Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

EAGLE-1: Qualification, Calibration, and Testing of the Transmitter Subsystem for Europe’s First Autonomous QKD System

Heirich, Oliver, Calistro Rivera, Gabriela, Eppinger, Jakob, Ferenczi, Agnes, Garbagnati, Elisa, Kleinpaß, Philipp, Lützen, Pia, Moll, Florian, Rosano Nonay, Jorge, Roubal, Christian, Wagner, Matthias, Zeihsel, Hannes, Fuchs, Christian

Published Sep 29, 2025• 0 citations
OpenAlex

Abstract

The EAGLE-1 mission aims to deliver Europe’s first autonomous space based quantum key distribution (QKD) system launching the EAGLE-1 satellite in 2026. A key element of this demonstration mission is the development and space qualification of a QKD transmitter, essential for enabling secure quantum communications. This paper presents the subsystem-level design, component qualification, system calibration, and functional testing of the QKD transmitter developed by the Institute of Communications and Navigation (KN) of the German Aerospace Center (DLR). The QKD transmitter is responsible for converting quantum key information into an optical signal for transmission to ground. The quantum key and QKD protocol is based on a quantum random number generator (QRNG) and the key bits are encoded in single photons. The transmitter hardware consists of various electrical and optical components, including modulators, attenuators, amplifiers, and passive elements. We discuss component selection criteria, as well as vibration and shock testing to verify launch resilience and thermal vacuum testing to assess operational stability under space conditions. One of the key challenges is the time and bias drift of critical components, which occurs after system boot-up and varies with temperature and time. These drifts directly affect the timing, amplitude, and phase of the optical signal, impacting overall QKD performance. We present the design of the calibration methodologies which ensure autonomous calibration of the transmitter in orbit, which provides the system stability required to adhere to the QKD protocol requirements. Finally, we describe the laboratory tests assessing quantum bit error rates (QBER).

Related papers

Building Europe's first space-based Quantum Key Distribution system -- The German Aerospace Center's role in the EAGLE-1 mission

Calistro-Rivera, Gabriela, Heirich, Oliver, Shrestha, Amita +16 more

The EAGLE-1 mission aims to develop Europe's first sovereign, end-to-end space-based quantum key distribution (QKD) system. The mission is led by the European Space Agency (ESA) and SES in collaboration with several European National Space Agencies and private partners. The state-of-the-art QKD system will consist of a payload on board the EAGLE-1 low Earth orbit (LEO) satellite, optical ground stations, quantum operational networks, and key management system. The EAGLE-1 mission represents a major step for next-generation quantum communication infrastructures, delivering valuable technical results and mission data. The Institute of Communications and Navigation (IKN) of the German Aerospace Center (DLR) is a key partner in the EAGLE-1 mission and is involved in the research and development of elements in both space and ground segments. Here we report on the development of the QKD transmitter, a vital part of the QKD payload, and the customization of the Optical Ground Station Oberpfaffenhofen (OGS-OP) to conduct the IOT phase of EAGLE-1. For the space segment, DLR-IKN is in charge of the design of the QKD transmitter, including the development of the software and firmware. This transmitter generates quantum states which are used to implement a QKD protocol based on an optical signal, that will be transmitted to ground. For the ground segment, The OGS-OP will serve as the in-orbit testing ground station for EAGLE-1. Building upon the expertise with a range of satellites for quantum communication, as well as new implementations, OGS-OP will validate the performance of the payload, optical link and QKD system for the first time. We present the main developments of OGS-OP for the mission, which includes the implementation of an upgraded adaptive optics system to correct for atmospheric distortions and optimize the coupling of the incoming light into a single mode optical fiber.

arXiv:2412.03222•Dec 4, 2024•11 citations

QUBE Mission Update: First Year of Operation of a 3U CubeSat for Quantum-Key-Distribution Experiments

