Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Quantum Computing and Engineering (QCE)

Silicon Fin Capacitor for Superconducting Quantum Circuits

Patrick Sean Finnegan, Sueli Skinner Ramos, Robert B. Reyna, Scott Edward Weatherred, Stephen M. Carr

Published Aug 30, 2025• 0 citations
Publisher

Abstract

Superconducting circuits are a core platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions. In particular, a shunting coplanar capacitor may dominate the transmon qubit area. An alternative approach to a coplanar capacitor is to utilize the vertical dimension to define a capacitor using a vertical fin of silicon as the dielectric. Here we report on a vertical silicon fin capacitor for superconducting quantum circuits. A novel aspect of this work is a trench of controllable width on each side of the vertical silicon fin, enabling the additional superconducting quantum electrical circuitry to be microfabricated in or above the trench.

DOI
10.1109/qce65121.2025.10382

Related papers

Hybrid patterning of 3D silicon fin capacitors for quantum circuits

Patrick Sean Finnegan, Scott Edward Weatherred, Robert B. Reyna +3 more

Solid-state circuits are a compelling platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions (2D). In particular, a 2D shunting capacitor may dominate the transmon qubit area. An alternative approach to a 2D capacitor is to utilize the vertical dimension to define a three-dimensional (3D) capacitor using a vertical fin of silicon as the dielectric. Here we report on the hybrid patterning of vertical silicon fin capacitors for superconducting quantum circuits. Our hybrid patterning approach combines multiple top-down methods including precision crystallographic alignment methods, optical lithography, electron beam lithography, reactive ion etching, and wet etching. We utilize the hybrid patterning approach to realize a 3D capacitor defined by vertical aluminum electrodes with a vertical silicon fin as the dielectric. We evaluate the scaling of the physical dimensions of 3D silicon fin capacitors for a fixed value of the shunting capacitance consistent with transmon operation. Transmon qubit area incorporating a 3D silicon fin shunting capacitor may be reduced by several orders-of-magnitude compared to a state-of-the-art 2D shunting capacitor.

SPIE Novel Patterning Technologies•Apr 8, 2026•0 citations

Characterization of superconducting through-silicon vias as capacitive elements in quantum circuits

Thomas Hazard, Wayne H. Woods, Danna Rosenberg +13 more

The large physical size of superconducting qubits and their associated on-chip control structures presents a practical challenge toward building a large-scale quantum computer. In particular, transmons require a high-quality-factor shunting capacitance that is typically achieved by using a large coplanar capacitor. Other components, such as superconducting microwave resonators used for qubit state readout, are typically constructed from coplanar waveguides, which are millimeters in length. Here, we use compact superconducting through-silicon vias to realize lumped-element capacitors in both qubits and readout resonators to significantly reduce the on-chip footprint of both of these circuit elements. We measure two types of devices to show that through-silicon vias are of sufficient quality to be used as capacitive circuit elements and provide a significant reduction in size over existing approaches.

arXiv:2308.00834•Applied Physics Letters•Oct 9, 2023•15 citations

Fabrication and characterization of low-loss Al/Si/Al parallel plate capacitors for superconducting quantum information applications

Anthony McFadden, Aranya Goswami, Tongyu Zhao +7 more

Abstract Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below 300 nm with an approximate total height of 3 μm are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional A l/A l O x /A l Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500 k and qubit T 1 times greater than 25 μs. These results suggest that Si-Fins are a promising technology for applications that require low-loss, compact, superconductor-based capacitors with minimal stray capacitance.

