Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Engineering Various Components of a Magneto-Optical Trap and Simulation of Ultracold Atoms in a Harmonic Potential for the Formation of Bose-Einstein Condensate

Rahul Das (22607879)

Published Nov 12, 2025• 0 citations
Publisher

Abstract

This work presents the designing various components of a Magneto-Optical Trap and simulations of ultracold lithium atoms. Key experimental components include a magnetic-field compensator, and RF antenna integrated with a Python-based GUI control system. Complementary simulations model atom dynamics in a harmonic potential and cloud evolution under quenches, outlining pathways toward achieving a Bose–Einstein condensate. Together, these results demonstrate improved stability and efficiency in ultracold atom control.

DOI
10.6084/m9.figshare.30602192.v1

Related papers

Realization of Bose-Einstein condensation with Lithium-7 atoms

Yichao Yu

This thesis presents our work on developing and improving the techniques of trapping and cooling an ultra-cold cloud of Lithium-7 atoms and the realization of the Bose- Einstein condensate as a first step to study quantum magnetism in optical lattice. The techniques used in this experiment include Zeeman slowing, magneto-optical trapping (MOT), gray molasses, static magnetic trapping, evaporative cooling, optical dipole trapping (ODT), etc. The apparatus has the capability of creating a Bose-Einstein condensate with almost 106 atoms in 10 seconds as well as tuning the interaction between atoms in a BEC using the Feshbach resonance with a magnetic bias field of up to ~~ 1000G.

•Jan 1, 2014•0 citations

An apparatus for the production of Bose-Einstein condensates in tunable geometries on a chip

Thomas J. Barrett

Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with $10^5$ atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.

•Jul 12, 2017•0 citations

Design, construction, and performance towards a versatile 87Rb and 41K BEC apparatus

Nicholas McKay Parry

The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.

•Aug 16, 2016•1 citation

Ultracold rubidium atoms in periodic potentials

Robert Saers

This thesis includes both experimental and theoretical investigations, presented in a series of eight papers. The experimental part ranges from the construction procedures of an apparatus for Bose-Einstein condensates, to full scale experiments using three different set-ups for ultracold atoms in optical lattices. As one of the main themes of the thesis, an experimental apparatus for production of Bose-Einstein Condensates is under construction. A magneto-optically trapped sample, hosting more than 200 million 87Rb atoms, have successfully been loaded into a magnetic trap with high transfer rate. The lifetime of the sample in the magnetic trap is in the range of 9 s, and the atoms have been shown to respond to evaporative cooling. The experiment is ready for optimization of the magnetic trap loading, and evaporative cooling parameters, which are the final steps for reaching Bose-Einstein condensation. The set-up is designed to host experiments including variable geometry optical lattices, and includes the possibility to align laser beams with high angular precision for this purpose. The breakdown of Bloch waves in a Bose-Einstein condensate is studied, attributed to the effect of energetic and dynamical instability. This experimental study is performed using a Bose-Einstein condensate in a moving one-dimensional optical lattice at LENS, Florence Italy. The optical lattice parameters, and the thermal distribution of the atomic sample required to trigger the instabilities, are detected, and compared with a theoretical model developed in parallel with the experiments. In close connection with these one-dimensional lattice studies, an experimental survey to characterize regimes of superradiant Rayleigh scattering and Bragg scattering is presented. Tunneling properties of repulsively bound atom pairs in double well potentials are characterized in an experiment at Johannes Gutenberg University, Mainz Germany. A three-dimensional optical lattice, producing an array of double wells with tunable properties is let to interact with a Bose-Einstein condensate. Pairs of ultracold atoms are produced on one side in the double wells, and their tunneling behavior, dependent on potential barrier and repulsion properties, is studied. A theoretical study of the crossover between one- and two-dimensional systems has been performed. The simulations were made for a two-dimensional array of atoms, where the behavior for different tunneling probabilities and atom-atom repulsion strengths was studied. Scaling relations for systems of variable sizes have been examined in detail, and numerical values for the involved variables have been found.

•Jan 1, 2008•0 citations

Bose-Einstein Condensation in a Ioffe-Pritchard trap

U. Ernst, Andreas Marte, Florian Schreck +2 more

Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.

European Quantum Electronics Conference (EQEC)•Aug 24, 2005•0 citations

Rapid production of R87b Bose-Einstein condensates in a combined magnetic and optical potential

Y.-J. Lin, Abigail R. Perry, R. L. Compton +2 more

We describe an apparatus for quickly and simply producing $^{87}\text{R}\text{b}$ Bose-Einstein condensates. It is based on a magnetic quadrupole trap and a red-detuned optical dipole trap. We collect atoms in a magneto-optical trap (MOT) and then capture the atoms in a magnetic quadrupole trap and force rf evaporation. We then transfer the resulting cold dense cloud into a spatially mode-matched optical dipole trap by lowering the quadrupole field gradient to below gravity. This technique combines the efficient capture of atoms from a MOT into a magnetic trap with the rapid evaporation of optical dipole traps; the approach is insensitive to the peak quadrupole gradient and the precise trapping beam waist. Our system reliably produces a condensate with $N\ensuremath{\approx}2\ifmmode\times\else\texttimes\fi{}{10}^{6}$ atoms every 16 s.