Petermann, Timon, Elsner, Lisa, Schmidt, Benedikt +25 more

The QUBE-I mission is a technology demonstrator mission for novel building-blocks for satellite-based quantum-key-distribution (QKD). The mission aims to test three highly integrated optical payloads, a quantum random number generator and two transmitters for polarization and phase encoded quantum states as a precursor mission for the first QKD demonstration from a CubeSat. The QKD sources are connected to, and are integrated together with the Optical Space Infrared Downlink System (OSIRIS) for QUBE (O4Q) in a 3U CubeSat. One of the mission's primary challenges is achieving a precise and accurate pointing of the O4Q with an error margin of less than 1° towards the optical ground station (OGS). Additionally, conducting the experiments presents several operational challenges, such as the need for precise orbital elements to track the satellite with the OGS and safety mechanisms to protect the Sunsensitive components of the satellite. Following the launch on 16th August 2024, we conducted an extensive commissioning phase to test all subsystems, payload components, and operational procedures. This paper provides insights and results from QUBE-I's first year in orbit, highlighting lessons learned from integrating multiple complex payload systems into a 3U CubeSat platform. Starting with communication establishment, we present the ground segment and operations capabilities. We elaborate on the use of flexible on-board scripting and recording mechanisms provided by the satellite's flight software stack for operations. An effective review, test, and deployment procedure was established to balance risk mitigation and agile operation planning. We present results of extensive tests conducted for the crucial attitude determination and control system (ADCS), including actuator verification, spin-up and detumbling tests, in-orbit sensor calibration procedures, and the evaluation of various pointing modes, such as the fine pointing mode required for the experiments. Besides that, we give insights in the actual performance of the experimental and scientific payloads after their commissioning. A big milestone marked the successful test of the operational procedure for the QKD experiments. This includes the timely provision of precise orbit determination to the OGS for tracking. In addition, the ADCS needs to prepare the fine pointing mode accordingly and the experiment needs to be started autonomously before actual contact. Flexibly selectable on-board recordings can be downloaded after the experiments for evaluation. As expected, the technical complexity of the QUBE-I mission resulted in a challenging first year of operation. With this paper, we aim to share our experiences and contribute our insights to the space community.

•Oct 4, 2025•0 citations

Link technology for all-optical satellite-based quantum key distribution system in C-/L-band

Florian Moll, Jan Krause, Nino Walenta +12 more

Satellite based quantum key distribution (QKD) enables the delivery of keys for quantum secure communications over long distances. Maturity of the technology as well as industrial interest keep increasing. So does the technology readiness of satellite free-space optical communications. A satellite QKD system comprises a quantum communication subsystem and a classical communication subsystem (public channel). Both are implemented with free-space optics. Thus, in satellite QKD system design, there are strong synergies that should be exploited as much as possible and lead to an all-optical satellite QKD system. In this paper, we present a system like this locating all optical channels in ITU DWDM C-band. We focus on the overall conceptual design and the setup of the optical channels for quantum and classical signal transmission. The system description addresses the breadboards of a transmitter laser terminal (Alice terminal), a receiver laser terminal, (Bob terminal), the public channel implementation, the interfaced QKD system and the deployed encryption system. The design basis for the Alice terminal is the laser terminal development OSIRISv3. The design basis for the Bob terminal is the ground station development THRUST. The later contains an adaptive optics correction to enable single mode fiber coupling. This enables the interfacing to almost arbitrary quantum receivers such as the Bob modules used in the described experiment. The public channel is composed of a bi-directional 1 Gbps IM/DD system and a MODEM that implements a proprietary waveform optimized for free-space channels. The system was experimentally analyzed in a field test in the framework of the German initiative QuNET which addresses the use case of quantum secure communication for authorities. The results of the experiment are used to model a feasible LEO satellite-ground link. Performance indicators such as quantum bit error rate and secure key rate of a potential mission are estimated analytically.

IEEE International Conference on Space Optical Systems and Applications (ICSOS)•Mar 28, 2022•7 citations

Characterization of QBER contributions of phase-encoding QKD transmitters with an optical coherent receiver

Pia Lützen, Philipp Kleinpaß, Innocenzo De Marco +2 more

The technological development of QKD (Quantum Key Distribution) is accelerating from a research topic towards commercial deployment. QKD initiatives are increasingly addressing real-world use cases. Besides lots of literature on theory and lab-demos, first high Technology-Readiness Level systems are available. Due to the security guarantees it has to provide, the performance of any QKD implementation is particularly sensitive to any imperfections that may lead to an increase of the QBER (Quantum Bit Error Rate). Achieving high performance, or a low QBER value, constitutes a challenging engineering task, as the operating systems need to be highly optimized in many aspects. In particular, accurate phase modulation is the foundation of high system performance in case of phase-encoding protocols. In most cases, the overall QBER is measured with a QKD receiver, which accumulates errors from transmitter, quantum channel and receiver. This requires an operational transmitter system and additionally prevents the investigation of the pure transmitter output signal’s characteristics. However, for support of transmitter integration and test activities as well as for validation tasks, a more suitable method remains to be developed. In this paper, we propose such a method by making use of a coherent receiver. This device provides extended signal information including the signal amplitude and its current relative phase. Therefore, it is possible to monitor phase-encoding correctness and precision, among other relevant signal properties. We analyze the reasonability of using a coherent receiver, by outlining its capabilites to measure QBER contributors occurring in a given basic reference QKD transmitter system. Our findings indicate that employing a coherent receiver is a simple method to accelerate development and validation of phase-encoding QKD transmitter systems.

