Jamming antenna selection (JAS) serves as a low-complexity approach to enhance covert communication in Internet of Things (IoT) networks subject to stringent energy and computational limitations. Unlike conventional JAS strategies that assume a fully cooperative jammer selecting a single antenna for artificial noise transmission, this work investigates the optimal number of selected jamming antennas to maximize covert performance with a limited-cooperation jammer. In the considered scenario, the jammer does not provide the necessary cooperation, which prevents the legitimate receiver from acquiring the jammer–receiver channel state information (CSI). According to the degree of CSI availability at the jammer, two practical JAS schemes, random JAS (RJAS) and minimum JAS (MJAS), are investigated to effectively impair the warden’s detection performance. Closed-form expressions are derived for the warden’s expected minimum detection error probability and the legitimate receiver’s transmission outage probability, with the latter evaluated under interference-limited conditions. Leveraging these results, an optimization framework is developed to jointly determine the transmit power, transmission rate, and number of selected jamming antennas to maximize the effective covert rate. Numerical results illustrate that the effective covert rate under the RJAS strategy increases monotonically with the number of selected antennas, whereas the effective covert rate under the MJAS strategy is maximized when selecting two antennas. Both theoretical analysis and simulation results validate the effectiveness of the proposed schemes and highlight the significant covert performance gains achieved by employing multiple jamming antennas in IoT networks with limited cooperation.
Jamming antenna selection (JAS) serves as a low-complexity approach to enhance covert communication in Internet of Things (IoT) networks subject to stringent energy and computational limitations. Unlike conventional JAS strategies that assume a fully cooperative jammer selecting a single antenna for artificial noise transmission, this work investigates the optimal number of selected jamming antennas to maximize covert performance with a limited-cooperation jammer. In the considered scenario, the jammer does not provide the necessary cooperation, which prevents the legitimate receiver from acquiring the jammer–receiver channel state information (CSI). According to the degree of CSI availability at the jammer, two practical JAS schemes, random JAS (RJAS) and minimum JAS (MJAS), are investigated to effectively impair the warden’s detection performance. Closed-form expressions are derived for the warden’s expected minimum detection error probability and the legitimate receiver’s transmission outage probability, with the latter evaluated under interference-limited conditions. Leveraging these results, an optimization framework is developed to jointly determine the transmit power, transmission rate, and number of selected jamming antennas to maximize the effective covert rate. Numerical results illustrate that the effective covert rate under the RJAS strategy increases monotonically with the number of selected antennas, whereas the effective covert rate under the MJAS strategy is maximized when selecting two antennas. Both theoretical analysis and simulation results validate the effectiveness of the proposed schemes and highlight the significant covert performance gains achieved by employing multiple jamming antennas in IoT networks with limited cooperation.
In this paper, we investigate covert communications in data collected IoT with NOMA, where the paired sensor nodes Smand Sntransmit covert messages to a legitimate receiver (Bob) in the presence of a Warden (Willie). To confuse the detection at Willie, an extra multi-antenna friendly jammer (Jammer) has been employed to transmit artificial noise (AN) with random power. Based on the CSI of Willie is available or not at Jammer, three AN transmission schemes, including null-space artificial noise (NAN), transmit antenna selection (TAS), and zero-forcing beamforming (ZFB), are proposed. Furthermore, the closed-form expressions of expected minimum detection error probability (EMDEP) and joint connection outage probability (JCOP) are derived to measure covertness and reliability, respectively. Finally, the maximum effective covert rate (ECR) is obtained with a given covertness constraint. The numerical results show that ZFB scheme has the best maximum ECR in the case of the number of antennas satisfies N > 2, and the same maximum ECR can be achieved in ZFB and NAN schemes with N =3D 2. Moreover, TAS scheme also can improve the maximum ECR compared with the benchmark scheme (i.e., signal-antenna jammer). In addition, a proper NOMA node pairing can further improve the maximum ECR.
This article investigates covert communications in a multirelay Internet of Things (IoT) system with multiple energy harvesting jammers, where a transmitter (Alice) attempts to covertly transmit confidential messages to its destination (Bob) through relay forwarding, while a warden (Willie) detects the existence of Alice’s transmission. Specifically, we employ a harvesting-then-jamming protocol with which the jammers first harvest energy from Alice and then send jamming signals to interfere with Willie’s detection. We propose a relay and jammer selection strategy, namely quality of service (QoS)-aware selection, and use the random selection strategy as a comparison strategy. Under these two selection strategies, we derive the optimal detection threshold and minimum detection error probability at Willie, respectively. We then model the covert throughput performance and obtain the maximum covert throughput by jointly optimizing covert transmit power and jamming transmit power. Extensive numerical results are provided to illustrate the impacts of system parameters on covert throughput performance.
