Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Low-inductance superconducting quantum interferometer with two microbridge junctions

K. B. Lobanov, С. И. Бондаренко, A. G. Davydova, V.B. Bondarev

Published Nov 1, 1976• 0 citations
OpenAlex

Abstract

A detailed description of the design, fabrication, and characteristics of a SQUID interferometer is given. Superconducting Nb films are employed. (AIP)

Related papers

Integrated microwave SQUID

A. D. Smith, R. W. Simon, John F. Burch +2 more

We describe the properties of the single junction SQUID operated at microwave frequencies. The low inductance SQUID is fabricated in a thin film format and tightly coupled to an integrated superconducting transmission line and transformer. We discuss new modes of operation and opportunities for improved device and circuit performance.

IEEE Transactions on Magnetics•Mar 1, 1987•7 citations

Niobium Nano-SQUIDs for Inductive Superconducting Transition Edge Detectors

Xueshen Wang, Tom Godfrey, Tianyi Li +8 more

Nano-SQUIDs which can be the readout for inductive superconducting transition edge detectors (ISTED) were fabricated on monolayer niobium (Nb) film by focus ion beam (FIB) milling. The dimension of the nanobridges which formed the junctions was less than 60 nm and the diameter of the loop was 20 μm, The properties of this nano-SQUID were investigated. The design of ISTED was introduced and the transition temperature (Tc) of the absorbing layer was adjusted by both the thickness and the proportion Si doping of Nb.

Conference on Precision Electromagnetic Measurements•Jul 1, 2018•0 citations

Low-inductance superconducting quantum interferometer with two bridge contacts

K. B. Lobanov, С. И. Бондаренко, A. G. Davydova +1 more

Журнал технической физики•Nov 1, 1976•0 citations

Superconducting quantum interferometers made of thin films

W. Richter, G. Thomas Albrecht

•Jan 1, 1974•0 citations

Towards a Near Quantum-Limited Planar SLUG Amplifier at Microwave Frequencies

Gemma Chapman, Jamie Potter, Laith Meti +4 more

The Superconducting Low-inductance Undulatory Galvonometer (SLUG) microwave amplifier is distinct from a conventional SQUID amplifier in that the signal to be amplified is directly injected into the SQUID loop, allowing high frequency operation. Here, we discuss a planar SLUG amplifier constructed with nanobridge weak-links fabricated from a single niobium layer. DC characterisation of the SLUG gain element is presented for two nanobridge fabrication techniques. Measurements show that junctions fabricated from Ne focused-ion-beam, and from 100 keV electron-beam lithography, have significantly different DC characteristics with critical currents on the order of 100 μA and 1mA respectively. Both variants exhibit maximum forward transfer functions greater than 1.5 mV/Φ0, which is larger than those reported in Nb SIS-junction SLUGs. Theoretical modelling has shown that an amplifier containing a planar, nanobridge SLUG as a gain element is expected to exhibit gain exceeding 15 dB with large instantaneous bandwidth, and can be designed to operate well in excess of 20 GHz.

IEEE Transactions on Applied Superconductivity•Jan 10, 2024•5 citations

Superconducting Microbridge Junctions Fabricated using Focused Ion Beams

Giuseppe Carlo Tettamanzi, Chris I. Pakes, Alessandro Potenza +3 more

Sub-micron superconducting electronic devices may play a role in the realisation of proposed architectures for quantum computing and metrology. Further miniaturisation of superconducting electronics relies on the ability to fabricate the basic building block, the Josephson junction, on the scale of the superconducting coherence length, with sufficient accuracy that the junction characteristics may be controlled. Making use of focused ion beam technology to fabricate thin-film Nb microbridge devices, we examine the evolution of device characteristics with dimension, focusing on control of the critical current and suppression of superconductivity due to phase-slip behaviour.

•Jan 1, 2006•4 citations
Nano-SQUIDs which can be the readout for inductive superconducting transition edge detectors (ISTED) were fabricated on monolayer niobium (Nb) film by focus ion beam (FIB) milling. The dimension of the nanobridges which formed the junctions was less than 60 nm and the diameter of the loop was 20 μm, The properties of this nano-SQUID were investigated. The design of ISTED was introduced and the transition temperature (Tc) of the absorbing layer was adjusted by both the thickness and the proportion Si doping of Nb.
The Superconducting Low-inductance Undulatory Galvonometer (SLUG) microwave amplifier is distinct from a conventional SQUID amplifier in that the signal to be amplified is directly injected into the SQUID loop, allowing high frequency operation. Here, we discuss a planar SLUG amplifier constructed with nanobridge weak-links fabricated from a single niobium layer. DC characterisation of the SLUG gain element is presented for two nanobridge fabrication techniques. Measurements show that junctions fabricated from Ne focused-ion-beam, and from 100 keV electron-beam lithography, have significantly different DC characteristics with critical currents on the order of 100 μA and 1mA respectively. Both variants exhibit maximum forward transfer functions greater than 1.5 mV/Φ0, which is larger than those reported in Nb SIS-junction SLUGs. Theoretical modelling has shown that an amplifier containing a planar, nanobridge SLUG as a gain element is expected to exhibit gain exceeding 15 dB with large instantaneous bandwidth, and can be designed to operate well in excess of 20 GHz.
Sub-micron superconducting electronic devices may play a role in the realisation of proposed architectures for quantum computing and metrology. Further miniaturisation of superconducting electronics relies on the ability to fabricate the basic building block, the Josephson junction, on the scale of the superconducting coherence length, with sufficient accuracy that the junction characteristics may be controlled. Making use of focused ion beam technology to fabricate thin-film Nb microbridge devices, we examine the evolution of device characteristics with dimension, focusing on control of the critical current and suppression of superconductivity due to phase-slip behaviour.