Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Pitkän koherenssiajan kubittien suunnittelu ja mallinnus käyttäen sähkömagneettisen energian jakautumismallia

Savola, Niko

Published May 16, 2023• 0 citations
OpenAlex

Abstract

Quantum computers are devices that use quantum phenomena for information processing, with the advantage of solving specific problems faster than classical computers. Superconducting circuits with Josephson junctions have emerged as one of the most promising platforms for large-scale quantum computing in the last decade. However, in the current noisy intermediate-scale quantum era, circuits and algorithms suffer from low fidelities and limited amount of superconducting quantum bits, or qubits. Short coherence times owing to undesired transitions between the excited and ground states of a qubit, are one of the primary sources of error. This work studies the contribution of losses arising from two-level systems, localized predominantly in material interfaces, on the coherence time for conventional superconducting-qubit geometries. This is accomplished by using the method of energy participation ratios with electromagnetic finite-element-method simulations. First, we compare energy participations in two-dimensional cross-sections to those in a similar three-dimensional environment with a thin-sheet approximation for metal thickness and no modelling of lossy material interfaces. After validating the approximations, the method of energy participation ratios is further applied to analyze real-world qubit designs, demonstrating how the approach can facilitate the development of high-coherence superconducting quantum devices. Individual design parameter sweeps are also conducted to provide insight into dependencies on the geometry. We discover that the electric field is concentrated near the Josephson junction area, and the resulting participations are primarily influenced by the lengths of etched gaps between metals in a chip. A Bayesian machine-learning-based optimizer is introduced to systematically discover design geometries that improve qubit relaxation time. This approach is applied to a modified version of a common qubit geometry defined by splines. Furthermore, the workflow is implemented in KQCircuits, a GPLv3-licensed open-source layout design tool for designing state-of-the-art superconducting circuits and processors.

Related papers

Precise 2D electric field density simulations for superconducting quantum devices

Zydrunas Gimbutas, Wei-Ren Syong, Nhi Nguyen +5 more

Dielectric loss due to two-level systems is a limiting factor for superconducting qubit relaxation times. These losses arise mostly from nanometer-scale interfacial defect regions in superconducting devices with planar dimensions of microns to millimeters, thus making it resource intensive to accurately simulate the electric field density in these regions with traditional electromagnetic solvers. In this work, we demonstrate a fast boundary integral equation solver that allows precise simulation of electric field density in these thin regions, showing a speedup of around two orders of magnitude over traditional solvers, with relative errors around $10^{-7}$ for a ten-minute solution runtime. By computing participation ratios through Green's first identity without squaring the electric field, our approach is less susceptible to the field singularities near conductor corners. We apply this solver to a basic untrenched coplanar waveguide cross-section, showing that the common assumption of participation ratio linearity with dielectric constant holds well for some interfaces and not others; in particular, while the metal-air (MA) top and corner follow this linear relationship strongly, the MA sidewall does not. We then compare isotropic and anisotropic etching, showing that the MA sidewall and the metal-air-substrate triple junction are the most strongly affected. We are currently leveraging this solver to explore geometries that will uniquely isolate the participation ratios of the different dielectrics. Finally, we are working to combine this solver framework with a full 3D microwave solver to accurately calculate participation ratios for the thin dielectrics that are known sources of loss in superconducting qubits.

quant-pharXiv:2607.26242•Jul 30, 2026•1 citation

A refined 2D simulation framework: EPR optimization for superconducting qubit with process-realistic geometry

