Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Shortwave frequency-hopping reception via a Rydberg atom-based electrically small antenna

Siyuan Qiu, Hong-Lei Wang, X. -Q Liu, Zheng-Qi Du, Yi-Qi Guo, Hai-Tao Tu, Yan Xu, Tengfei Miao, Hui Yan, Kai-Yu Liao

Published Jan 19, 2026• 1 citation
Publisher

Abstract

There is an inherent trade-off in shortwave (SW) signal reception between achieving wide operational bandwidth and high radio sensitivity. Advances in SW radio reception hold significant potential for applications in communications, broadcasting, and over-the-horizon radar. Here, we demonstrate a proof-of-concept Rydberg SW receiver integrated with the frequency-hopping technique, achieving a highly sensitive reception compatible with large bandwidth. By shifting a carrier across the whole SW band, the atomic communication maintains a stable and high data capacity far beyond the Chu–Harrington limit. The outcomes of our work facilitate the development of Rydberg atom-based RF field sensing and communication.

DOI
10.1063/5.0306974

Related papers

Shortwave Ultrahigh-Sensitivity Rydberg Atomic Electric Field Sensing Based on a Subminiature Resonator

Ruiqi Mao, Yi Lin, Aojie Zhou +2 more

Rydberg atomic electric field sensors have attracted the attention of international researchers due to their powerful electric field measurement capabilities. Especially in the shortwave (SW) frequency band (3–30 MHz), using only millimeter-level sensors to receive SW signals is undoubtedly attractive. However, due to the extremely difficult excitation of the Rydberg atoms that resonate with the SW frequency, the sensitivity of the Rydberg atoms SW measurement is low. Here, we report that a method to improve the SW sensitivity by using an SW resonator, which is extremely small in electrical size ($0.0043\lambda \times 0.0035\lambda \times 0.007\lambda $), can achieve continuous resonant frequency coverage from 9.365 to 10.223 MHz and can increase the sensitivity of electric field measurement by a factor of 8633. In the state of far off-resonant, we have achieved a detectable field strength as low as$2.41~\mu $V/m with a sensitivity of$1.71~\mu $V/mHz$^{1/2}$using the heterodyne Rydberg atom-based mixer method, which realizes ultrahigh-sensitivity measurement of SWs. In addition, for the first time outside the laboratory, we directly received an amplitude-modulated broadcast signal with 880 km (the straight-line distance between Changsha and Baoji) at 9.81 MHz in the form of a subminiature resonator combined with a Rydberg field probe (RFP), which verified the powerful ability of this sensing scheme.

IEEE Transactions on Antennas and Propagation•Aug 13, 2024•20 citations

Broadband frequency hopping by Rydberg atoms with high orbital angular momentum states

Yanjie Tong, Zongkai Liu, Qiming Ren +8 more

Communication technologies advance toward secure communication, with frequency hopping communication (FH-C) widely used. However, traditional FH-C is limited by slow hopping speed, narrow bandwidth, and a few hopping points. Rydberg atoms offer a solution but face challenges like poor non-resonant microwave sensitivity and local oscillator synchronization limits. Here, we propose a frequency-hopping receiver based on atomic heterodyne detection that employs high orbital angular momentum (high-OAM) Rydberg states for resonant detection of rapidly hopping radio-frequency signals across multiple, widely separated frequency bands. The high-OAM Rydberg atoms ( l =3,4,5) resonantly detect 315 MHz, 1.7 GHz, and 29.74 GHz RF hopping signals (spanning 6 octaves). With heterodyne detection and a continuous excitation scheme, the system eliminates spectral establishment time, achieving 60 khops/s without transmitter-receiver synchronization, and uses frequency combs to extend hopping points to 5 MHz around resonant frequencies. These advances demonstrate the potential of Rydberg-atom–based receivers for high-speed and wide-band frequency-hopping communication.

Optics Express•Jan 27, 2026•0 citations

High-Sensitivity Rydberg-Atom-Based Phase-Modulation Receiver for Frequency-Division-Multiplexing Communication

Yafen Cai, Shuai Shi, Yijia Zhou +4 more

Due to the exaggerated properties of highly excited atomic states, a Rydberg-atom-based microwave receiver holds the promise to achieve superior performances in microwave metrology and communication when compared to conventional antennas. However, developing long-distance communication applications based on Rydberg atomic receiver remains challenging, because it requires the simultaneous achievement of low bit error rate (BER), high symbol rate, and weak carrier amplitude. The key to tackle this problem is to encode the information with a proper scheme that maintains high sensitivity and robustness of the Rydberg atomic receiver. Here, we use Rydberg atom-based heterodyne detection for the reception of phase-modulated microwave field, and demonstrate more than one order of magnitude improvement in reception sensitivity compared to the previously investigated amplitude-modulation scheme. Therefore, we achieve low BER communication with high symbol rate of 12 k bit/s and weak carrier amplitude of $13\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}$ simultaneously. Furthermore, we also demonstrate that our scheme is compatible with frequency-division-multiplexing communication.