Covert communications can hide confidential signals in environmental noise to avoid being detected and provide comprehensive security for wireless transmissions. However, there still exist significant risks in wireless transmission once being detected. In this letter, we propose a more secure covert scheme, where a multiple antennas transmitter, assisted by a multi-antenna UAV jammer, maximizes the covert secrecy rate under the scenarios of both correct and incorrect detection by a warden with both error detection probability and eavesdropping rate limitations satisfied. The transmitter and jammer adopt maximum ratio transmission (MRT) and zero-forcing, respectively, to maximize the transmission rate and minimize the interference at the legitimate receiver. First, we analyze the monotonicity of error detection probability to determine the optimal power detection threshold and the corresponding smallest error detection probability. Then, under this worst case, we jointly optimize the transmit and jamming power to maximize the covert secrecy rate while guaranteeing the covert and eavesdropping limits meet their requirements, respectively. Finally, simulation results are presented to prove the correctness of the theoretical conclusion and evaluate the effectiveness of our proposed scheme.
Existing studies on physical layer security (PLS) for uplink communications often assume a pseudo-random sequence (PRS)-based cooperative jamming, which enables the base station (BS) to perfectly cancel the jamming signal. However, the assumption of the pre-shared PRS leads to practical challenges, e.g., the key sharing problem, especially in Internet of Things (IoT) systems. To resolve the issues, this work proposes a novel PLS scheme utilizing the unique feature of fluid antenna (FA) systems, i.e., full exploitation of spatial degrees of freedom (DoFs). In particular, for uplink IoT systems, we introduce an FA-aided cooperative jamming scheme in which all single FA devices except for a legitimate device play the role of jammers to protect the communication of the legitimate parties. To this end, we propose an FA port selection strategy to maximize the received signal-to-interference-plus-noise ratio (SINR) of the legitimate parties and derive analytic expressions of the outage probability (OP) and the secrecy outage probability (SOP). In addition, in the interference-limited scenario, we develop more insightful closed-form expressions of OP and SOP, which allow one to capture important behaviors of the designed system. Then, we formulate an optimization problem that aims to maximize secrecy throughput by jointly optimizing the jamming power, transmission rate, and secrecy rate. To tackle the non-convexity of the problem, we develop a technique in which the minorization-maximization and the alternating optimization techniques are judiciously combined. Performance evaluations demonstrate that the proposed scheme can outperform the PRS-based scheme in practical IoT scenarios.
This paper adopts the antenna selection technique to enhance the covert rate in a wireless communication network comprised of a source, a destination , an external jammer and an eavesdropper. In the covert communication, the level of transmit power is low and hence a source with multiple antennas can be adopted to send the information toward the single antenna destination while concurrently, the jammer transmits an artificial noise signal. For this system model, we consider a scenario where the source is forced to select one or several of its antennas to transmit its confidential information due to its limited RF chains. Furthermore, we consider two different jamming scenarios to support our covert communication: 1) The destination is unable to cancel the jamming signal, 2) The destination can subtract the jamming signal. For such a communication network, our aim is to maximize the covert rate subject to power constraint and covert communication requirement. In the first scenario, the optimization problem is non-convex, and hence, it can be solved through using Difference of Convex function (DC) method while the optimization problem of the second scenario is intrinsically convex. Our numerical results show that the higher the number of selected antennas at the transmitter, the higher the covert rate will be achieved.
In this work, we exploit a multi-antenna cooperative jammer to enable secure short packet communications in Internet of Things (IoT) networks. Specifically, we propose three jamming schemes to combat eavesdropping, i.e., the zero forcing beamforming (ZFB) scheme, null-space artificial noise (NAN) scheme, and transmit antenna selection (TAS) scheme. Assuming Rayleigh fading, we derive new closed-form approximations for the secrecy throughput with finite blocklength coding. To gain further insights, we also analyze the asymptotic performance of the secrecy throughput in the case of infinite blocklength. Furthermore, we investigate the optimization problem in terms of maximizing the secrecy throughput with the latency and reliability constraints to determine the optimal blocklength. Simulation results validate the accuracy of the approximations and evaluate the impact of key parameters such as the jamming power and the number of antennas at the jammer on the secrecy throughput.