Quantum Communications and Quantum Imaging•Oct 9, 2026•0 citations

EAGLE-1: Qualification, Calibration, and Testing of the Transmitter for Europe’s First QKD System

Oliver Heirich, Gabriela Calistro Rivera, Jakob Eppinger +10 more

IAF Space Communications and Navigation Symposium•Jan 1, 2025•0 citations

Quantum key distribution devices: How to make them and how to break them

Sarah Kaiser

As more aspects of modern society depend on digital communication, we increasingly rely on infrastructure that ensures the privacy and security of this communication. Classically, this has been provided by cryptographic protocols such as public-key encryption, in which secrets called keys are exchanged between different parties to enable secure communication. The rapid development of quantum algorithms which violate the assumptions of these protocols, however, poses a security challenge to modern cryptography. \n \nQuantum resources can also be used to strengthen cryptographic security, particularly the security of key exchange protocols. This approach, QKD, can be implemented by encoding in quantum systems such as single photons sent through free-space or a fiber. Fiber based QKD devices are already commercially available, but are fundamentally limited to distributing keys over a few hundred kilometers. To address this distance limitation, research QKD systems are being developed to exchange keys through free-space to satellites. This work considers practical challenges to building and testing both types of QKD devices. \n \nFirstly, we consider modeling and mission analysis for airborne demonstrations of QKD to stratospheric balloons and aircraft to simulate a satellite. Based on the mission parameters available for both platforms, we found aircraft platforms were more promising for testing prototype QKD satellite systems. We developed a mission planning tool to help design the flight geometries for testing the device. \n \nNext, we developed three new components for a QKD satellite prototype. The requirements for electro-optical devices in orbit are very different from lab environments, mandating new approaches to designing QKD devices. We developed a quad single photon detector package to meet the requirements for free-space links to low earth orbit. Moreover, we designed and built optical systems for analyzing the polarization of photons and an adaptive optics unit to increase the efficiency of collecting the encoded photons. All three devices were tested in conditions that simulated the time and loss of a satellite pass. \n \nFinally, we demonstrated a laser damage attack on a live commercial QKD system. Our attack injected additional optical power into the sender device to modify security-critical components. Specifically, our attack damaged the PIN diodes which monitor the encoded photon number, reducing their sensitivity or completely blinding them. Our damage could compromise the entire key, and was performed during system operation while raising no alarms. \n \nIn summary, this work shows the trade-offs of testing QKD payloads on different airborne platforms, develops components for a satellite QKD payload, and demonstrates a security vulnerability in a commercial QKD system that can fully compromise the key. These results help address practical challenges to building QKD devices, improving the security of modern cryptography.

