Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Aplicações da função Wq de Lambert-Tsallis e da disentropia em distribuição quântica chaves

Joacir Soares de Andrade

Published Jan 1, 2024• 0 citations
OpenAlex

Abstract

This work is about quantum key distribution and it is divided into theoretical and experimental parts. In the theoretical part, the Lambert-Tsallis Wq function is used to find the analytical formula for the channel’s length that maximizes the secure bit transmission rate in an optical network with classical and quantum signals in the same optical fiber, using different wavelengths, and taking into account the spontaneous Raman scattering. Following, Wq is used to calculate the fluctuation of carriers in a SiO2 integrated amplitude modulator used in continuous variable QKD, as well as in the calculation of the parameter that models a stochastic quantum channel with transmissivity with uniform distribution. At last, a new quantum key distribution protocol, named disentropy-based QKD, is proposed. This protocol uses only amplitude modulation and it detects the eavesdropping action by calculating the disentropy. It is the first QKD protocol that does not use quantum error rate to detect the eavesdropping and it is also the QKD protocol with the simplest implementation ever proposed. In the experimental part, the experimental results of a remotely controlled single-photon detector are presented.

Related papers

Applications of the Lambert–Tsallis W q function in QKD

Ranara Louise Campos Damasceno, Joacir Soares de Andrade, Rubens Viana Ramos

The Lambert–Tsallis W q function has found applications in several areas of physics, such as quantum optics, astronomy, and semiconductor physics. In this work, we discuss some applications of W q in quantum key distribution (QKD). Three problems are considered: (i) the quantum access network, (ii) analysis of an on-chip SiO 2 amplitude modulator used in continuous-variable QKD (CV-QKD), and (iii) parameter estimation of a stochastic quantum channel. In quantum access networks, QKD and classical data travel on the same optical fiber. In this case, an increase of the quantum bit error rate is caused mainly by the spontaneous Raman scattering (SRS) produced by classical data. The amount of SRS produced depends on the fiber length. In the present work, we use the Lambert–Tsallis W q function to calculate analytically the fiber length needed to produce a given level of SRS. Thus, our formula allows the calculation of the QKD channel’s length when the probability of a click on the receiver side without having any incident photons from the quantum transmitter is defined a priori . On the other hand, a crucial step in the security of CV-QKD is the correct channel transmissivity and excess noise estimations. These parameters can be overestimated or underestimated when real devices do not behave as predicted by their models. In this direction, using the W q function, we provide an equation for calculation of the fluctuation of the concentration of free carriers in an integrated amplitude modulator and another equation for calculation of the parameter that models a stochastic quantum channel. These equations are useful in building strategies to avoid quantum hacking.

Journal of the Optical Society of America B•Jul 24, 2023•4 citations

Quantum Key Distribution Technologies for Secured Passive Optical Networks

Alessandro Gagliano, Paola Parolari, Eliana Mazza +7 more

The integration of quantum key distribution (QKD) into passive optical networks (PONs) poses new challenges due to the specific characteristics of the access network, as the high losses from passive splitters and the spontaneous Raman scattering noise generated by classical channels co-propagating in the same optical fiber. In this paper, different QKD technologies and implementations are compared, taking into account both discrete-variable and continuous-variable QKD systems to maximize the achievable secret key rate performance in single-fiber bidirectional PONs.

International Conference on Transparent Optical Networks•Jul 6, 2025•0 citations

Análise e resultados experimentais de sistemas de distribuição quântica de chaves usando fótons isolados e estados coerentes mesoscópicos

Fábio Alencar Mendonça

In this dissertation it is realized a study about quantum key distribution (QKD) in optical networks. Initially, a review of the theory of quantum key distribution and some of its implementations with strongly attenuated coherent states, as well a review of an optical system for physical encryptation using mesoscopic coherent states are realized. Following, it is analyzed the use of an error correction scheme in the physical encryptation system, and two new schemes for quantum key distribution are proposed. The first is a possible implementation of a hybrid system, that is, using weak and mesoscopic coherent states, for QKD and quantum authentication of classical messages. The second is an implementation of a QKD system based on relative phase modulation of sidebands frequency, using two RF carriers and an amplitude modulator in Alice and a phase modulator in Bob. After, an experimental realization of a simple QKD setup using polarization states of strongly attenuated coherent states for B92 protocol is presented. At last, it is realized an experimental characterization of an optical receiver for optical communication applications.

