Mechanical oscillators in the quantum regime hold promise for quantum sensing, frequency conversion and information processing. Because mechanical motion is linear, coupling to an external nonlinear system, such as a qubit, is essential for these applications. Recent advances in piezoelectric interfaces between mechanical oscillators and superconducting qubits have successfully demonstrated precise control of non-classical states of motion. However, challenges associated with heterogeneous integration of piezoelectric materials have limited mechanical quality factors in these systems to around one million, constraining their broader utility. In this thesis, we explore an alternative approach that harnesses the nonlinearity of electrostatic forces to engineer interactions between superconducting circuits and mechanical oscillators. This strategy allows us to employ mechanical oscillators made of silicon, a non-piezoelectric material with extremely low acoustic loss. We reach the strong coupling regime between a superconducting qubit and a long-lived mechanical oscillator with a quality-factor of around a billion. We employ this system to generate non-classical states of motion that exhibit clear signatures of quantum behavior. Furthermore, we explore the origins of acoustic decoherence and implement strategies to mitigate its impact. The mechanical lifetimes, which exceed those of best superconducting qubits, open new possibilities for storing and processing microwave quantum information in motional states. Furthermore, our material-agnostic approach is broadly applicable to a variety of material platforms that possess significance for quantum science but lack a piezoelectric response.
Mechanical oscillators in the quantum regime hold promise for quantum sensing, frequency conversion and information processing. Because mechanical motion is linear, coupling to an external nonlinear system, such as a qubit, is essential for these applications. Recent advances in piezoelectric interfaces between mechanical oscillators and superconducting qubits have successfully demonstrated precise control of non-classical states of motion. However, challenges associated with heterogeneous integration of piezoelectric materials have limited mechanical quality factors in these systems to around one million, constraining their broader utility. In this thesis, we explore an alternative approach that harnesses the nonlinearity of electrostatic forces to engineer interactions between superconducting circuits and mechanical oscillators. This strategy allows us to employ mechanical oscillators made of silicon, a non-piezoelectric material with extremely low acoustic loss. We reach the strong coupling regime between a superconducting qubit and a long-lived mechanical oscillator with a quality-factor of around a billion. We employ this system to generate non-classical states of motion that exhibit clear signatures of quantum behavior. Furthermore, we explore the origins of acoustic decoherence and implement strategies to mitigate its impact. The mechanical lifetimes, which exceed those of best superconducting qubits, open new possibilities for storing and processing microwave quantum information in motional states. Furthermore, our material-agnostic approach is broadly applicable to a variety of material platforms that possess significance for quantum science but lack a piezoelectric response.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
The past 20 years has seen rapid developments in circuit quantum electrodynamics, where superconducting qubits and resonators are used to control and study quantum light-matter interaction at a fundamental level. The development of this field is strongly influenced by quantum information science and the prospect of realizing quantum computation, but also opens up opportunities for combinations of different physical systems and research areas. Superconducting circuits in the microwave domain offer a versatile platform for interfacing with other quantum systems thanks to strong nonlinearities and zero-point fluctuations, as well as flexibility in design and fabrication. Hybrid quantum systems based on circuit quantum electrodynamics could enable novel functionalities by exploiting the strengths of the individual components.This thesis covers experiments coupling superconducting circuits to surface acoustic waves (SAWs), mechanical waves propagating along the surface of a solid. Strong coupling can be engineered using the piezoelectric properties of GaAs substrates, and our experiments exploit this to investigate phenomena in quantum field-matter interaction. A key property of surface acoustic waves is the slow propagation speed, typically five orders of magnitude slower than light in vacuum, and the associated short wavelength. This enables the giant atom regime where the artificial atom in the form of a superconducting circuit is large compared to the wavelength of interacting SAW radiation, a condition which is difficult to realize in other systems. Experiments described in this thesis use these properties to demonstrate electromagnetically induced transparency for a mechanical mode, as well as non-Markovian interactions between an artificial giant atom and the SAW field. When the SAW field is confined to a resonant cavity, the short wavelength allows multimode spectra suitable for interacting with a frequency comb. We use a multimode SAW resonator to characterize the ensemble of microscopic two-level system defects with a two-tone spectroscopy approach. Finally, we introduce a hybrid superconducting-SAW resonator with applications in quantum information processing in mind. Experiments with this device demonstrate entanglement of SAW modes, and show promising results on the way to engineer cluster states for quantum computation in continuous variables.
High-frequency mechanical resonators subjected to low thermal phonon occupancy are easier to be prepared to the ground state by direct cryogenic cooling. Their extreme stiffness, however, poses a significant challenge for external interrogations. Here we demonstrate a superconducting cavity piezoelectromechanical system in which multiple modes of a bulk acoustic resonator oscillating at 10 GHz are coupled to a planar microwave superconducting resonator with a cooperativity exceeding 2×10^{3}, deep in the strong coupling regime. By implementation of the noncontact coupling scheme to reduce mechanical dissipation, the system exhibits excellent coherence characterized by a frequency-quality-factor product of 7.5×10^{15} Hz. Interesting dynamics of classical temporal oscillations of the microwave energy is observed, implying the coherent conversion between phonons and photons. The demonstrated high-frequency cavity piezoelectromechanics is compatible with superconducting qubits, representing an important step towards hybrid quantum systems.
