, and system infrastructure) and technology platforms (including adaptive classical control stacks, cryogenic CMOS circuits, and novel interconnects and interfaces), evaluating their trade-offs in performance. Extensive literature analysis identifies prevailing limitations such as wiring complexity, thermal budget constraints, latency, and power consumption, while highlighting underexplored opportunities for on-chip signal processing and novel interconnects, drawing analogies to advanced communication systems design. By consolidating diverse control paradigms and critically evaluating their trade-offs, this survey provides a unified foundation for designing next-generation quantum control stacks. Finally, a forward-looking roadmap outlines key trends in monolithic integration, cryo-compatible digital architectures, and physics-informed hardware co-design, offering both a retrospective synthesis and a prospective vision for quantum hardware engineering beyond the NISQ era.

IEEE Transactions on Quantum Engineering•Jan 1, 2026•2 citations

Superconducting Qubits: An Evaluation of Architectures, Noise Sources, and Quantum Error Correction Strategies

Modou Njie

Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.

•Mar 12, 2026•0 citations

Quantum Control Architecture and Circuit Blocks for Solid-State Microwave Qubits

Fatemeh Nikbakhtnasrabadi, Martin P. Weides

Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.

•Feb 11, 2025•2 citations

Quantum hardware and technology

Pawan Kumar Verma, Mohit Kumar, Saurabh Singhal +1 more

Quantum computing is a revolutionary paradigm that leverages superposition, entanglement, and interference to execute computations impossible for a classical computer. Quantum hardware implements the base units of quantum information called qubits, which are the basis for this technology. Unlike classical bits, each qubit exists in multiple states simultaneously, offering an exponential increase in computational power. This chapter explores the landscape and evolution of quantum hardware technologies—including superconducting qubits, trapped ions, topological qubits, semiconductor-based qubits, photonic systems, and quantum annealers—all unique in the physical realization of qubits with varying advantages regarding coherence time, error tolerance, scalability, and manufacturability. In spite of huge progress, there are enormous challenges to be met in quantum hardware development: long coherence times need to be maintained, gate errors minimized, cryogenic temperatures maintained, and large numbers of qubits integrated into one system. This chapter is therefore devoted to comparing the main quantum hardware architectures, underlying principles, technological implementations, and related engineering challenges. It also emphasizes the current industrial practices, such as the reliance of IBM and Google on superconducting qubits and of D-Wave on quantum annealing, while illustrating the manner in which new materials and control systems are setting the standards for the next generation of quantum devices. It discusses state-of-the-art developments in qubit design, cryogenic control, and error correction mechanisms in the concluding sections, providing insight into scalability trends and future directions of quantum computing hardware. The analysis concludes that although a number of architectures hold great promise, it would take sustained innovation spanning the fields of physics, materials science, and engineering to develop fault-tolerant, scalable, commercially viable quantum systems.

CRC Press eBooks•Nov 6, 2026•0 citations

Quantum Computing with Superconducting Qubits and Cavities: Concepts and Technology

Hasan Padamsee, Tanay Roy, Alexander Romanenko +1 more

Build quantum computers using superconducting qubits and microwave cavity technology Creating qubits with sufficiently long coherence times remains one of the central challenges in building practical quantum computers. Quantum Computing with Superconducting Qubits and Cavities unites the latest advances in superconducting qubits, ultra-high-Q microwave cavities, and cavity–transmon architectures that are emerging as one of the leading platforms for scalable, fault-tolerant quantum computing. By combining conceptual insight with practical implementation, the book equips readers to understand not only how these systems work, but why they are at the forefront of the quantum technology revolution. The book explores quantum computation using bosonic modes, Fock states, qudits, quantum memories, and modern bosonic error-correcting codes including cat, binomial, and GKP encodings. Fundamental concepts are developed through clear physical explanations, while rigorous mathematical treatments are introduced where needed to provide a deeper understanding. Dedicated reviews of the underlying principles of quantum physics make the material accessible to newcomers without sacrificing the depth expected by researchers and practicing engineers. Quantum Computing with Superconducting Qubits and Cavities also includes: Design principles and operation of superconducting transmon qubits integrated with high-coherence microwave cavities for scalable quantum architectures. Bosonic quantum error-correction strategies that dramatically extend coherence and move quantum computing closer to fault-tolerant operation. Applications of quantum computing, including integer factoring, database searching, quantum chemistry, condensed-matter physics, and materials science simulations beyond the reach of classical computers. Materials science, fabrication methods, and surface treatments that continue to drive record improvements in qubit and cavity coherence. The global race toward quantum computing, including major international investments and the rapidly expanding role of superconducting quantum technologies. Written for physicists, materials scientists, electrical engineers, computer scientists, graduate students, and researchers entering quantum information science, this book provides both the theoretical foundation and the practical knowledge needed to engage with one of the fastest-growing fields in modern science and engineering.

Wiley eBooks•Sep 3, 2026•0 citations

Qubit Design for a Superconducting Quantum Computer

David Wohlgemuth

The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.