Changjuan Zhang, Benzheng Yuan, Haoran He +7 more

Abstract Energy participation ratio (EPR) at the metal-substrate (MS) interface is a dominant decoherence source limiting the coherence time ( T 1 ) of planar superconducting transmon qubits. Traditional EPR simulations rely on idealized geometric models, ignoring process-induced morphological deviations that significantly impact actual device performance. To bridge this gap, we propose a unified data-driven framework. It automatically extracts geometric parameters from SEM cross-sections using computer vision (CV). These parameters are then imported into a calibrated 2D EPR simulation model. Sobol global sensitivity analysis is further applied to quantify the influences of key parameters. Parametric simulations reveal that the EPR scaling factor F ms generally decreases with increasing interface thickness, substrate over-etch depth, and trench angle, driven by mitigated edge electric field crowding. Sobol analysis further identifies substrate over-etch depth and trench angle as the dominant drivers of F ms , with a significant synergistic interaction between these two parameters. Evaluations across eight process-feasible geometric configurations indicate that thin interface layer combined with a deep substrate over-etch yields the largest predict reduction in interface EPR, corresponding to a projected relative enhancement in T 1 under the assumption of a constant interface loss tangent. We derive actionable process guidelines for planar Al-on-Si transmon qubits, prioritizing the co-tuning of trench parameters to balance MS-interface EPR reduction with manufacturing feasibility within the investigated parameter range. This framework provides a systematic pipeline for incorporating process-induced geometric deviations into EPR prediction, and offers a design-stage simulation tool applicable to planar superconducting structures with similar coplanar edge-dominated EPR characteristics.

Superconductor Science and Technology•Jul 27, 2026•0 citations

Schaalbare Fabricage van Supergeleidende Qubits - Een Studie van Decoherentie

Van Damme, Jacques

Quantum computing aims to leverage the principles of quantum mechanics to achieve superior information processing capabilities beyond the limits of today's computers. These machines have the potential to efficiently simulate quantum mechanical systems, revolutionizing the development of new materials, drug discovery, and fundamental physics research. Additionally, algorithms such as prime factorization and unstructured data search offer significant speed-ups on quantum computers, enhancing computational capabilities beyond current limits. The first experimental demonstrations of this central idea have sparked significant excitement and expectation in society. Superconducting circuit hardware technologies, which implement quantum computers, are rapidly maturing and transitioning from physics laboratories to industrial fabrication plants. This work aims to bridge the gap between physics laboratory fabrication techniques and industrial standards. Here, the approach starts from complementary metal-oxide-semiconductor (CMOS) compatible processes, optimized using insights from the decades of laboratory development. In particular, two alternative Josephson junction (JJ) fabrication methods are explored, the overlap junction and tri-layer junction approaches, that do not rely on the standard angled evaporation and lift-off processes. These CMOS-compatible fabrication processes are benchmarked for quality and uniformity, using superconducting resonators and qubits to probe material defects and process variability. Device metrics are used to identify and optimize the most critical fabrication steps. Using these methods, a successful overlap JJ qubit fabrication flow is demonstrated with industry standard tools on 300 mm wafer scale, achieving an initial qubit yield of 98.25%. Several devices exhibit lifetimes and coherence times exceeding 100 microseconds, comparable to state-of-the-art devices. Extensive across-wafer measurements and analysis provide insights into limiting factors such as material defects at device interfaces, identifying avenues for continued improvements. The second method, the tri-layer JJ approach, has the potential for defect-free devices with CMOS-grade uniformity by growing epitaxial junctions, patterned with advanced lithography and dry-etch techniques. However, subsequent metallization steps introduce detrimental microwave losses compromising the pristine junctions. Here, a novel tri-layer qubit design is proposed, the tri-layer merged element transmon (tri-MET), which eliminates further processing beyond pristine junction deposition and patterning. The new device is demonstrated in simulation, and initial fabrication steps are presented. In summary, this thesis presents key breakthroughs in superconducting qubit fabrication methods, providing evidence for the viability of industrial methods to fabricate high-coherence superconducting qubits. Further work will focus on addressing interface defects, improving junction uniformity, and incorporating three-dimensional integration techniques to enable large-scale quantum processors for computations beyond the classical limits.