•Aug 30, 2016•0 citations
The EAGLE-1 mission aims to deliver Europe’s first autonomous space based quantum key distribution (QKD) system launching the EAGLE-1 satellite in 2026. A key element of this demonstration mission is the development and space qualification of a QKD transmitter, essential for enabling secure quantum communications. This paper presents the subsystem-level design, component qualification, system calibration, and functional testing of the QKD transmitter developed by the Institute of Communications and Navigation (KN) of the German Aerospace Center (DLR). The QKD transmitter is responsible for converting quantum key information into an optical signal for transmission to ground. The quantum key and QKD protocol is based on a quantum random number generator (QRNG) and the key bits are encoded in single photons. The transmitter hardware consists of various electrical and optical components, including modulators, attenuators, amplifiers, and passive elements. We discuss component selection criteria, as well as vibration and shock testing to verify launch resilience and thermal vacuum testing to assess operational stability under space conditions. One of the key challenges is the time and bias drift of critical components, which occurs after system boot-up and varies with temperature and time. These drifts directly affect the timing, amplitude, and phase of the optical signal, impacting overall QKD performance. We present the design of the calibration methodologies which ensure autonomous calibration of the transmitter in orbit, which provides the system stability required to adhere to the QKD protocol requirements. Finally, we describe the laboratory tests assessing quantum bit error rates (QBER).
The EAGLE-1 mission aims to develop Europe's first sovereign, end-to-end space-based quantum key distribution (QKD) system. The mission is led by the European Space Agency (ESA) and SES in collaboration with several European National Space Agencies and private partners. The state-of-the-art QKD system will consist of a payload on board the EAGLE-1 low Earth orbit (LEO) satellite, optical ground stations, quantum operational networks, and key management system. The EAGLE-1 mission represents a major step for next-generation quantum communication infrastructures, delivering valuable technical results and mission data. The Institute of Communications and Navigation (IKN) of the German Aerospace Center (DLR) is a key partner in the EAGLE-1 mission and is involved in the research and development of elements in both space and ground segments. Here we report on the development of the QKD transmitter, a vital part of the QKD payload, and the customization of the Optical Ground Station Oberpfaffenhofen (OGS-OP) to conduct the IOT phase of EAGLE-1. For the space segment, DLR-IKN is in charge of the design of the QKD transmitter, including the development of the software and firmware. This transmitter generates quantum states which are used to implement a QKD protocol based on an optical signal, that will be transmitted to ground. For the ground segment, The OGS-OP will serve as the in-orbit testing ground station for EAGLE-1. Building upon the expertise with a range of satellites for quantum communication, as well as new implementations, OGS-OP will validate the performance of the payload, optical link and QKD system for the first time. We present the main developments of OGS-OP for the mission, which includes the implementation of an upgraded adaptive optics system to correct for atmospheric distortions and optimize the coupling of the incoming light into a single mode optical fiber.
The QUBE-I mission is a technology demonstrator mission for novel building-blocks for satellite-based quantum-key-distribution (QKD). The mission aims to test three highly integrated optical payloads, a quantum random number generator and two transmitters for polarization and phase encoded quantum states as a precursor mission for the first QKD demonstration from a CubeSat. The QKD sources are connected to, and are integrated together with the Optical Space Infrared Downlink System (OSIRIS) for QUBE (O4Q) in a 3U CubeSat. One of the mission's primary challenges is achieving a precise and accurate pointing of the O4Q with an error margin of less than 1° towards the optical ground station (OGS). Additionally, conducting the experiments presents several operational challenges, such as the need for precise orbital elements to track the satellite with the OGS and safety mechanisms to protect the Sunsensitive components of the satellite. Following the launch on 16th August 2024, we conducted an extensive commissioning phase to test all subsystems, payload components, and operational procedures. This paper provides insights and results from QUBE-I's first year in orbit, highlighting lessons learned from integrating multiple complex payload systems into a 3U CubeSat platform. Starting with communication establishment, we present the ground segment and operations capabilities. We elaborate on the use of flexible on-board scripting and recording mechanisms provided by the satellite's flight software stack for operations. An effective review, test, and deployment procedure was established to balance risk mitigation and agile operation planning. We present results of extensive tests conducted for the crucial attitude determination and control system (ADCS), including actuator verification, spin-up and detumbling tests, in-orbit sensor calibration procedures, and the evaluation of various pointing modes, such as the fine pointing mode required for the experiments. Besides that, we give insights in the actual performance of the experimental and scientific payloads after their commissioning. A big milestone marked the successful test of the operational procedure for the QKD experiments. This includes the timely provision of precise orbit determination to the OGS for tracking. In addition, the ADCS needs to prepare the fine pointing mode accordingly and the experiment needs to be started autonomously before actual contact. Flexibly selectable on-board recordings can be downloaded after the experiments for evaluation. As expected, the technical complexity of the QUBE-I mission resulted in a challenging first year of operation. With this paper, we aim to share our experiences and contribute our insights to the space community.
