Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Quantum Engineering

Combined Physical- and Link-Layer Protocols for Quantum Networks

Benedikt Baier, Ria Rosenauer, Vili Li, Christian Deppe, Wolfgang Kellerer

Published Nov 7, 2025• 0 citations
Publisher

Abstract

Future communication systems are expected to integrate quantum networks to enable highly secure communication and enhance computational capabilities. In quantum networks, communication is accomplished by sharing entanglement between remote locations, which is the basis for most known quantum protocols. Entanglement is a correlation between qubits that is not reproducible with classical means. However, as entanglement is susceptible to noise limiting its range, quantum repeaters can enable entanglement over more considerable distances. Using the entanglement swapping protocol, quantum repeaters can be placed between remote locations to establish entanglement. This requires each repeater to first generate entanglement with its neighboring nodes, named entanglement generation. However, as the size of current quantum networks is limited, the development and evaluation of quantum networks and quantum protocols is based on simulations. To simulate quantum networks accurately, accurate and high-performance models of the entanglement generation process must be employed. This paper proposes two new models for generating entanglement in simulations and develops quantum protocols for generating and purifying entanglement. The protocols are evaluated in thorough simulations under perfect and realistic conditions regarding delay and fidelity. Furthermore, the accuracy and runtime of the models are evaluated. The results show the models are accurate, with delay primarily influenced by the source duration, while longer coherence times significantly enhance fidelity. The model runtimes are consistently shorter than the simulation runtimes across all protocols, averaging about 2% of the total simulation time.

DOI
10.1109/tqe.2025.3630201

Related papers

Design and Evaluation of Communication Protocols for Quantum Repeater Networks

Luciano Aparicio

When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.

•Sep 27, 2011•2 citations

Simulation-Based Analysis of Delay-Reducing Quantum Data Plane Repeater Protocols

Benedikt Baier, Hendrik Bruhse, Carmen Mas Machuca +1 more

Emerging communication systems are expected to integrate new types of communication networks including quantum networks. In contrast to classical networks, the communication in quantum networks is accomplished with qubits and their attribute entanglement. Entanglement is a type of correlation between multiple qubits with no counterpart in classical communication. With the help of entanglement new protocols are developed to perform classical and quantum network tasks more efficiently. The main task of quantum networks is to share entanglement to distant communication partners with the help of intermediate nodes and repeated entanglement swapping, the so called Repeater Protocol. Due to the decoherence of quantum states, establishing entanglement has to be accomplished with minimal delay to preserve the states of qubits. This paper proposes a new Repeater Protocol FRP, which reduces delay by up to 51% and on average by 13% in establishing end-to-end entanglement compared with the direct approach CRP. Additionally, the provided solution lowers hardware requirements for quantum routers. Both protocols, CRP and FRP are evaluated in terms of end-to-end delay and fidelity in extensive simulations with a parameter search on 3 different topologies.

IEEE Future Networks World Forum (FNWF)•Oct 15, 2024•1 citation

A Connection-Oriented Entanglement Distribution Design in Quantum Networks

Jian Li, Qidong Jia, Kaiping Xue +2 more

Quantum networks create a completely new way for communication, and the most important function of a quantum network is to generate long-distance quantum entanglement to serve a number of quantum applications. As the scale of the network expands, in order to establish end-to-end entanglement between two remote nodes, entangled pairs need to be generated and distributed among multiple repeaters along the path from the source to the destination, which requires a specific protocol to negotiate resource allocations and quantum operations among the repeaters. Thus, to realize such remote entanglement distribution in a quantum network, designing a stable and reliable protocol becomes urgent and necessary. In this article, we focus on how to guarantee the generation rate of entangled pairs between any two quantum nodes to meet the requirements of various quantum applications in a large-scale quantum network. We present a connection-oriented entanglement distribution protocol inspired by the connection-oriented communication model in classical networks. Our protocol is located in the network layer of the quantum network to enable end-to-end quantum communication. Three main features are provided by the proposed protocol: 1) it is reliable and can guarantee the successful entanglement generation; 2) it can reduce the influence of quantum decoherence via reducing the latency caused by resource competition; and 3) it can guarantee the rate of generating entanglement between two quantum nodes according to the requirement of quantum applications.