•May 26, 2025•0 citations

SesQ: A Surface Electrostatic Simulator for Precise Energy Participation Ratio Simulation in Superconducting Qubits

Ziang Wang, Shuyuan Guan, Feng Wu +6 more

An accurate and efficient numerical electromagnetic model for superconducting qubits is essential for characterizing and minimizing design-dependent dielectric losses. The energy participation ratio (EPR) is the commonly adopted metric used to evaluate these losses, but its calculation presents a severe multiscale computational challenge. Conventional finite element method (FEM) requires 3D volumetric meshing, leading to prohibitive computational costs and memory requirements when attempting to capture singular electric fields at nanometer-thin material interfaces. To address this bottleneck, we propose SesQ, a surface integral equation simulator tailored for the precise simulation of the EPR. By applying discretization on 2D surfaces, deriving a semi-analytical multilayer Green's function, and employing a dedicated non-conformal boundary mesh refinement scheme, SesQ accurately resolves singular edge fields without an explosive growth in the number of unknowns. Validations with analytically solvable models demonstrate that SesQ accelerates capacitance extraction by roughly two orders of magnitude compared to commercial FEM tools. While achieving comparable accuracy for capacitance extraction, SesQ delivers superior precision for EPR calculation. Simulations of practical transmon qubits further reveal that FEM approaches tend to significantly underestimate the EPR. Finally, the high efficiency of SesQ enables rapid iteration in the layout optimization, as demonstrated by minimizing the EPR of the qubit pattern, establishing the simulator as a powerful tool for the automated design of low-loss superconducting quantum circuits.

quant-pharXiv:2603.28524•Mar 31, 2026•1 citation

End-to-End Design Flow for 4-Qubit Superconducting Quantum Chip with Alternative Coupling Architectures

Fahim Shahriar Anim, Md. Saifur Rahman

Quantum computing is advancing rapidly, with superconducting quantum computing (SQC) emerging as one of the most promising platforms for scalable quantum information processing. In contrast to fabrication-focused approaches prevalent in current literature, this work presents a fully simulation-based design and tuning methodology for a small-scale superconducting quantum chip - addressing practical limitations posed by fabrication resource constraints - and consequently excludes physical chip fabrication or real-time performance evaluation (e.g., fidelity and error rate measurements). A meticulous, step-by-step electromagnetic simulation was conducted on the chip, designed using Qiskit Metal and Ansys Electronics, with qubit parameters tuned and verified using the Lumped Oscillator Model (LOM) and Energy Participation Ratio (EPR) methods. The design achieves good parameter convergence with relative tuning error rates (Δ%) below 0.05% after 15 adaptive passes and approximately 50,000 solved mesh elements, yielding an Energy Participation Ratio (EPR) of 91.8 % for the chip substrate (Silicon). Furthermore, the study includes a theoretical comparison between two fundamental qubit-qubit coupling schemes. A key contribution of this work lies in systematically analyzing how geometric variations in qubit design affect critical quantum parameters such as qubit frequencies, anharmonicities, coupling strengths, and dispersive shifts - thereby offering a comprehen-sive, simulation-driven framework for early-stage quantum chip prototyping.

IEEE International Conference on Quantum Photonics, Artificial Intelligence & Networking (QPAIN)•Jul 31, 2025•1 citation

Materials in superconducting quantum circuits

Kanglin Xiong, Jiagui Feng, Yarui Zheng +5 more

Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.