Satellite based quantum key distribution (QKD) enables the delivery of keys for quantum secure communications over long distances. Maturity of the technology as well as industrial interest keep increasing. So does the technology readiness of satellite free-space optical communications. A satellite QKD system comprises a quantum communication subsystem and a classical communication subsystem (public channel). Both are implemented with free-space optics. Thus, in satellite QKD system design, there are strong synergies that should be exploited as much as possible and lead to an all-optical satellite QKD system. In this paper, we present a system like this locating all optical channels in ITU DWDM C-band. We focus on the overall conceptual design and the setup of the optical channels for quantum and classical signal transmission. The system description addresses the breadboards of a transmitter laser terminal (Alice terminal), a receiver laser terminal, (Bob terminal), the public channel implementation, the interfaced QKD system and the deployed encryption system. The design basis for the Alice terminal is the laser terminal development OSIRISv3. The design basis for the Bob terminal is the ground station development THRUST. The later contains an adaptive optics correction to enable single mode fiber coupling. This enables the interfacing to almost arbitrary quantum receivers such as the Bob modules used in the described experiment. The public channel is composed of a bi-directional 1 Gbps IM/DD system and a MODEM that implements a proprietary waveform optimized for free-space channels. The system was experimentally analyzed in a field test in the framework of the German initiative QuNET which addresses the use case of quantum secure communication for authorities. The results of the experiment are used to model a feasible LEO satellite-ground link. Performance indicators such as quantum bit error rate and secure key rate of a potential mission are estimated analytically.
The technological development of QKD (Quantum Key Distribution) is accelerating from a research topic towards commercial deployment. QKD initiatives are increasingly addressing real-world use cases. Besides lots of literature on theory and lab-demos, first high Technology-Readiness Level systems are available. Due to the security guarantees it has to provide, the performance of any QKD implementation is particularly sensitive to any imperfections that may lead to an increase of the QBER (Quantum Bit Error Rate). Achieving high performance, or a low QBER value, constitutes a challenging engineering task, as the operating systems need to be highly optimized in many aspects. In particular, accurate phase modulation is the foundation of high system performance in case of phase-encoding protocols. In most cases, the overall QBER is measured with a QKD receiver, which accumulates errors from transmitter, quantum channel and receiver. This requires an operational transmitter system and additionally prevents the investigation of the pure transmitter output signal’s characteristics. However, for support of transmitter integration and test activities as well as for validation tasks, a more suitable method remains to be developed. In this paper, we propose such a method by making use of a coherent receiver. This device provides extended signal information including the signal amplitude and its current relative phase. Therefore, it is possible to monitor phase-encoding correctness and precision, among other relevant signal properties. We analyze the reasonability of using a coherent receiver, by outlining its capabilites to measure QBER contributors occurring in a given basic reference QKD transmitter system. Our findings indicate that employing a coherent receiver is a simple method to accelerate development and validation of phase-encoding QKD transmitter systems.
As more aspects of modern society depend on digital communication, we increasingly rely on infrastructure that ensures the privacy and security of this communication. Classically, this has been provided by cryptographic protocols such as public-key encryption, in which secrets called keys are exchanged between different parties to enable secure communication. The rapid development of quantum algorithms which violate the assumptions of these protocols, however, poses a security challenge to modern cryptography. \n \nQuantum resources can also be used to strengthen cryptographic security, particularly the security of key exchange protocols. This approach, QKD, can be implemented by encoding in quantum systems such as single photons sent through free-space or a fiber. Fiber based QKD devices are already commercially available, but are fundamentally limited to distributing keys over a few hundred kilometers. To address this distance limitation, research QKD systems are being developed to exchange keys through free-space to satellites. This work considers practical challenges to building and testing both types of QKD devices. \n \nFirstly, we consider modeling and mission analysis for airborne demonstrations of QKD to stratospheric balloons and aircraft to simulate a satellite. Based on the mission parameters available for both platforms, we found aircraft platforms were more promising for testing prototype QKD satellite systems. We developed a mission planning tool to help design the flight geometries for testing the device. \n \nNext, we developed three new components for a QKD satellite prototype. The requirements for electro-optical devices in orbit are very different from lab environments, mandating new approaches to designing QKD devices. We developed a quad single photon detector package to meet the requirements for free-space links to low earth orbit. Moreover, we designed and built optical systems for analyzing the polarization of photons and an adaptive optics unit to increase the efficiency of collecting the encoded photons. All three devices were tested in conditions that simulated the time and loss of a satellite pass. \n \nFinally, we demonstrated a laser damage attack on a live commercial QKD system. Our attack injected additional optical power into the sender device to modify security-critical components. Specifically, our attack damaged the PIN diodes which monitor the encoded photon number, reducing their sensitivity or completely blinding them. Our damage could compromise the entire key, and was performed during system operation while raising no alarms. \n \nIn summary, this work shows the trade-offs of testing QKD payloads on different airborne platforms, develops components for a satellite QKD payload, and demonstrates a security vulnerability in a commercial QKD system that can fully compromise the key. These results help address practical challenges to building QKD devices, improving the security of modern cryptography.