arXiv:2408.01369•npj Quantum Information•Jan 22, 2025•11 citations

Towards merged-element transmons using silicon fins: The FinMET

Aranya Goswami, Anthony McFadden, Tongyu Zhao +7 more

A merged-element transmon (MET) device based on silicon (Si) fins is proposed, and the first steps to form such a “FinMET” are demonstrated. This new application of fin technology capitalizes on the anisotropic etch of Si(111) relative to Si(110) to define atomically flat, high aspect ratio Si tunnel barriers with epitaxial superconductor contacts on parallel sidewall surfaces. This process circumvents the challenges associated with the growth of low-loss insulating barriers on lattice matched superconductors. By implementing low-loss, intrinsic float-zone Si as the barrier material rather than commonly used, potentially lossy AlOx, the FinMET is expected to overcome problems with standard transmons by (1) reducing dielectric losses; (2) minimizing the formation of two-level system spectral features; (3) exhibiting greater control over barrier thickness and qubit frequency spread, especially when combined with commercial fin fabrication and atomic-layer or digital etching; (4) potentially reducing the footprint by several orders of magnitude; and (5) allowing scalable fabrication. Here, as a first step to making such a device, the fabrication of Si fin capacitors on Si(110) substrates with shadow-deposited Al electrodes is demonstrated. These fin capacitors are then fabricated into lumped element resonator circuits and probed using low-temperature microwave measurements. Further thinning of silicon junctions toward the tunneling regime will enable the scalable fabrication of FinMET devices based on existing silicon technology while simultaneously avoiding lossy amorphous dielectrics for the tunnel barriers.

arXiv:2108.11519•Applied Physics Letters•Aug 8, 2022•15 citations

Vacuum-gap transmon qubits realized using flip-chip technology

Xuegang Li, Yingshan Zhang, Chuhong Yang +26 more

Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use flip-chip technology to realize a modified transmon qubit, denoted as the “flipmon,” whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. We place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip, which is galvanically connected with the junction through an indium bump. The electric field energy participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 μm, thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are obtained in the range of 30–60 μs, which are comparable with that of conventional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface's energy participation ratio increases significantly and may dominate the flipmon's decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.

arXiv:2106.00341•Applied Physics Letters•Nov 1, 2021•35 citations

Control and readout of a transmon using a compact superconducting resonator

Julia Zotova, S. V. Sanduleanu, Gleb Fedorov +3 more

We demonstrate control and readout of a superconducting artificial atom based on a transmon qubit using a compact lumped-element resonator. The resonator consists of a parallel-plate capacitor with a wire geometric inductor. The footprint of the resonators is about 200 × 200 μm2, which is similar to the standard transmon size and one or two orders of magnitude more compact in the occupied area compared to coplanar waveguide resonators. We observe coherent Rabi oscillations and obtain time-domain properties of the transmon. The work opens a door to miniaturize essential components of superconducting circuits and to further scale up quantum systems with superconducting transmons.

