We describe some characterization methods for the determination of qualitative parameters of superconducting Josephson effect devices. We propose the introduction of a new method to characterize the junctions at the ambient temperature. This method accounts the effects of the single electron tunneling. We also used SEM techniques for technological analysis of the devices.
We describe some characterization methods for the determination of qualitative parameters of superconducting Josephson effect devices. We propose the introduction of a new method to characterize the junctions at the ambient temperature. This method accounts the effects of the single electron tunneling. We also used SEM techniques for technological analysis of the devices.
The concept of quantum-mechanical tunneling of a particle through a potential barrier was known already in the 1920s. The discovery of tunneling of electron pairs across a superconductor–insulator–superconductor (SIS) junction was made by Josephson in 1962 and experimentally confirmed first by Anderson and Rowell in 1963. The phenomenon of that the electron-pair tunneling may produce a dissipationless current which may flow at zero bias voltage opened not only a new chapter in solid-state physics, but also provided a wide variety of stimulating applications. In this chapter, we introduce the phenomenology of the Josephson effect, formulate the electrodynamics of the Josephson junctions, and outline some circuits of practical interest. Some electrodynamic analyses are given to superconducting quantum interference devices (SQUIDs). A brief discussion about the possible use of SQUIDs and about the physical limits of various switching technologies in comparison with the superconducting electronic technology is also provided at the end of this chapter.
This work is devoted to the study of tunnel Josephson superconductor-insulator-superconductor (SIS) junctions with a new type of shunting based on the usage of an additional superconductor-insulator-normal metal (NIS) junction located around the SIS junction. Numerical calculations of the parameters of such shunted junctions were carried out and modeling of their IVC (current-voltage characteristics) was performed. The designed samples were manufactured, their parameters were studied. To investigate the behavior of junctions under the influence of high-frequency signals in the sub-THz range, their IVCs were measured. Keywords: Superconducting devices, superconductor-insulator-superconductor tunnel junction, Josephson effect, shunting of Josephson junctions.
This thesis presents results focused on fabrication and electrical characterization of superconducting tunnel junctions and Josephson junctions, e.g. measuring the current–voltage response and 1/f noise from different samples at different temperatures. Junctions were fabricated inside a vacuum chamber where metal evaporation through a resist mask was used to create submicron-sized junctions. The tunneling barrier was common between all different samples, i.e. in-situ oxidized aluminium between the metal depositions. Different material combinations were used, e.g. Al–AlOₓ–Al, Al–AlOₓ–Al:Mn and Al–AlOₓ–Nb. The manganese doping in aluminium (Al:Mn) suppresses the superconductivity making the Al:Mn parts normal, while pure aluminium is superconducting, creating a normal metal–insulator–superconductor (NIS) device. The qualities of junctions were improved, if possible, by vacuum thermal annealing at 400 °C, which was found both to stabilize aluminium and aluminium–manganese based junctions and to reduce the characteristic 1/f noise in them. These results are desired, since for most applications it is important to have a junction with stable parameters over long time and 1/f noise is limiting the sensitivity of many devices. However, the procedure is not for granted, since most other NIS material combinations didn't survive the annealing treatment. We studied Al–AlOₓ–Nb junctions at cryogenic temperatures (≈ 100 mK) either as an SIS' device, or as an NIS device by suppressing the superconductivity of aluminium with magnetic field, and observed excess sub-gap current, which could not be explained by standard tunneling theory with the Dynes model.
Charge states in mesoscopic Josephson devices are considered promising candidates for a solid-state implementation of quantum computing. We studied three superconducting single electron transistors (SSETs) fabricated with small Al/AlO x /Al tunnel junctions, which, with a different choice of the construction parameters, can realize both the quantum bit and the readout system for the qubit charge state. We varied the junction capacitance and barrier transparency, making the Josephson energy E J of the device smaller, comparable and larger than the charging energy E C : the first case is suitable to build the qubit, while the latter can be suitable for the qubit readout.
We present a systematic study of the temperature-dependent transport properties of Nb- and Al-based superconductor--insulator--thin superconductor--ferromagnet--superconductor (SIsFS) Josephson junctions. By varying the superconducting material and the thickness of the intermediate superconducting layer, we identify three distinct transport regimes: a tunnel-dominated SIS-like regime, a temperature-driven crossover, and a complex weak-link regime. A unified Usadel-based description connects these regimes through the self-consistent pair potential of the intermediate s-layer. While for Al-based devices an SIS-like transport regime is observed, a self-consistent calculation of the s/F/S proximity electrode, combined with perturbative tunnel coupling to the outer electrode, accounts for Nb devices with different thickness of the superconducting interlayer. The calculation places the 10-nm-interlayer sample in a proximity-supported, strongly suppressed s state, close to the SInFS limit in which the interlayer is effectively driven normal (\textit{n}). A reduced nonlinear long-junction description captures the same limiting physics. The evolution of I_cR_N(T) thereby provides a direct experimental signature of the three transport regimes. Beyond the fundamental interest, the results establish practical design guidelines: Nb junctions with sufficiently thick s interlayers are well suited for high-speed cryogenic memory elements and tunable superconducting parametric amplifiers, while Al junctions are natural candidates for coherent superconducting quantum circuits
Josephson junctions epitomize one of the most profound macroscopic quantum aspects of superconductivity, while at the same time enabling a wider range of applications than any other devices of superconducting electronics. In the past two decades, ferromagnetic barriers further enriched the junctions' physical properties range and promise application of junctions with such barriers in superconducting memories and quantum computing. All of the devices described in this section employ the Josephson effects and many also rely on combining this macroscopic quantum property with another fundamental quantum principle exemplified in superconductors, that is magnetic flux quantization. The first is superconducting logic gates which have been realized in a number of different forms, the front runner for widespread application at the time of writing being single flux quantum logic in several energy-efficient variants. The second major application device which combines both Josephson effects and flux quantization is the SQUID.