Chinese Science Bulletin (Chinese Version)•Jul 20, 2021•9 citations
Quantum computers are devices that use quantum phenomena for information processing, with the advantage of solving specific problems faster than classical computers. Superconducting circuits with Josephson junctions have emerged as one of the most promising platforms for large-scale quantum computing in the last decade. However, in the current noisy intermediate-scale quantum era, circuits and algorithms suffer from low fidelities and limited amount of superconducting quantum bits, or qubits. Short coherence times owing to undesired transitions between the excited and ground states of a qubit, are one of the primary sources of error. This work studies the contribution of losses arising from two-level systems, localized predominantly in material interfaces, on the coherence time for conventional superconducting-qubit geometries. This is accomplished by using the method of energy participation ratios with electromagnetic finite-element-method simulations. First, we compare energy participations in two-dimensional cross-sections to those in a similar three-dimensional environment with a thin-sheet approximation for metal thickness and no modelling of lossy material interfaces. After validating the approximations, the method of energy participation ratios is further applied to analyze real-world qubit designs, demonstrating how the approach can facilitate the development of high-coherence superconducting quantum devices. Individual design parameter sweeps are also conducted to provide insight into dependencies on the geometry. We discover that the electric field is concentrated near the Josephson junction area, and the resulting participations are primarily influenced by the lengths of etched gaps between metals in a chip. A Bayesian machine-learning-based optimizer is introduced to systematically discover design geometries that improve qubit relaxation time. This approach is applied to a modified version of a common qubit geometry defined by splines. Furthermore, the workflow is implemented in KQCircuits, a GPLv3-licensed open-source layout design tool for designing state-of-the-art superconducting circuits and processors.
Dielectric loss due to two-level systems is a limiting factor for superconducting qubit relaxation times. These losses arise mostly from nanometer-scale interfacial defect regions in superconducting devices with planar dimensions of microns to millimeters, thus making it resource intensive to accurately simulate the electric field density in these regions with traditional electromagnetic solvers. In this work, we demonstrate a fast boundary integral equation solver that allows precise simulation of electric field density in these thin regions, showing a speedup of around two orders of magnitude over traditional solvers, with relative errors around 10−710^{-7}10−7 for a ten-minute solution runtime. By computing participation ratios through Green's first identity without squaring the electric field, our approach is less susceptible to the field singularities near conductor corners. We apply this solver to a basic untrenched coplanar waveguide cross-section, showing that the common assumption of participation ratio linearity with dielectric constant holds well for some interfaces and not others; in particular, while the metal-air (MA) top and corner follow this linear relationship strongly, the MA sidewall does not. We then compare isotropic and anisotropic etching, showing that the MA sidewall and the metal-air-substrate triple junction are the most strongly affected. We are currently leveraging this solver to explore geometries that will uniquely isolate the participation ratios of the different dielectrics. Finally, we are working to combine this solver framework with a full 3D microwave solver to accurately calculate participation ratios for the thin dielectrics that are known sources of loss in superconducting qubits.
Abstract Energy participation ratio (EPR) at the metal-substrate (MS) interface is a dominant decoherence source limiting the coherence time ( T 1 ) of planar superconducting transmon qubits. Traditional EPR simulations rely on idealized geometric models, ignoring process-induced morphological deviations that significantly impact actual device performance. To bridge this gap, we propose a unified data-driven framework. It automatically extracts geometric parameters from SEM cross-sections using computer vision (CV). These parameters are then imported into a calibrated 2D EPR simulation model. Sobol global sensitivity analysis is further applied to quantify the influences of key parameters. Parametric simulations reveal that the EPR scaling factor F ms generally decreases with increasing interface thickness, substrate over-etch depth, and trench angle, driven by mitigated edge electric field crowding. Sobol analysis further identifies substrate over-etch depth and trench angle as the dominant drivers of F ms , with a significant synergistic interaction between these two parameters. Evaluations across eight process-feasible geometric configurations indicate that thin interface layer combined with a deep substrate over-etch yields the largest predict reduction in interface EPR, corresponding to a projected relative enhancement in T 1 under the assumption of a constant interface loss tangent. We derive actionable process guidelines for planar Al-on-Si transmon qubits, prioritizing the co-tuning of trench parameters to balance MS-interface EPR reduction with manufacturing feasibility within the investigated parameter range. This framework provides a systematic pipeline for incorporating process-induced geometric deviations into EPR prediction, and offers a design-stage simulation tool applicable to planar superconducting structures with similar coplanar edge-dominated EPR characteristics.