•Jan 1, 2006•0 citations

Theoretical analysis of quantum key distribution systems when integrated with a DWDM optical transport network

Irina O. Vorontsova, R. Goncharov, Angelina Tarabrina +2 more

Theoretical research and numerical simulation of the noise influence caused by spontaneous Raman scattering, four-wave mixing, and linear channel cross talk on the performances of quantum key distribution (QKD) systems were conducted. Three types of QKD systems were considered: a coherent one-way QKD protocol, subcarrier-wave QKD system, and continuous-variable QKD integrated with classical dense wavelength division multiplexing (DWDM) channels. We calculate the secure key generation rate for the systems mentioned addressing different channel allocation schemes (i.e., configurations). A uniform DWDM grid is considered with a quantum channel located in the C-band and O-band (at 1310 nm) of a telecommunication window. The systems’ performances are analyzed in terms of the maximal achievable distance values. Configurations for further analysis and investigation are chosen optimally, i.e., their maximal achievable distances are the best.

arXiv:2209.15507•Journal of the Optical Society of America B•Nov 14, 2022•23 citations

Implementation of Quantum Key Distribution for Secure data transmission in Optical Communication

S. Krithiga, Ajay V, R Manoojitth +1 more

Quantum Key Distribution (QKD) is a potential defense against future quantum attacks that can break traditional encryption algorithms, such as RSA and ECC. The current work is based on the development of the BB84 protocol with the features of utilizing quantum mechanics and eavesdropping detection through signal disturbance. A simulation of the BB84 protocol was built using polarization encoding over a 10 km single-mode optical fiber using OptiSystem software. The system consists of standard telecom equipment, such as a continuous wave laser at a frequency of 193.1 THz, polarization controllers, and single-photon detectors. Both secure and insecure cases were simulated, where an attacker (Eve) had used an intercept-resend attack. The outcome showed significant Bit Error Rate (BER) and Quantum Bit Error Rate (QBER) increases during attacks, thus proving the protocol's vulnerability to interference. In addition, a special intrusion detection system based on BER was used to identify such anomalies in real-time. The simulation illustrates the feasibility of using QKD in today's optical networks to secure communications.

International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT)•Sep 12, 2025•0 citations

Experimental research on continuous variable quantum key distribution in fiber channel

GuiBao Dai, Qing Pan, Jianru Li +2 more

The use of quantum key distribution for encryption to realize the secure transmission of information is a research hotspot in the field of secure communication. In theory, it has a high degree of security with quantum mechanics as a guarantee. In particular, continuous variable quantum key distribution has the advantages of simple quantum state preparation, relatively high key rate and low detector cost, so it has attracted wide attention from all over the world. However, the continuous variable quantum key distribution will be affected by factors such as fiber type and fiber attenuation when it is transmitted in the fiber channel. Therefore, a large number of experimental tests must be carried out in the fiber channel before the quantum key distribution device is connected to the optical network. Therefore, this paper conducted continuous quantum key distribution experiments in different lengths of terrestrial optical fiber G.652D and submarine optical fiber G.654D. Among them, the quantum key generation rate reaches an average of 10kbit/s, and the quantum error rate is within 10%. As the distance increases, the variance of the transmission coefficient and the shot noise becomes smaller and the amplitude of the excess noise fluctuation becomes larger. The negotiation efficiency is above 92.44%. The experimental results show that continuous quantum key distribution has good compatibility in both G.652D and G.654D fibers. The experimental data provides a large amount of data support for subsequent research on the access of quantum key distribution equipment to optical networks.