IEEE Transactions on Quantum Engineering•Jan 1, 2022•34 citations

Efficient simulation of noisy entanglement generation

Lorenzo Brevi, Federico Grasselli, Alessandro Caraceni +3 more

End-to-end entanglement distribution is a key capability of upcoming quantum networks, enabling applications like distributed quantum computing, quantum sensor networks, and secure communications. Hence, its realistic and efficient simulation is crucial for quantum network design and for assessing the ability of a network to run certain applications. This work provides tools to scale-up and improve the realism of entanglement generation simulations in quantum networks. This is achieved by deriving analytical results that directly return the success probability, the output state and corresponding fidelity of a selected entanglement generation protocol, while accounting for a variety of noise sources affecting the protocol. These results are then integrated and streamlined in an upgraded version of SeQUeNCe, one of the most popular quantum network simulators. The resulting simulator features increased scalability by reducing computation time by more than 60%, while allowing for a variety of realistic noise sources, including imperfect mode matching, dark counts, and imperfect memory initialization. The simulator is also benchmarked with real experimental data and is capable of replicating the average entanglement generation time and the final state fidelity of a selected experiment. Altogether, the results can enhance current quantum network simulation capabilities towards large-scale networks, paving the way for the future quantum internet.

quant-pharXiv:2606.18808•Advanced Quantum Technologies•Jun 18, 2026•0 citations

Routing entanglement in the quantum internet

Mihir Pant, Hari Krovi, Don Towsley +5 more

Abstract Remote quantum entanglement can enable numerous applications including distributed quantum computation, secure communication, and precision sensing. We consider how a quantum network—nodes equipped with limited quantum processing capabilities connected via lossy optical links—can distribute high-rate entanglement simultaneously between multiple pairs of users. We develop protocols for such quantum “repeater” nodes, which enable a pair of users to achieve large gains in entanglement rates over using a linear chain of quantum repeaters, by exploiting the diversity of multiple paths in the network. Additionally, we develop repeater protocols that enable multiple user pairs to generate entanglement simultaneously at rates that can far exceed what is possible with repeaters time sharing among assisting individual entanglement flows. Our results suggest that the early-stage development of quantum memories with short coherence times and implementations of probabilistic Bell-state measurements can have a much more profound impact on quantum networks than may be apparent from analyzing linear repeater chains. This framework should spur the development of a general quantum network theory, bringing together quantum memory physics, quantum information theory, quantum error correction, and computer network theory.

arXiv:1708.07142•npj Quantum Information•Mar 13, 2019•486 citations

Entanglement Swapping Scheduling for Quantum Repeater Chains under Decoherence during Classical Communications

Jorge Benito Díaz, Andrés Agustí, Jabier Faba +3 more

First-generation quantum repeaters are essential in distributing entanglement over long distances since they could mitigate losses in optical fiber. Repeaters split the total distance into shorter, easier to generate links. Then, entanglement swapping establishes long range entanglement by performing local measurements at the repeaters and heralding their results. In this work, we develop an analytical model that estimates the impact of decoherence during heralding for a given protocol. Furthermore, we identify a competition between two phenomena: as repeater count increases, so does entanglement generation, but the additive impact of memory decoherence on final entanglement rate increases too. Therefore, we find that an optimal number of repeaters exists. These findings could lead the design of future quantum networks, both in the inter-repeater distance and swapping timings.