Physical Review Applied•Apr 25, 2023•42 citations

Reception of a Broadband Noise-Like Spread Spectrum Waveform Using a Rydberg Atom-Based Quantum RF Receiver

Hoang-Van Do, David Bair, Eric Bottomley +3 more

We present experimental results demonstrating broadband reception of a noise-like spread-spectrum waveform using a Rydberg atom-based quantum radio frequency (RF) receiver. The transmitted waveform occupies a 20 MHz bandwidth around a 2.5 GHz carrier and is intentionally engineered to exhibit noise-like spectral characteristics. To enable recovery of this broadband signal, the Rydberg sensor was configured to achieve sufficiently uniform sensitivity across intermediate frequencies up to 10 MHz (corresponding to a ±10 MHz signal band about the carrier, i.e., 20 MHz total bandwidth). Under these conditions, we demonstrate successful detection and recovery of noise-like spread-spectrum waveforms spanning a 20 MHz bandwidth. These results validate the feasibility of using atomic sensors for broadband RF waveform reception and highlight their potential in photonics-enabled RF sensing applications.

IEEE photonics journal•Apr 9, 2026•0 citations

Quantum-Based Amplitude Modulation Radio Receiver Using Rydberg Atoms

Zhenfei Song, Wanfeng Zhang, Xiaochi Liu +4 more

The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.

IEEE Globecom Workshops (GC Wkshps)•Dec 1, 2018•9 citations

Rydberg atomic field-enhanced feed beyond electrically small antennas

Jia-Dou Nan, Qianqian Zhang, Hao-Yu Fan +9 more

The reception of electromagnetic signals becomes increasingly challenging at longer wavelengths, as conventional antenna feeds must scale with the operating wavelength, making it difficult to reconcile compactness with high sensitivity. Rydberg atoms enable direct field-to-optical conversion within deeply subwavelength sensing volumes, yet an effective receiving feed that couples incident fields into the atomic interaction volume remains underdeveloped. Here, we introduce a Rydberg atomic field-enhanced feed (RAFEF) that integrates electromagnetic field capture and enhancement with Rydberg-atomic transduction. We establish a physical model to quantify its receiving capability, Phi, that jointly accounts for sensitivity enhancement, receiving bandwidth and normalized three-dimensional volume, and experimentally obtain Phi_dB = 70.81 dB. Compared with a conventional loop-antenna feed, the RAFEF provides a higher received SNR and overall receiving capability, while its tunable narrowband response enables frequency selectivity directly at the receiving-feed stage. We further demonstrate selective recovery of a target channel from simultaneously incident signals and reception of a 93.5 MHz FM broadcast after approximately 10 km of over-the-air propagation. These results establish the RAFEF as an atomic receiving-feed architecture that exploits localized electric-field transduction to extend Rydberg-atomic reception beyond conventional electrically small antenna feeds.

