Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Physical Society Conference on High Energy Physics (EPS-HEP)

Scalable Readout Architecture for Large-Scale Quantum Sensor Arrays in Fundamental Physics

Luis Eduardo Ardila-Perez, Daniel Crovo, Luciano Ferreyro, Marvin Fuchs, Manuel Elías García Redondo, R. Gartmann, Matías Rolf Hampel, Timo Muscheid, M. Platino, Oliver Sander, Lukas Scheller, Mario Schlösser, Frank Simon

Published Jan 29, 2026• 0 citations
Publisher

Abstract

Modern experiments in particle physics, astroparticle physics, and cosmology increasingly rely on large cryogenic sensor arrays to achieve the sensitivity needed to probe phenomena beyond the Standard Model, including the neutrino-mass scale, dark-matter interactions, neutrinoless double-beta decay, and B-mode polarization of the cosmic microwave background. These efforts require the simultaneous readout of tens to hundreds of thousands of detectors, pushing current data-acquisition technologies and motivating the use of frequency-division multiplexing, particularly microwave SQUID multiplexing (𝜇MUX), to scale to such array sizes. In this work we present the Quantum Interface Controller (QIC), a modular software-defined radio platform for high-fidelity, scalable readout of cryogenic detectors and superconducting qubits. Based on Xilinx Zynq UltraScale+ MPSoC and RFSoC technology, the QIC integrates multi-gigahertz DACs/ADCs, FPGA-based real-time processing, and a unified software stack, supporting both DirectRF generation and super-heterodyne sampling to synthesize and demodulate thousands of microwave tones per unit. A firmware-integrated Cryogenic Detector Emulator (CryoDE) provides a digital detector twin for hardware-in-the-loop validation. This paper presents the QIC architecture, firmware and software environment, it is currently being utilized in the ECHo neutrino-mass experiment, the BULLKID-DM dark-matter search, and for superconducting-qubit readout in quantum-computing applications, demonstrating its suitability as a scalable platform for next-generation quantum-sensor arrays.

DOI
10.22323/1.485.0641

Related papers

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

•Sep 27, 2025•0 citations

FIREQ: FPGA Instrumentation for Readout and Qubit control

Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico +8 more

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

quant-pharXiv:2608.29399•Sep 1, 2026•0 citations

ICARUS-Q: Integrated control and readout unit for scalable quantum processors

Kun Hee Park, Yung Szen Yap, Yuanzheng Paul Tan +8 more

We present a control and measurement setup for superconducting qubits based on the Xilinx 16-channel radio-frequency system-on-chip (RFSoC) device. The proposed setup consists of four parts: multiple RFSoC boards, a setup to synchronize every digital to analog converter (DAC) and analog to digital converter (ADC) channel across multiple boards, a low-noise direct current supply for tuning the qubit frequency, and cloud access for remotely performing experiments. We also designed the setup to be free of physical mixers. The RFSoC boards directly generate microwave pulses using sixteen DAC channels up to the third Nyquist zone, which are directly sampled by its eight ADC channels between the fifth and the ninth zones.

arXiv:2112.02933•Review of Scientific Instruments•Oct 1, 2022•33 citations

Prototype of the room-temperature readout system for microwave multiplexing readout of transition edge sensor

Yuanda Wang, Cao Ping, Weigang Yin +8 more

Transition Edge Sensors (TESs) are highly sensitive cryogenic detectors widely used in astronomy, high-energy physics and nuclear radiation detection. As TES is increasingly deployed in large-scale arrays to improve sensitivity and effective collecting area, multiplexed readout becomes essential for reducing system complexity. Microwave SQUID multiplexing (μMUX) technology combining superconducting resonators with radio-frequency superconducting quantum interference devices (RF-SQUIDs), represents a state-of-the-art solution. In this work, a room-temperature readout prototype for TES μMUX readout was designed. The system features a scalable two-stage architecture, including a highly integrated, chassis-independent front-end signal processing module and back-end event-reconstruction module. A high-frequency-resolution frequency-comb signal generation method with real-time, per-tone frequency and phase tunability was developed. In addition, optimization of the firmware implementation effectively overcomes the computational-resource bottleneck of the Field Programmable Gate Array (FPGA). The prototype supports autonomous frequency sweeping, parameter diagnostics, and online event reconstruction. Self-test shows S 21 phase noise better than −110 dBc/Hz at −30 dBm, remaining stable with increasing channel count. Joint tests with a μMUX cryogenic system successfully captured the RF-SQUID response and achieved an equivalent noise current of 44 pA/√Hz referred to the TES, validating the prototype as a practical solution of the room-temperature system for TES μMUX readout.