quant-pharXiv:2610.07991•Oct 7, 2026•0 citations
Future communication systems are expected to integrate quantum networks to enable highly secure communication and enhance computational capabilities. In quantum networks, communication is accomplished by sharing entanglement between remote locations, which is the basis for most known quantum protocols. Entanglement is a correlation between qubits that is not reproducible with classical means. However, as entanglement is susceptible to noise limiting its range, quantum repeaters can enable entanglement over more considerable distances. Using the entanglement swapping protocol, quantum repeaters can be placed between remote locations to establish entanglement. This requires each repeater to first generate entanglement with its neighboring nodes, named entanglement generation. However, as the size of current quantum networks is limited, the development and evaluation of quantum networks and quantum protocols is based on simulations. To simulate quantum networks accurately, accurate and high-performance models of the entanglement generation process must be employed. This paper proposes two new models for generating entanglement in simulations and develops quantum protocols for generating and purifying entanglement. The protocols are evaluated in thorough simulations under perfect and realistic conditions regarding delay and fidelity. Furthermore, the accuracy and runtime of the models are evaluated. The results show the models are accurate, with delay primarily influenced by the source duration, while longer coherence times significantly enhance fidelity. The model runtimes are consistently shorter than the simulation runtimes across all protocols, averaging about 2% of the total simulation time.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
Emerging communication systems are expected to integrate new types of communication networks including quantum networks. In contrast to classical networks, the communication in quantum networks is accomplished with qubits and their attribute entanglement. Entanglement is a type of correlation between multiple qubits with no counterpart in classical communication. With the help of entanglement new protocols are developed to perform classical and quantum network tasks more efficiently. The main task of quantum networks is to share entanglement to distant communication partners with the help of intermediate nodes and repeated entanglement swapping, the so called Repeater Protocol. Due to the decoherence of quantum states, establishing entanglement has to be accomplished with minimal delay to preserve the states of qubits. This paper proposes a new Repeater Protocol FRP, which reduces delay by up to 51% and on average by 13% in establishing end-to-end entanglement compared with the direct approach CRP. Additionally, the provided solution lowers hardware requirements for quantum routers. Both protocols, CRP and FRP are evaluated in terms of end-to-end delay and fidelity in extensive simulations with a parameter search on 3 different topologies.
Quantum networks create a completely new way for communication, and the most important function of a quantum network is to generate long-distance quantum entanglement to serve a number of quantum applications. As the scale of the network expands, in order to establish end-to-end entanglement between two remote nodes, entangled pairs need to be generated and distributed among multiple repeaters along the path from the source to the destination, which requires a specific protocol to negotiate resource allocations and quantum operations among the repeaters. Thus, to realize such remote entanglement distribution in a quantum network, designing a stable and reliable protocol becomes urgent and necessary. In this article, we focus on how to guarantee the generation rate of entangled pairs between any two quantum nodes to meet the requirements of various quantum applications in a large-scale quantum network. We present a connection-oriented entanglement distribution protocol inspired by the connection-oriented communication model in classical networks. Our protocol is located in the network layer of the quantum network to enable end-to-end quantum communication. Three main features are provided by the proposed protocol: 1) it is reliable and can guarantee the successful entanglement generation; 2) it can reduce the influence of quantum decoherence via reducing the latency caused by resource competition; and 3) it can guarantee the rate of generating entanglement between two quantum nodes according to the requirement of quantum applications.
End-to-end entanglement distribution is a key capability of upcoming quantum networks, enabling applications like distributed quantum computing, quantum sensor networks, and secure communications. Hence, its realistic and efficient simulation is crucial for quantum network design and for assessing the ability of a network to run certain applications. This work provides tools to scale-up and improve the realism of entanglement generation simulations in quantum networks. This is achieved by deriving analytical results that directly return the success probability, the output state and corresponding fidelity of a selected entanglement generation protocol, while accounting for a variety of noise sources affecting the protocol. These results are then integrated and streamlined in an upgraded version of SeQUeNCe, one of the most popular quantum network simulators. The resulting simulator features increased scalability by reducing computation time by more than 60%, while allowing for a variety of realistic noise sources, including imperfect mode matching, dark counts, and imperfect memory initialization. The simulator is also benchmarked with real experimental data and is capable of replicating the average entanglement generation time and the final state fidelity of a selected experiment. Altogether, the results can enhance current quantum network simulation capabilities towards large-scale networks, paving the way for the future quantum internet.
Abstract Remote quantum entanglement can enable numerous applications including distributed quantum computation, secure communication, and precision sensing. We consider how a quantum network—nodes equipped with limited quantum processing capabilities connected via lossy optical links—can distribute high-rate entanglement simultaneously between multiple pairs of users. We develop protocols for such quantum “repeater” nodes, which enable a pair of users to achieve large gains in entanglement rates over using a linear chain of quantum repeaters, by exploiting the diversity of multiple paths in the network. Additionally, we develop repeater protocols that enable multiple user pairs to generate entanglement simultaneously at rates that can far exceed what is possible with repeaters time sharing among assisting individual entanglement flows. Our results suggest that the early-stage development of quantum memories with short coherence times and implementations of probabilistic Bell-state measurements can have a much more profound impact on quantum networks than may be apparent from analyzing linear repeater chains. This framework should spur the development of a general quantum network theory, bringing together quantum memory physics, quantum information theory, quantum error correction, and computer network theory.
First-generation quantum repeaters are essential in distributing entanglement over long distances since they could mitigate losses in optical fiber. Repeaters split the total distance into shorter, easier to generate links. Then, entanglement swapping establishes long range entanglement by performing local measurements at the repeaters and heralding their results. In this work, we develop an analytical model that estimates the impact of decoherence during heralding for a given protocol. Furthermore, we identify a competition between two phenomena: as repeater count increases, so does entanglement generation, but the additive impact of memory decoherence on final entanglement rate increases too. Therefore, we find that an optimal number of repeaters exists. These findings could lead the design of future quantum networks, both in the inter-repeater distance and swapping timings.