arXiv:0904.3314•Physical Review A•Jun 29, 2009•217 citations
This work presents the designing various components of a Magneto-Optical Trap and simulations of ultracold lithium atoms. Key experimental components include a magnetic-field compensator, and RF antenna integrated with a Python-based GUI control system. Complementary simulations model atom dynamics in a harmonic potential and cloud evolution under quenches, outlining pathways toward achieving a Bose–Einstein condensate. Together, these results demonstrate improved stability and efficiency in ultracold atom control.
This thesis presents our work on developing and improving the techniques of trapping and cooling an ultra-cold cloud of Lithium-7 atoms and the realization of the Bose- Einstein condensate as a first step to study quantum magnetism in optical lattice. The techniques used in this experiment include Zeeman slowing, magneto-optical trapping (MOT), gray molasses, static magnetic trapping, evaporative cooling, optical dipole trapping (ODT), etc. The apparatus has the capability of creating a Bose-Einstein condensate with almost 106 atoms in 10 seconds as well as tuning the interaction between atoms in a BEC using the Feshbach resonance with a magnetic bias field of up to ~~ 1000G.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 10510^5105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
This thesis includes both experimental and theoretical investigations, presented in a series of eight papers. The experimental part ranges from the construction procedures of an apparatus for Bose-Einstein condensates, to full scale experiments using three different set-ups for ultracold atoms in optical lattices. As one of the main themes of the thesis, an experimental apparatus for production of Bose-Einstein Condensates is under construction. A magneto-optically trapped sample, hosting more than 200 million 87Rb atoms, have successfully been loaded into a magnetic trap with high transfer rate. The lifetime of the sample in the magnetic trap is in the range of 9 s, and the atoms have been shown to respond to evaporative cooling. The experiment is ready for optimization of the magnetic trap loading, and evaporative cooling parameters, which are the final steps for reaching Bose-Einstein condensation. The set-up is designed to host experiments including variable geometry optical lattices, and includes the possibility to align laser beams with high angular precision for this purpose. The breakdown of Bloch waves in a Bose-Einstein condensate is studied, attributed to the effect of energetic and dynamical instability. This experimental study is performed using a Bose-Einstein condensate in a moving one-dimensional optical lattice at LENS, Florence Italy. The optical lattice parameters, and the thermal distribution of the atomic sample required to trigger the instabilities, are detected, and compared with a theoretical model developed in parallel with the experiments. In close connection with these one-dimensional lattice studies, an experimental survey to characterize regimes of superradiant Rayleigh scattering and Bragg scattering is presented. Tunneling properties of repulsively bound atom pairs in double well potentials are characterized in an experiment at Johannes Gutenberg University, Mainz Germany. A three-dimensional optical lattice, producing an array of double wells with tunable properties is let to interact with a Bose-Einstein condensate. Pairs of ultracold atoms are produced on one side in the double wells, and their tunneling behavior, dependent on potential barrier and repulsion properties, is studied. A theoretical study of the crossover between one- and two-dimensional systems has been performed. The simulations were made for a two-dimensional array of atoms, where the behavior for different tunneling probabilities and atom-atom repulsion strengths was studied. Scaling relations for systems of variable sizes have been examined in detail, and numerical values for the involved variables have been found.
Since its first observation in 1995, Bose-Einstein condensation (BEC) experiments in dilute gases have been performed with only a few different kinds of magnetic traps. We have performed a BEC experiment with /sup 87/Rb atoms in a Ioffe-Pritchard magnetic potential, which opens up the possibility to study, e.g., Bose-Einstein condensates released in only one dimension. Our trap consists of a clip-like coil, which generates a pure two-dimensional (2D) quadrupole field for radial confinement. The axial confinement is provided by two plane pinch coils inside the clip-coil. These two coils create a bottle field. Two additional Helmholtz coils on the same symmetry axis are used to compensate the homogeneous part of the bottle field. By continuously varying the currents through the coils, the trapping potential can be changed from a 3D spherical harmonic to a 2D linear potential. The change can be done adiabatically or nonadiabatically by switching off the axial confinement slowly, or instantaneously respectively. This opens up the possibility to study 1D nonlinear atom optics. In combination with, e.g., far detuned light sheets, a Fabry-Perot type interferometer for a condensate might be realizable. Our experiments are performed in a vacuum system with two magneto-optical traps, which serves as the source of cold atoms for the magnetic trap. 10/sup 9/ atoms are captured in less than one minute. RF-induced evaporative cooling is used to increase the phase space density of the trapped atomic cloud. The BEC phase transition occurs at a temperature of 550 nK with 10/sup 6/ particles in the trap. Pure condensates with more than 10/sup 5/ atoms were produced.
We describe an apparatus for quickly and simply producing 87Rb^{87}\text{R}\text{b}87Rb Bose-Einstein condensates. It is based on a magnetic quadrupole trap and a red-detuned optical dipole trap. We collect atoms in a magneto-optical trap (MOT) and then capture the atoms in a magnetic quadrupole trap and force rf evaporation. We then transfer the resulting cold dense cloud into a spatially mode-matched optical dipole trap by lowering the quadrupole field gradient to below gravity. This technique combines the efficient capture of atoms from a MOT into a magnetic trap with the rapid evaporation of optical dipole traps; the approach is insensitive to the peak quadrupole gradient and the precise trapping beam waist. Our system reliably produces a condensate with $N\ensuremath{\approx}2\ifmmode\times\else\texttimes\fi{}{10}^{6}$ atoms every 16 s.