Due to its high coherence in transmission over a large distance in the ambient environment, the quantum optical system has been a prevailing platform for long-distance quantum communication, which was recently realized over a continental distance with a low earth orbit satellite and ground stations [102, 70]. However, the pure quantum optical system has so far shown weak interactions between photon and matter, which makes it inefficient in carrying out deterministic quantum gates for quantum repeater based scalable quantum network and quantum computing. On the other hand, superconducting quantum systems operating in the microwave domain with Josephson junction transmon qubits have proven to be capable of efficient deterministic quantum operations on quantum states [86, 87, 66]. Nevertheless, such architecture is prone to errors and decoherence due to cross-talk between microwave elements in a large-scale superconducting quantum circuit. Furthermore, superconducting systems, in general, also have large footprint (100s um) elements (resonators and superconducting quantum bits) [92, 60] that limit the ability to scale up a superconducting quantum system. Moreover, microwave quantum circuits require cooling to around 10 mK, making it unsuitable for communicating quantum information outside a dilution refrigerator (DF). Micro- and nano- acoustic elements have been extensively used in conventional integrated information processing systems due to their compactness and high coherence [97]. Acoustic systems in quantum engineering also have the advantage of being a platform for universal couplings between various quantum systems including spins, optical photons, and superconducting circuits. As it will be discussed in this thesis, elements critical to scalable optical quantum network and superconducting quantum circuit can be constructed relying on the cavity optomechanics and piezoelectric interactions. Optomechanical interaction is concerned with the light pressure coupling of cavity mechanical deformation to a strong optical field. This interaction has allowed the close to mechanical ground state cooling of mechanical resonators using laser and the ultra-sensitive displacement measurement that led to the detection of gravitational waves in the LIGO collaboration [125, 25]. Optomechanical crystals (OMCs) are lithographically patterned devices which contain a periodic structure that host bandgaps for both optical band electromagnetic waves and microwave band acoustic waves. A properly engineered defect in the crystal can confine and localize acoustic and electromagnetic modes of similar wavelengths into a small mode volume [17, 20, 21]. A strong optomechanical coupling, which can be achieved between such strongly confined co-localized optical and acoustic modes, can be used in engineering the quantum state of mechanical motion to realize useful quantum devices such as a high-coherence quantum memory [74] and an optomechanical high efficiency optical isolator for unidirectionally connecting distant optical cavities via an acoustic bus [37]. To strongly couple the mechanical degree of freedom with a superconducting quantum circuit, various methods can be used, ranging from electromechanic coupling (electric coupling to a mechanically compliant capacitor), magnetomechanical coupling (magnetic coupling to a vibrating SQUID loop), and piezoelectric coupling. The recent advent of quantum acoustics [23, 8, 9] was realized with the strong piezoelectric coupling between a superconducting transmon qubit and a high-coherence mechanical resonator. The engineered strong piezoacoustic coupling provides the possibility to carry out deterministic ultra-high fidelity two-qubit quantum gates on non-classical mechanical quantum states [52]. This ability together with the recent demonstration of ultra-long phonon lifetime mechanical resonators show the possibility of integrating the ultra-high quality mechanical resonator as a compact quantum memory element and even a new ultra-compact (10s um) quantum bit architecture for scalable superconducting quantum circuits. Furthermore, the strong piezoelectric coupling that can transduce quantum state in a superconducting circuit into mechanical wave also makes it possible to efficiently transduce a quantum state between a superconducting quantum circuit and a telecommunication band optical channel via a mechanical waveguide connected to an optomechanical crystal cavity.
Microscale and nanoscale mechanical resonators have been used in advanced technological applications, from high precision time keeping and mass sensing, to processing high frequency signals in mobile communications. In the last few decades, they have been an important part of progress in the field of quantum information and metrology and have been proposed as quantum memories or transducers for measuring or connecting different types of quantum systems. The field of cavity optomechanics and electromechanics is concerned with coupling the electromagnetic field of a resonant optical cavity or electrical circuit to mechanical motion. These systems provide potential means to control and engineer the state of a mechanical object at the quantum level. This thesis contains the description of mechanical systems in megahertz to a few hundred megahertz frequency range formed by nano-fabricating photonic, phononic, and electrical circuits on a chip. These structures are designed to provide a large radiation pressure coupling between mechanical motion and electromagnetic fields to address and manipulate motional degrees of freedom. Qualitatively novel quantum effects are expected when one takes a step beyond linear coupling and exploits higher order interactions. To that end, we integrate electrical, mechanical and photonic structures in a multimode photonic crystal structure to observe "x2-coupling", where the optical cavity frequency is coupled to the square of the mechanical displacement. Moreover, we have developed two integrated on-chip platforms based on Si3N4 and Si nanomembranes capable of interfacing superconducting qubits and optical photons and realizing reversible microwave-to-optical conversion. We employ radiation pressure to cool these mechanical resonators to their quantum ground state. Finally, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons of frequency ωm/2π = 0.425 GHz by capacitively coupling a phononic crystal acoustic cavity to a superconducting microwave resonator. Moving to higher frequency acoustic cavities not only facilitates the integration of electromechanical circuits and nanophotonic systems capable of operation in the resolved sideband limit of optomechanics for noise-free quantum signal conversion, but it opens up the possibility of using phonons as information carriers via phononic circuits. Utilizing a two-photon resonance condition for efficient microwave pumping and phononic bandgap shield to eliminate acoustic radiation, we achieve large cooperative electromechanical coupling (C ≈ 30) and intrinsic decay time of 2.3 ms. Moreover, electrical read-out of the phonon occupancy shows that the acoustic mode thermalizes close to its quantum ground-state of motion (phonon occupancy nm=1.5) at a fridge temperature of Tf = 10 mK. We conclude by considering several designs and fabrication improvements to the hypersonic electromechanical crystals that would enable them to perform quantum conversion between the electrical and acoustic domain.