Nuclear Engineering and Technology•Oct 30, 2026•0 citations

Scalable Architecture for Dark Photon Searches: Superconducting-Qubit Proof of Principle

Runqi Kang, Q. P. Hu, Xiao Cai +4 more

The dark photon is a well-motivated dark matter candidate that appears in many extensions of the standard model. A fundamental mass-range-sensitivity dilemma is always haunting the dark photon search experiments: resonant haloscopes have excellent sensitivity but are narrowband, while nonresonant haloscopes are broadband but not as sensitive as the resonant ones. A scalable architecture integrating numerous resonant haloscopes would be a desirable solution to this dilemma. However, even the concept of a scalable search remains rarely explored due to the size limitation of conventional haloscopes imposed by the dark photon wavelength. Here, we propose and demonstrate a novel architecture using superconducting qubits as subwavelength haloscope units. By virtue of the scalability of superconducting qubits, it is possible to integrate multiple qubits with different frequencies on a chip-scale device. Furthermore, the frequencies of the qubits can be tuned to extend the search mass range. Thus, our scalable architectures allow for sweepable high-sensitivity dark photon searches at multiple frequencies simultaneously. As a proof-of-principle experiment, we designed and fabricated a three-qubit chip and successfully demonstrated a scalable dark-photon search. Our Letter established constraints on dark photons in the mass range of 15.632-15.638, 15.838-15.845, and 16.463-16.468 μeV, simultaneously, and the constraints are much more stringent than the cosmology constraints. In the future, our Letter can be scaled up to boost the scrutiny of new physics.

arXiv:2503.18315•Physical Review Letters•Oct 7, 2025•8 citations

A Cryogenic Superconducting Quantum Computing Unit Interface Chipset With Phase-Detection-Based Readout and Phase-Shifter-Based Controller

Yanshu Guo, Yaoyu Li, Wenqiang Huang +9 more

This article presents a cryogenic quantum interface chipset at 3.5 K for superconducting transmon qubit operations. The chipset comprises a phase-detection readout and a phase-shifter-based polar-modulation controller with flexible scalability. With the proposed phase-detection readout scheme, a 9-bit time-to-digital converter (TDC)-based state detector is used to read out the qubit state by detecting the phase difference between the stimulus signal and the reflected signal. A low-IF N-path filter-based receiver and a multi-tone transmitter are co-designed to enable frequency-division multiplexing (FDM) dispersive readout of multiple qubits. A phase-shifter-based polar-modulation XY-driver is developed with support for fast phase quantum gate operation and derivative-removal-by-adiabatic-gate (DRAG) pulse generation. The Z-driver is realized using a static digital-to-analog converter (DAC) array and a 10-bit dynamic DAC for power efficiency. Fabricated in a 28-nm bulk CMOS process, the chipset occupies a die area of 4.6 mm2. The readout RX achieves a noise temperature of 40 K with a gain of 45–83 dB and a bandwidth of 1.2 GHz. The readout RX consumes 32% less power than state-of-the-art designs. The measured total readout power for simultaneous detection of two qubits is 12.2 mW, which is the lowest among readouts with a similar integration level. In addition, the controller achieves a spurious-free dynamic range (SFDR) of 49 dB for a 1-GS/s Z-driver and an SNR of 42 dB for a 1-GS/s XY-driver. The XY-driver consumes 4.3 mW per qubit under active control. Verified with practical transmon qubits, the readout fidelity exceeds 92.6%, approaching that of commercial instruments. A Rabi experiment at 5.61/6.36 MHz, a Ramsey experiment at 4.1 MHz, and a T1 experiment at$9.98~{\mu }$s are also successfully observed using the proposed chipset at 3.5 K.

