Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Escaping the Millikelvin Death Spiral: A Systems Architecture for High-Tc Topological Processing

QNFO

Published Dec 10, 2025• 0 citations
Publisher

Abstract

Standard quantum architectures rely on dilution refrigeration to suppress thermal noise, tethering the industry to a non-scalable 20 mK thermal floor. The cooling power at millikelvin temperatures scales poorly, creating a “mainframe constraint” that limits widespread deployment. Here, a 4-Kelvin topological processor is proposed, utilizing twistronic symmetry breaking in Bi-2212 to engineer a 25 meV spectral gap. By integrating this intrinsic protection with RSFQ control logic and pulse tube cryogenics via a flip-chip architecture, a stability margin of $\Gamma \approx 20$ is achieved even with interface losses. This architecture eliminates the need for dilution refrigeration, enabling scalable, rack-mounted quantum processing.

DOI
10.5281/zenodo.17883043

Related papers

Thermodynamic Scaling of 4-Kelvin Topological Processors via Twistronic Bi-2212 Heterostructures

Quni-Gudzinas, Rowan Brad

Standard superconducting quantum processors are currently constrained by the thermodynamic bottleneck of millikelvin dilution refrigeration, which precludes the integration of high-speed control logic and limits scalability. This reliance on the 20 mK regime creates a “mainframe constraint” where the cooling infrastructure scales non-linearly with computational volume. Here, a 4-Kelvin topological processor architecture is introduced, utilizing twistronic Bi-2212 heterostructures with a 30 meV spectral gap. By engineering a time-reversal symmetry broken state at a 45-degree twist angle, a “thermal firewall” is established that suppresses decoherence ($\Gamma \approx 80$) at temperatures accessible to industrial pulse tube cryocoolers. This architecture enables the co-location of energy-efficient RSFQ control logic with the quantum plane, redefining the system as a portable, deployable technology.

•Dec 11, 2025•0 citations

Chiral High-Temperature Topological Processing: A Hardware-Intrinsic Stabilization Protocol

Quni-Gudzinas, Rowan Brad

Current quantum computing architectures face a thermodynamic bottleneck where the energy cost of classical error correction scales superlinearly with system size. Reliance on dilution refrigeration and active syndrome extraction imposes a latency penalty that renders hybrid paradigms unscalable for exascale applications. An architecture for Chiral High-Temperature Topological Processing (CHTP) is defined to leverage spontaneous symmetry breaking in twisted bilayers. Engineering a 45-degree twist between d-wave layers induces a chiral $d+id$ order parameter with a 25 meV spectral gap. This intrinsic thermodynamic protection suppresses thermal errors by a factor of $e^{-70}$ at 4 Kelvin. Monolithic integration of Rapid Single Flux Quantum (RSFQ) logic eliminates the input-output latency bottleneck inherent in room-temperature control. This framework establishes a rigorous blueprint for rack-mountable quantum hardware compatible with industrial Pulse Tube cryogenics.

•Nov 30, 2025•0 citations

SYSTEM AND METHOD FOR HIGH-TEMPERATURE TOPOLOGICAL QUANTUM PROCESSING VIA CHIRAL SYMMETRY BREAKING

QNFO

A quantum processing system for high-temperature topological quantum computing comprises a Cryogenic Enclosure operating at approximately 4 Kelvin. The system houses a Quantum Processor Module with a twisted bilayer high-temperature superconductor structure. This structure induces a chiral topological phase, hosting robust Majorana Zero Modes that serve as logical qubits. A Control Layer with YBCO-based Rapid Single Flux Quantum (RSFQ) Logic Circuits is monolithically integrated to perform braiding operations and readout, providing intrinsic error suppression through a large superconducting gap. This architecture eliminates the need for dilution refrigeration, enabling compact, industrially viable, and intrinsically fault-tolerant quantum processing.

•Nov 30, 2025•0 citations

Scalable Quantum Computing System with Integrated Millikelvin Cryogenic Electronics

Caleb Jordan, Aaron Somoroff, L. Palma +1 more

Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 6, 2025•0 citations

Development of a Cryogen-Free Dilution Refrigerator for Superconducting Quantum Computing

Yujia Zhai, Shiguang Wu, Dong Ma +5 more

The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.

IEEE Transactions on Applied Superconductivity•Jan 8, 2024•2 citations

Single Flux Quantum Circuit Operation at Millikelvin Temperatures

Jason Walter, Adam C. Weis, Kan-Ting Tsai +6 more

As quantum computing processors increase in size, there is growing interest in developing cryogenic electronics to overcome significant challenges to system scaling. Single flux-quantum (SFQ) circuits offer a promising alternative to remote, bulky, and power-hungry room temperature electronics. To meet the need for digital qubit control, readout, and co-processing, SFQ circuits must be adapted to operate at millikelvin temperatures near quantum processors. SEEQC's SFQuClass digital quantum management approach proximally places energy-efficient SFQ (ERSFQ) circuits and qubits in a multi-chip module. This enables extremely low power dissipation, compatible with a typical dilution cryostat's limited cooling power, while maintaining high processing speed and low error rates. We report on systematic testing from 4 K to 10 mK of a comprehensive set of ERSFQ cells, as well as more complex circuits such as programmable counters and demultiplexers used in digital qubit control. We compare the operating margins and error rates of these circuits and find that, at millikelvin, bias margins decrease and the center of the margins (i.e., the optimal bias current value) increases by ~15%, compared to 4.2 K. The margins can be restored by thermal annealing by reducing Josephson junction (JJ) critical current Ic. To provide guidance for how circuit parameters vary from 4.2 K to millikelvin, relevant analog process control monitors (PCMs) were tested in the temperature range of interest. The measured JJ critical current (of the PCM JJ arrays) increases by ~15% when decreasing temperature from 4.2 K to millikelvin, in good agreement with both theory and the empirically measured change in the center of bias margins for the tested digital circuits.