The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research•Dec 19, 2018•0 citations
This paper introduces superconducting computers. from the perspective of microwave engineering. It provides a system-level overview of cryo-genic quantum hardware and explains how microwave pulses are used to control and read out quantum bits (qubits). Key concepts such as superposition, Bloch sphere representation, and the role of resonators are discussed. The paper also outlines the design of a scalable control system developed at QIQB, Osaka University, including its architecture and synchronization performance. Finally, challenges and future directions toward fault-tolerant quantum computing, including quantum error correction and cryogenic signal multiplexing, are .addressed.
Superconducting qubits are pivotal in advancing quantum computing, poised for scale but limited by the complexity and fidelity of their control and readout systems, relying on RF and signal processing infrastructure. This survey serves as a comprehensive and technically grounded review of control and readout architectures tailored for superconducting qubits. Synthesizing insights from device physics, circuit design, microwave engineering, signal processing, and cryogenic integration, this work details the practicalities of RF pulse generation, signal synthesis, and readout signal analysis for quantum systems. it covers key requirements, parameters, and pulse engineering techniques, including commonly used envelopes like Gaussian and DRAG designs. Moving to the system level, this survey systematically classifies and critically analyses current architectural strategies (covering key areas like frequency conversion, waveform management, and system infrastructure) and technology platforms (including adaptive classical control stacks, cryogenic CMOS circuits, and novel interconnects and interfaces), evaluating their trade-offs in performance. Extensive literature analysis identifies prevailing limitations such as wiring complexity, thermal budget constraints, latency, and power consumption, while highlighting underexplored opportunities for on-chip signal processing and novel interconnects, drawing analogies to advanced communication systems design. By consolidating diverse control paradigms and critically evaluating their trade-offs, this survey provides a unified foundation for designing next-generation quantum control stacks. Finally, a forward-looking roadmap outlines key trends in monolithic integration, cryo-compatible digital architectures, and physics-informed hardware co-design, offering both a retrospective synthesis and a prospective vision for quantum hardware engineering beyond the NISQ era.
Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.
Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.
Quantum computing is a revolutionary paradigm that leverages superposition, entanglement, and interference to execute computations impossible for a classical computer. Quantum hardware implements the base units of quantum information called qubits, which are the basis for this technology. Unlike classical bits, each qubit exists in multiple states simultaneously, offering an exponential increase in computational power. This chapter explores the landscape and evolution of quantum hardware technologies—including superconducting qubits, trapped ions, topological qubits, semiconductor-based qubits, photonic systems, and quantum annealers—all unique in the physical realization of qubits with varying advantages regarding coherence time, error tolerance, scalability, and manufacturability. In spite of huge progress, there are enormous challenges to be met in quantum hardware development: long coherence times need to be maintained, gate errors minimized, cryogenic temperatures maintained, and large numbers of qubits integrated into one system. This chapter is therefore devoted to comparing the main quantum hardware architectures, underlying principles, technological implementations, and related engineering challenges. It also emphasizes the current industrial practices, such as the reliance of IBM and Google on superconducting qubits and of D-Wave on quantum annealing, while illustrating the manner in which new materials and control systems are setting the standards for the next generation of quantum devices. It discusses state-of-the-art developments in qubit design, cryogenic control, and error correction mechanisms in the concluding sections, providing insight into scalability trends and future directions of quantum computing hardware. The analysis concludes that although a number of architectures hold great promise, it would take sustained innovation spanning the fields of physics, materials science, and engineering to develop fault-tolerant, scalable, commercially viable quantum systems.
Build quantum computers using superconducting qubits and microwave cavity technology Creating qubits with sufficiently long coherence times remains one of the central challenges in building practical quantum computers. Quantum Computing with Superconducting Qubits and Cavities unites the latest advances in superconducting qubits, ultra-high-Q microwave cavities, and cavity–transmon architectures that are emerging as one of the leading platforms for scalable, fault-tolerant quantum computing. By combining conceptual insight with practical implementation, the book equips readers to understand not only how these systems work, but why they are at the forefront of the quantum technology revolution. The book explores quantum computation using bosonic modes, Fock states, qudits, quantum memories, and modern bosonic error-correcting codes including cat, binomial, and GKP encodings. Fundamental concepts are developed through clear physical explanations, while rigorous mathematical treatments are introduced where needed to provide a deeper understanding. Dedicated reviews of the underlying principles of quantum physics make the material accessible to newcomers without sacrificing the depth expected by researchers and practicing engineers. Quantum Computing with Superconducting Qubits and Cavities also includes: Design principles and operation of superconducting transmon qubits integrated with high-coherence microwave cavities for scalable quantum architectures. Bosonic quantum error-correction strategies that dramatically extend coherence and move quantum computing closer to fault-tolerant operation. Applications of quantum computing, including integer factoring, database searching, quantum chemistry, condensed-matter physics, and materials science simulations beyond the reach of classical computers. Materials science, fabrication methods, and surface treatments that continue to drive record improvements in qubit and cavity coherence. The global race toward quantum computing, including major international investments and the rapidly expanding role of superconducting quantum technologies. Written for physicists, materials scientists, electrical engineers, computer scientists, graduate students, and researchers entering quantum information science, this book provides both the theoretical foundation and the practical knowledge needed to engage with one of the fastest-growing fields in modern science and engineering.
The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.