Quantum computing aims to leverage the principles of quantum mechanics to achieve superior information processing capabilities beyond the limits of today's computers. These machines have the potential to efficiently simulate quantum mechanical systems, revolutionizing the development of new materials, drug discovery, and fundamental physics research. Additionally, algorithms such as prime factorization and unstructured data search offer significant speed-ups on quantum computers, enhancing computational capabilities beyond current limits. The first experimental demonstrations of this central idea have sparked significant excitement and expectation in society. Superconducting circuit hardware technologies, which implement quantum computers, are rapidly maturing and transitioning from physics laboratories to industrial fabrication plants. This work aims to bridge the gap between physics laboratory fabrication techniques and industrial standards. Here, the approach starts from complementary metal-oxide-semiconductor (CMOS) compatible processes, optimized using insights from the decades of laboratory development. In particular, two alternative Josephson junction (JJ) fabrication methods are explored, the overlap junction and tri-layer junction approaches, that do not rely on the standard angled evaporation and lift-off processes. These CMOS-compatible fabrication processes are benchmarked for quality and uniformity, using superconducting resonators and qubits to probe material defects and process variability. Device metrics are used to identify and optimize the most critical fabrication steps. Using these methods, a successful overlap JJ qubit fabrication flow is demonstrated with industry standard tools on 300 mm wafer scale, achieving an initial qubit yield of 98.25%. Several devices exhibit lifetimes and coherence times exceeding 100 microseconds, comparable to state-of-the-art devices. Extensive across-wafer measurements and analysis provide insights into limiting factors such as material defects at device interfaces, identifying avenues for continued improvements. The second method, the tri-layer JJ approach, has the potential for defect-free devices with CMOS-grade uniformity by growing epitaxial junctions, patterned with advanced lithography and dry-etch techniques. However, subsequent metallization steps introduce detrimental microwave losses compromising the pristine junctions. Here, a novel tri-layer qubit design is proposed, the tri-layer merged element transmon (tri-MET), which eliminates further processing beyond pristine junction deposition and patterning. The new device is demonstrated in simulation, and initial fabrication steps are presented. In summary, this thesis presents key breakthroughs in superconducting qubit fabrication methods, providing evidence for the viability of industrial methods to fabricate high-coherence superconducting qubits. Further work will focus on addressing interface defects, improving junction uniformity, and incorporating three-dimensional integration techniques to enable large-scale quantum processors for computations beyond the classical limits.
An accurate and efficient numerical electromagnetic model for superconducting qubits is essential for characterizing and minimizing design-dependent dielectric losses. The energy participation ratio (EPR) is the commonly adopted metric used to evaluate these losses, but its calculation presents a severe multiscale computational challenge. Conventional finite element method (FEM) requires 3D volumetric meshing, leading to prohibitive computational costs and memory requirements when attempting to capture singular electric fields at nanometer-thin material interfaces. To address this bottleneck, we propose SesQ, a surface integral equation simulator tailored for the precise simulation of the EPR. By applying discretization on 2D surfaces, deriving a semi-analytical multilayer Green's function, and employing a dedicated non-conformal boundary mesh refinement scheme, SesQ accurately resolves singular edge fields without an explosive growth in the number of unknowns. Validations with analytically solvable models demonstrate that SesQ accelerates capacitance extraction by roughly two orders of magnitude compared to commercial FEM tools. While achieving comparable accuracy for capacitance extraction, SesQ delivers superior precision for EPR calculation. Simulations of practical transmon qubits further reveal that FEM approaches tend to significantly underestimate the EPR. Finally, the high efficiency of SesQ enables rapid iteration in the layout optimization, as demonstrated by minimizing the EPR of the qubit pattern, establishing the simulator as a powerful tool for the automated design of low-loss superconducting quantum circuits.
Quantum computing is advancing rapidly, with superconducting quantum computing (SQC) emerging as one of the most promising platforms for scalable quantum information processing. In contrast to fabrication-focused approaches prevalent in current literature, this work presents a fully simulation-based design and tuning methodology for a small-scale superconducting quantum chip - addressing practical limitations posed by fabrication resource constraints - and consequently excludes physical chip fabrication or real-time performance evaluation (e.g., fidelity and error rate measurements). A meticulous, step-by-step electromagnetic simulation was conducted on the chip, designed using Qiskit Metal and Ansys Electronics, with qubit parameters tuned and verified using the Lumped Oscillator Model (LOM) and Energy Participation Ratio (EPR) methods. The design achieves good parameter convergence with relative tuning error rates (Δ%) below 0.05% after 15 adaptive passes and approximately 50,000 solved mesh elements, yielding an Energy Participation Ratio (EPR) of 91.8 % for the chip substrate (Silicon). Furthermore, the study includes a theoretical comparison between two fundamental qubit-qubit coupling schemes. A key contribution of this work lies in systematically analyzing how geometric variations in qubit design affect critical quantum parameters such as qubit frequencies, anharmonicities, coupling strengths, and dispersive shifts - thereby offering a comprehen-sive, simulation-driven framework for early-stage quantum chip prototyping.
Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.