quant-pharXiv:2512.06895•IEEE Transactions on Applied Superconductivity•Dec 9, 2025•3 citations
Standard quantum architectures rely on dilution refrigeration to suppress thermal noise, tethering the industry to a non-scalable 20 mK thermal floor. The cooling power at millikelvin temperatures scales poorly, creating a “mainframe constraint” that limits widespread deployment. Here, a 4-Kelvin topological processor is proposed, utilizing twistronic symmetry breaking in Bi-2212 to engineer a 25 meV spectral gap. By integrating this intrinsic protection with RSFQ control logic and pulse tube cryogenics via a flip-chip architecture, a stability margin of Γ≈20\Gamma \approx 20Γ≈20 is achieved even with interface losses. This architecture eliminates the need for dilution refrigeration, enabling scalable, rack-mounted quantum processing.
Standard superconducting quantum processors are currently constrained by the thermodynamic bottleneck of millikelvin dilution refrigeration, which precludes the integration of high-speed control logic and limits scalability. This reliance on the 20 mK regime creates a “mainframe constraint” where the cooling infrastructure scales non-linearly with computational volume. Here, a 4-Kelvin topological processor architecture is introduced, utilizing twistronic Bi-2212 heterostructures with a 30 meV spectral gap. By engineering a time-reversal symmetry broken state at a 45-degree twist angle, a “thermal firewall” is established that suppresses decoherence (Γ≈80\Gamma \approx 80Γ≈80) at temperatures accessible to industrial pulse tube cryocoolers. This architecture enables the co-location of energy-efficient RSFQ control logic with the quantum plane, redefining the system as a portable, deployable technology.
Current quantum computing architectures face a thermodynamic bottleneck where the energy cost of classical error correction scales superlinearly with system size. Reliance on dilution refrigeration and active syndrome extraction imposes a latency penalty that renders hybrid paradigms unscalable for exascale applications. An architecture for Chiral High-Temperature Topological Processing (CHTP) is defined to leverage spontaneous symmetry breaking in twisted bilayers. Engineering a 45-degree twist between d-wave layers induces a chiral d+idd+idd+id order parameter with a 25 meV spectral gap. This intrinsic thermodynamic protection suppresses thermal errors by a factor of e−70e^{-70}e−70 at 4 Kelvin. Monolithic integration of Rapid Single Flux Quantum (RSFQ) logic eliminates the input-output latency bottleneck inherent in room-temperature control. This framework establishes a rigorous blueprint for rack-mountable quantum hardware compatible with industrial Pulse Tube cryogenics.
A quantum processing system for high-temperature topological quantum computing comprises a Cryogenic Enclosure operating at approximately 4 Kelvin. The system houses a Quantum Processor Module with a twisted bilayer high-temperature superconductor structure. This structure induces a chiral topological phase, hosting robust Majorana Zero Modes that serve as logical qubits. A Control Layer with YBCO-based Rapid Single Flux Quantum (RSFQ) Logic Circuits is monolithically integrated to perform braiding operations and readout, providing intrinsic error suppression through a large superconducting gap. This architecture eliminates the need for dilution refrigeration, enabling compact, industrially viable, and intrinsically fault-tolerant quantum processing.
Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.
The superconducting quantum computer with strong data storage capability and fast execution speed has attracted a lot of attention in recent years and is finding practical applications in fields such as finance, military, biomedicine, and artificial intelligence. To suppress the thermal noise and to achieve high coherence, the quantum chips require millikelvin temperature, which poses a significant challenge for the suitable cryogenic system. The dilution refrigerator (DR) with ultra-low vibration and electromagnetic interference becomes an appropriate candidate for this purpose. To achieve the aimed millikelvin temperature, a cryogen-free DR composed of a Gifford-McMahon type pulse tube refrigerator (GM-type PTR), Joule-Thompson refrigerator (JTR), and dilution unit is investigated. This article presents the structural design of the DR and the coupling system with superconducting quantum chips. The cooling performance of the designed DR is estimated based on the developed cryogenic system. The minimum deduced temperature of 0.76 K in the still is achieved and the next steps to obtain the final temperature of 5 mK are underway.
As quantum computing processors increase in size, there is growing interest in developing cryogenic electronics to overcome significant challenges to system scaling. Single flux-quantum (SFQ) circuits offer a promising alternative to remote, bulky, and power-hungry room temperature electronics. To meet the need for digital qubit control, readout, and co-processing, SFQ circuits must be adapted to operate at millikelvin temperatures near quantum processors. SEEQC's SFQuClass digital quantum management approach proximally places energy-efficient SFQ (ERSFQ) circuits and qubits in a multi-chip module. This enables extremely low power dissipation, compatible with a typical dilution cryostat's limited cooling power, while maintaining high processing speed and low error rates. We report on systematic testing from 4 K to 10 mK of a comprehensive set of ERSFQ cells, as well as more complex circuits such as programmable counters and demultiplexers used in digital qubit control. We compare the operating margins and error rates of these circuits and find that, at millikelvin, bias margins decrease and the center of the margins (i.e., the optimal bias current value) increases by ~15%, compared to 4.2 K. The margins can be restored by thermal annealing by reducing Josephson junction (JJ) critical current Ic. To provide guidance for how circuit parameters vary from 4.2 K to millikelvin, relevant analog process control monitors (PCMs) were tested in the temperature range of interest. The measured JJ critical current (of the PCM JJ arrays) increases by ~15% when decreasing temperature from 4.2 K to millikelvin, in good agreement with both theory and the empirically measured change in the center of bias margins for the tested digital circuits.