IEEE Journal of Solid-State Circuits•May 27, 2026•2 citations
Modern experiments in particle physics, astroparticle physics, and cosmology increasingly rely on large cryogenic sensor arrays to achieve the sensitivity needed to probe phenomena beyond the Standard Model, including the neutrino-mass scale, dark-matter interactions, neutrinoless double-beta decay, and B-mode polarization of the cosmic microwave background. These efforts require the simultaneous readout of tens to hundreds of thousands of detectors, pushing current data-acquisition technologies and motivating the use of frequency-division multiplexing, particularly microwave SQUID multiplexing (𝜇MUX), to scale to such array sizes. In this work we present the Quantum Interface Controller (QIC), a modular software-defined radio platform for high-fidelity, scalable readout of cryogenic detectors and superconducting qubits. Based on Xilinx Zynq UltraScale+ MPSoC and RFSoC technology, the QIC integrates multi-gigahertz DACs/ADCs, FPGA-based real-time processing, and a unified software stack, supporting both DirectRF generation and super-heterodyne sampling to synthesize and demodulate thousands of microwave tones per unit. A firmware-integrated Cryogenic Detector Emulator (CryoDE) provides a digital detector twin for hardware-in-the-loop validation. This paper presents the QIC architecture, firmware and software environment, it is currently being utilized in the ECHo neutrino-mass experiment, the BULLKID-DM dark-matter search, and for superconducting-qubit readout in quantum-computing applications, demonstrating its suitability as a scalable platform for next-generation quantum-sensor arrays.
This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.
We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.
We present a control and measurement setup for superconducting qubits based on the Xilinx 16-channel radio-frequency system-on-chip (RFSoC) device. The proposed setup consists of four parts: multiple RFSoC boards, a setup to synchronize every digital to analog converter (DAC) and analog to digital converter (ADC) channel across multiple boards, a low-noise direct current supply for tuning the qubit frequency, and cloud access for remotely performing experiments. We also designed the setup to be free of physical mixers. The RFSoC boards directly generate microwave pulses using sixteen DAC channels up to the third Nyquist zone, which are directly sampled by its eight ADC channels between the fifth and the ninth zones.
Transition Edge Sensors (TESs) are highly sensitive cryogenic detectors widely used in astronomy, high-energy physics and nuclear radiation detection. As TES is increasingly deployed in large-scale arrays to improve sensitivity and effective collecting area, multiplexed readout becomes essential for reducing system complexity. Microwave SQUID multiplexing (μMUX) technology combining superconducting resonators with radio-frequency superconducting quantum interference devices (RF-SQUIDs), represents a state-of-the-art solution. In this work, a room-temperature readout prototype for TES μMUX readout was designed. The system features a scalable two-stage architecture, including a highly integrated, chassis-independent front-end signal processing module and back-end event-reconstruction module. A high-frequency-resolution frequency-comb signal generation method with real-time, per-tone frequency and phase tunability was developed. In addition, optimization of the firmware implementation effectively overcomes the computational-resource bottleneck of the Field Programmable Gate Array (FPGA). The prototype supports autonomous frequency sweeping, parameter diagnostics, and online event reconstruction. Self-test shows S 21 phase noise better than −110 dBc/Hz at −30 dBm, remaining stable with increasing channel count. Joint tests with a μMUX cryogenic system successfully captured the RF-SQUID response and achieved an equivalent noise current of 44 pA/√Hz referred to the TES, validating the prototype as a practical solution of the room-temperature system for TES μMUX readout.
The dark photon is a well-motivated dark matter candidate that appears in many extensions of the standard model. A fundamental mass-range-sensitivity dilemma is always haunting the dark photon search experiments: resonant haloscopes have excellent sensitivity but are narrowband, while nonresonant haloscopes are broadband but not as sensitive as the resonant ones. A scalable architecture integrating numerous resonant haloscopes would be a desirable solution to this dilemma. However, even the concept of a scalable search remains rarely explored due to the size limitation of conventional haloscopes imposed by the dark photon wavelength. Here, we propose and demonstrate a novel architecture using superconducting qubits as subwavelength haloscope units. By virtue of the scalability of superconducting qubits, it is possible to integrate multiple qubits with different frequencies on a chip-scale device. Furthermore, the frequencies of the qubits can be tuned to extend the search mass range. Thus, our scalable architectures allow for sweepable high-sensitivity dark photon searches at multiple frequencies simultaneously. As a proof-of-principle experiment, we designed and fabricated a three-qubit chip and successfully demonstrated a scalable dark-photon search. Our Letter established constraints on dark photons in the mass range of 15.632-15.638, 15.838-15.845, and 16.463-16.468 μeV, simultaneously, and the constraints are much more stringent than the cosmology constraints. In the future, our Letter can be scaled up to boost the scrutiny of new physics.
This article presents a cryogenic quantum interface chipset at 3.5 K for superconducting transmon qubit operations. The chipset comprises a phase-detection readout and a phase-shifter-based polar-modulation controller with flexible scalability. With the proposed phase-detection readout scheme, a 9-bit time-to-digital converter (TDC)-based state detector is used to read out the qubit state by detecting the phase difference between the stimulus signal and the reflected signal. A low-IF N-path filter-based receiver and a multi-tone transmitter are co-designed to enable frequency-division multiplexing (FDM) dispersive readout of multiple qubits. A phase-shifter-based polar-modulation XY-driver is developed with support for fast phase quantum gate operation and derivative-removal-by-adiabatic-gate (DRAG) pulse generation. The Z-driver is realized using a static digital-to-analog converter (DAC) array and a 10-bit dynamic DAC for power efficiency. Fabricated in a 28-nm bulk CMOS process, the chipset occupies a die area of 4.6 mm2. The readout RX achieves a noise temperature of 40 K with a gain of 45–83 dB and a bandwidth of 1.2 GHz. The readout RX consumes 32% less power than state-of-the-art designs. The measured total readout power for simultaneous detection of two qubits is 12.2 mW, which is the lowest among readouts with a similar integration level. In addition, the controller achieves a spurious-free dynamic range (SFDR) of 49 dB for a 1-GS/s Z-driver and an SNR of 42 dB for a 1-GS/s XY-driver. The XY-driver consumes 4.3 mW per qubit under active control. Verified with practical transmon qubits, the readout fidelity exceeds 92.6%, approaching that of commercial instruments. A Rabi experiment at 5.61/6.36 MHz, a Ramsey experiment at 4.1 MHz, and a T1 experiment at9.98 μ9.98~{\mu }9.98 μs are also successfully observed using the proposed chipset at 3.5 K.