arXiv:2312.15753•Applied Physics Letters•Mar 4, 2024•5 citations
Superconducting circuits are a core platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions. In particular, a shunting coplanar capacitor may dominate the transmon qubit area. An alternative approach to a coplanar capacitor is to utilize the vertical dimension to define a capacitor using a vertical fin of silicon as the dielectric. Here we report on a vertical silicon fin capacitor for superconducting quantum circuits. A novel aspect of this work is a trench of controllable width on each side of the vertical silicon fin, enabling the additional superconducting quantum electrical circuitry to be microfabricated in or above the trench.
Solid-state circuits are a compelling platform for quantum information science and engineering. A superconducting circuit known as the transmon has propelled much of the progress in the field yet is challenging to scale by replication and connection in two dimensions (2D). In particular, a 2D shunting capacitor may dominate the transmon qubit area. An alternative approach to a 2D capacitor is to utilize the vertical dimension to define a three-dimensional (3D) capacitor using a vertical fin of silicon as the dielectric. Here we report on the hybrid patterning of vertical silicon fin capacitors for superconducting quantum circuits. Our hybrid patterning approach combines multiple top-down methods including precision crystallographic alignment methods, optical lithography, electron beam lithography, reactive ion etching, and wet etching. We utilize the hybrid patterning approach to realize a 3D capacitor defined by vertical aluminum electrodes with a vertical silicon fin as the dielectric. We evaluate the scaling of the physical dimensions of 3D silicon fin capacitors for a fixed value of the shunting capacitance consistent with transmon operation. Transmon qubit area incorporating a 3D silicon fin shunting capacitor may be reduced by several orders-of-magnitude compared to a state-of-the-art 2D shunting capacitor.
The large physical size of superconducting qubits and their associated on-chip control structures presents a practical challenge toward building a large-scale quantum computer. In particular, transmons require a high-quality-factor shunting capacitance that is typically achieved by using a large coplanar capacitor. Other components, such as superconducting microwave resonators used for qubit state readout, are typically constructed from coplanar waveguides, which are millimeters in length. Here, we use compact superconducting through-silicon vias to realize lumped-element capacitors in both qubits and readout resonators to significantly reduce the on-chip footprint of both of these circuit elements. We measure two types of devices to show that through-silicon vias are of sufficient quality to be used as capacitive circuit elements and provide a significant reduction in size over existing approaches.
Abstract Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate capacitors composed of aluminum-contacted, crystalline silicon fins are shown to be a promising technology for use in superconducting circuits by evaluating the performance of lumped element resonators and transmon qubits. High aspect ratio Si-fin capacitors having widths below 300 nm with an approximate total height of 3 μm are fabricated using anisotropic wet etching of Si(110) substrates followed by aluminum metallization. The single-crystal Si capacitors are incorporated in lumped element resonators and transmons by shunting them with lithographically patterned aluminum inductors and conventional A l/A l O x /A l Josephson junctions respectively. Microwave characterization of these devices suggests state-of-the-art performance for superconducting parallel plate capacitors with low power internal quality factor of lumped element resonators greater than 500 k and qubit T 1 times greater than 25 μs. These results suggest that Si-Fins are a promising technology for applications that require low-loss, compact, superconductor-based capacitors with minimal stray capacitance.
A merged-element transmon (MET) device based on silicon (Si) fins is proposed, and the first steps to form such a “FinMET” are demonstrated. This new application of fin technology capitalizes on the anisotropic etch of Si(111) relative to Si(110) to define atomically flat, high aspect ratio Si tunnel barriers with epitaxial superconductor contacts on parallel sidewall surfaces. This process circumvents the challenges associated with the growth of low-loss insulating barriers on lattice matched superconductors. By implementing low-loss, intrinsic float-zone Si as the barrier material rather than commonly used, potentially lossy AlOx, the FinMET is expected to overcome problems with standard transmons by (1) reducing dielectric losses; (2) minimizing the formation of two-level system spectral features; (3) exhibiting greater control over barrier thickness and qubit frequency spread, especially when combined with commercial fin fabrication and atomic-layer or digital etching; (4) potentially reducing the footprint by several orders of magnitude; and (5) allowing scalable fabrication. Here, as a first step to making such a device, the fabrication of Si fin capacitors on Si(110) substrates with shadow-deposited Al electrodes is demonstrated. These fin capacitors are then fabricated into lumped element resonator circuits and probed using low-temperature microwave measurements. Further thinning of silicon junctions toward the tunneling regime will enable the scalable fabrication of FinMET devices based on existing silicon technology while simultaneously avoiding lossy amorphous dielectrics for the tunnel barriers.
Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use flip-chip technology to realize a modified transmon qubit, denoted as the “flipmon,” whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. We place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip, which is galvanically connected with the junction through an indium bump. The electric field energy participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 μm, thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are obtained in the range of 30–60 μs, which are comparable with that of conventional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface's energy participation ratio increases significantly and may dominate the flipmon's decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.
We demonstrate control and readout of a superconducting artificial atom based on a transmon qubit using a compact lumped-element resonator. The resonator consists of a parallel-plate capacitor with a wire geometric inductor. The footprint of the resonators is about 200 × 200 μm2, which is similar to the standard transmon size and one or two orders of magnitude more compact in the occupied area compared to coplanar waveguide resonators. We observe coherent Rabi oscillations and obtain time-domain properties of the transmon. The work opens a door to miniaturize essential components of superconducting circuits and to further scale up quantum systems with superconducting transmons.