arXiv:2610.35315•Oct 26, 2026•0 citations
There is an inherent trade-off in shortwave (SW) signal reception between achieving wide operational bandwidth and high radio sensitivity. Advances in SW radio reception hold significant potential for applications in communications, broadcasting, and over-the-horizon radar. Here, we demonstrate a proof-of-concept Rydberg SW receiver integrated with the frequency-hopping technique, achieving a highly sensitive reception compatible with large bandwidth. By shifting a carrier across the whole SW band, the atomic communication maintains a stable and high data capacity far beyond the Chu–Harrington limit. The outcomes of our work facilitate the development of Rydberg atom-based RF field sensing and communication.
Rydberg atomic electric field sensors have attracted the attention of international researchers due to their powerful electric field measurement capabilities. Especially in the shortwave (SW) frequency band (3–30 MHz), using only millimeter-level sensors to receive SW signals is undoubtedly attractive. However, due to the extremely difficult excitation of the Rydberg atoms that resonate with the SW frequency, the sensitivity of the Rydberg atoms SW measurement is low. Here, we report that a method to improve the SW sensitivity by using an SW resonator, which is extremely small in electrical size ($0.0043\lambda \times 0.0035\lambda \times 0.007\lambda $), can achieve continuous resonant frequency coverage from 9.365 to 10.223 MHz and can increase the sensitivity of electric field measurement by a factor of 8633. In the state of far off-resonant, we have achieved a detectable field strength as low as$2.41~\mu $V/m with a sensitivity of$1.71~\mu V/mHzV/mHzV/mHz^{1/2}$using the heterodyne Rydberg atom-based mixer method, which realizes ultrahigh-sensitivity measurement of SWs. In addition, for the first time outside the laboratory, we directly received an amplitude-modulated broadcast signal with 880 km (the straight-line distance between Changsha and Baoji) at 9.81 MHz in the form of a subminiature resonator combined with a Rydberg field probe (RFP), which verified the powerful ability of this sensing scheme.
Communication technologies advance toward secure communication, with frequency hopping communication (FH-C) widely used. However, traditional FH-C is limited by slow hopping speed, narrow bandwidth, and a few hopping points. Rydberg atoms offer a solution but face challenges like poor non-resonant microwave sensitivity and local oscillator synchronization limits. Here, we propose a frequency-hopping receiver based on atomic heterodyne detection that employs high orbital angular momentum (high-OAM) Rydberg states for resonant detection of rapidly hopping radio-frequency signals across multiple, widely separated frequency bands. The high-OAM Rydberg atoms ( l =3,4,5) resonantly detect 315 MHz, 1.7 GHz, and 29.74 GHz RF hopping signals (spanning 6 octaves). With heterodyne detection and a continuous excitation scheme, the system eliminates spectral establishment time, achieving 60 khops/s without transmitter-receiver synchronization, and uses frequency combs to extend hopping points to 5 MHz around resonant frequencies. These advances demonstrate the potential of Rydberg-atom–based receivers for high-speed and wide-band frequency-hopping communication.
Due to the exaggerated properties of highly excited atomic states, a Rydberg-atom-based microwave receiver holds the promise to achieve superior performances in microwave metrology and communication when compared to conventional antennas. However, developing long-distance communication applications based on Rydberg atomic receiver remains challenging, because it requires the simultaneous achievement of low bit error rate (BER), high symbol rate, and weak carrier amplitude. The key to tackle this problem is to encode the information with a proper scheme that maintains high sensitivity and robustness of the Rydberg atomic receiver. Here, we use Rydberg atom-based heterodyne detection for the reception of phase-modulated microwave field, and demonstrate more than one order of magnitude improvement in reception sensitivity compared to the previously investigated amplitude-modulation scheme. Therefore, we achieve low BER communication with high symbol rate of 12 k bit/s and weak carrier amplitude of $13\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}$ simultaneously. Furthermore, we also demonstrate that our scheme is compatible with frequency-division-multiplexing communication.
We present experimental results demonstrating broadband reception of a noise-like spread-spectrum waveform using a Rydberg atom-based quantum radio frequency (RF) receiver. The transmitted waveform occupies a 20 MHz bandwidth around a 2.5 GHz carrier and is intentionally engineered to exhibit noise-like spectral characteristics. To enable recovery of this broadband signal, the Rydberg sensor was configured to achieve sufficiently uniform sensitivity across intermediate frequencies up to 10 MHz (corresponding to a ±10 MHz signal band about the carrier, i.e., 20 MHz total bandwidth). Under these conditions, we demonstrate successful detection and recovery of noise-like spread-spectrum waveforms spanning a 20 MHz bandwidth. These results validate the feasibility of using atomic sensors for broadband RF waveform reception and highlight their potential in photonics-enabled RF sensing applications.
The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.
The reception of electromagnetic signals becomes increasingly challenging at longer wavelengths, as conventional antenna feeds must scale with the operating wavelength, making it difficult to reconcile compactness with high sensitivity. Rydberg atoms enable direct field-to-optical conversion within deeply subwavelength sensing volumes, yet an effective receiving feed that couples incident fields into the atomic interaction volume remains underdeveloped. Here, we introduce a Rydberg atomic field-enhanced feed (RAFEF) that integrates electromagnetic field capture and enhancement with Rydberg-atomic transduction. We establish a physical model to quantify its receiving capability, Phi, that jointly accounts for sensitivity enhancement, receiving bandwidth and normalized three-dimensional volume, and experimentally obtain Phi_dB = 70.81 dB. Compared with a conventional loop-antenna feed, the RAFEF provides a higher received SNR and overall receiving capability, while its tunable narrowband response enables frequency selectivity directly at the receiving-feed stage. We further demonstrate selective recovery of a target channel from simultaneously incident signals and reception of a 93.5 MHz FM broadcast after approximately 10 km of over-the-air propagation. These results establish the RAFEF as an atomic receiving-feed architecture that exploits localized electric-field transduction to extend Rydberg-atomic reception beyond conventional electrically small antenna feeds.