International Conference on Laser, Optics and Optoelectronic Technology (LOPET)•Jun 24, 2021•0 citations
This work is about quantum key distribution and it is divided into theoretical and experimental parts. In the theoretical part, the Lambert-Tsallis Wq function is used to find the analytical formula for the channel’s length that maximizes the secure bit transmission rate in an optical network with classical and quantum signals in the same optical fiber, using different wavelengths, and taking into account the spontaneous Raman scattering. Following, Wq is used to calculate the fluctuation of carriers in a SiO2 integrated amplitude modulator used in continuous variable QKD, as well as in the calculation of the parameter that models a stochastic quantum channel with transmissivity with uniform distribution. At last, a new quantum key distribution protocol, named disentropy-based QKD, is proposed. This protocol uses only amplitude modulation and it detects the eavesdropping action by calculating the disentropy. It is the first QKD protocol that does not use quantum error rate to detect the eavesdropping and it is also the QKD protocol with the simplest implementation ever proposed. In the experimental part, the experimental results of a remotely controlled single-photon detector are presented.
The Lambert–Tsallis W q function has found applications in several areas of physics, such as quantum optics, astronomy, and semiconductor physics. In this work, we discuss some applications of W q in quantum key distribution (QKD). Three problems are considered: (i) the quantum access network, (ii) analysis of an on-chip SiO 2 amplitude modulator used in continuous-variable QKD (CV-QKD), and (iii) parameter estimation of a stochastic quantum channel. In quantum access networks, QKD and classical data travel on the same optical fiber. In this case, an increase of the quantum bit error rate is caused mainly by the spontaneous Raman scattering (SRS) produced by classical data. The amount of SRS produced depends on the fiber length. In the present work, we use the Lambert–Tsallis W q function to calculate analytically the fiber length needed to produce a given level of SRS. Thus, our formula allows the calculation of the QKD channel’s length when the probability of a click on the receiver side without having any incident photons from the quantum transmitter is defined a priori . On the other hand, a crucial step in the security of CV-QKD is the correct channel transmissivity and excess noise estimations. These parameters can be overestimated or underestimated when real devices do not behave as predicted by their models. In this direction, using the W q function, we provide an equation for calculation of the fluctuation of the concentration of free carriers in an integrated amplitude modulator and another equation for calculation of the parameter that models a stochastic quantum channel. These equations are useful in building strategies to avoid quantum hacking.
The integration of quantum key distribution (QKD) into passive optical networks (PONs) poses new challenges due to the specific characteristics of the access network, as the high losses from passive splitters and the spontaneous Raman scattering noise generated by classical channels co-propagating in the same optical fiber. In this paper, different QKD technologies and implementations are compared, taking into account both discrete-variable and continuous-variable QKD systems to maximize the achievable secret key rate performance in single-fiber bidirectional PONs.
In this dissertation it is realized a study about quantum key distribution (QKD) in optical networks. Initially, a review of the theory of quantum key distribution and some of its implementations with strongly attenuated coherent states, as well a review of an optical system for physical encryptation using mesoscopic coherent states are realized. Following, it is analyzed the use of an error correction scheme in the physical encryptation system, and two new schemes for quantum key distribution are proposed. The first is a possible implementation of a hybrid system, that is, using weak and mesoscopic coherent states, for QKD and quantum authentication of classical messages. The second is an implementation of a QKD system based on relative phase modulation of sidebands frequency, using two RF carriers and an amplitude modulator in Alice and a phase modulator in Bob. After, an experimental realization of a simple QKD setup using polarization states of strongly attenuated coherent states for B92 protocol is presented. At last, it is realized an experimental characterization of an optical receiver for optical communication applications.
Theoretical research and numerical simulation of the noise influence caused by spontaneous Raman scattering, four-wave mixing, and linear channel cross talk on the performances of quantum key distribution (QKD) systems were conducted. Three types of QKD systems were considered: a coherent one-way QKD protocol, subcarrier-wave QKD system, and continuous-variable QKD integrated with classical dense wavelength division multiplexing (DWDM) channels. We calculate the secure key generation rate for the systems mentioned addressing different channel allocation schemes (i.e., configurations). A uniform DWDM grid is considered with a quantum channel located in the C-band and O-band (at 1310 nm) of a telecommunication window. The systems’ performances are analyzed in terms of the maximal achievable distance values. Configurations for further analysis and investigation are chosen optimally, i.e., their maximal achievable distances are the best.
Quantum Key Distribution (QKD) is a potential defense against future quantum attacks that can break traditional encryption algorithms, such as RSA and ECC. The current work is based on the development of the BB84 protocol with the features of utilizing quantum mechanics and eavesdropping detection through signal disturbance. A simulation of the BB84 protocol was built using polarization encoding over a 10 km single-mode optical fiber using OptiSystem software. The system consists of standard telecom equipment, such as a continuous wave laser at a frequency of 193.1 THz, polarization controllers, and single-photon detectors. Both secure and insecure cases were simulated, where an attacker (Eve) had used an intercept-resend attack. The outcome showed significant Bit Error Rate (BER) and Quantum Bit Error Rate (QBER) increases during attacks, thus proving the protocol's vulnerability to interference. In addition, a special intrusion detection system based on BER was used to identify such anomalies in real-time. The simulation illustrates the feasibility of using QKD in today's optical networks to secure communications.
The use of quantum key distribution for encryption to realize the secure transmission of information is a research hotspot in the field of secure communication. In theory, it has a high degree of security with quantum mechanics as a guarantee. In particular, continuous variable quantum key distribution has the advantages of simple quantum state preparation, relatively high key rate and low detector cost, so it has attracted wide attention from all over the world. However, the continuous variable quantum key distribution will be affected by factors such as fiber type and fiber attenuation when it is transmitted in the fiber channel. Therefore, a large number of experimental tests must be carried out in the fiber channel before the quantum key distribution device is connected to the optical network. Therefore, this paper conducted continuous quantum key distribution experiments in different lengths of terrestrial optical fiber G.652D and submarine optical fiber G.654D. Among them, the quantum key generation rate reaches an average of 10kbit/s, and the quantum error rate is within 10%. As the distance increases, the variance of the transmission coefficient and the shot noise becomes smaller and the amplitude of the excess noise fluctuation becomes larger. The negotiation efficiency is above 92.44%. The experimental results show that continuous quantum key distribution has good compatibility in both G.652D and G.654D fibers. The experimental data provides a large amount of data support for subsequent research on the access of quantum key distribution equipment to optical networks.