Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Internet of Things Journal

A Lightweight and Efficient Authentication Protocol Based on AST PUF and Schnorr for IoT

Yuanfeng Xie, Weiwei Jiang, Hanqing Luo, Junhong Gan

Published Nov 6, 2025• 4 citations
Publisher

Abstract

This study presents an innovative authentication scheme that integrates Physical Unclonable Functions (PUFs) and Zero-Knowledge Proofs (ZKP) to provide efficient and secure authentication for Internet of Things (IoT) devices. Traditional PUF-based protocols offer strong security but incur high resource costs and slow authentication. To address this, we propose a joint scheme. First, a unified architecture combining a PUF–True Random Number Generator (TRNG) is introduced. This architecture utilizes a feedback permutation obfuscation mechanism and an arbitration delay deviation with a metastable design from a ring oscillator, ensuring the PUF–TRNG system possesses both attack resistance and true random properties. The architecture provides synchronization for both PUF and TRNG in the protocol. Next, we integrate Schnorr’s ZKP with a PUF-based key encapsulation and reconstruction scheme to construct an end-to-end anonymous identity authentication protocol that does not require real-time participation of a trusted third party. The protocol requires only two handshakes, significantly reducing the number of protocol rounds compared to related protocols. Finally, the PUF–TRNG architecture has been implemented on the Xilinx XC7A100T development board. Experimental results show that the PUF circuit effectively resists various modeling attacks. Formal verification with ProVerif demonstrates confidentiality, mutual authentication, and robustness against mainstream attacks. The protocol reduces area overhead and computational time by 43.04% and 42.99%, respectively, compared to similar protocols.

DOI
10.1109/jiot.2025.3629693

Related papers

A Provably Secure and Practical PUF-Based End-to-End Mutual Authentication and Key Exchange Protocol for IoT

Sensen Li, Tikui Zhang, Bin Yu +1 more

Device authentication and key exchange are essential issues for Internet of Things (IoT) which plays an indispensable role in modern life. Many sensor devices in IoT, with limited resources and poor self-protection capabilities, are deployed in the unattended and open places, making them vulnerable to physical attacks while facing traditional security threats. Despite several researches have been conducted by using the physical unclonable function (PUF) to immune the communication between IoT devices from the security threats above, as per the knowledge of the authors, current solutions rely on the participation of the server to distribute the key parameters, which requires high message overhead and markedly influences the efficiency. To fill this gap, this article proposes an end-to-end mutual authentication and key exchange protocol for IoT by combining PUF with certificateless public key cryptography (CL-PKC) on elliptic curve, which only needs “three handshakes” without the real-time participation of the server. The security analysis shows that the proposed protocol can not only secure the IoT devices from various attacks, but also provide perfect forward secrecy. Moreover, the experimental validation and performance analysis show the proposed protocol outperforms existing related protocols in terms of security features, protocol rounds and communication cost.

IEEE Sensors Journal•Oct 6, 2020•128 citations

Collaborative PUF and TRNG for SSL-Based IoT Authentication and Key Distribution

Qian Zhang, Yanfei Liu, Hao Zheng +3 more

A fundamental security challenge in the Internet of Things (IoT) is securing key storage on devices that are deployed in unsecured environments. This challenge which is essential for authentication and key distribution can be effectively addressed by employing Physical Unclonable Functions (PUF) for key management. We present a collaborative design of PUF and True Random Number Generator (TRNG), both based on semiconductor superlattice (SSL), to enhance the security of IoT key generation, mutual authentication, and key distribution. We established an experimental platform to evaluate the security features of the SSL-PUF and SSL-TRNG. Experimental results show that the SSL-TRNG passes the NIST SP 800-22 randomness tests, while the SSL-PUF demonstrates excellent uniformity, uniqueness, twin-similarity, and reliability. The proposed protocol resists multiple attacks, including insider, dictionary, replay, Man-in-The-Middle (MiTM), quantum computing, machine learning, key compromise, physical and cloning attacks, while demonstrating notable performance improvements. Specifically, it reduces communication and storage overhead by more than 34.5% and 45.5%, respectively, with low computational complexity and excellent scalability.

IEEE Internet of Things Journal•Sep 1, 2026•0 citations

ALPAK: (Anonymized Lightweight PUF-based group Authentication with Key distribution) for IoT Devices

Konjengbam Roshan Singh, Divyashikha Sethia

Securing applications that gather and transfer confidential information has become a critical challenge in the rapidly evolving Internet of Things (IoT) landscape. Such data’s authenticity, integrity, and confidentiality must be guaranteed while reducing security functions’ computation and communication overhead to accommodate the numerous constrained devices involved. Group authentication and key management are essential aspects of IoT security, but existing protocols often need to be more computationally expensive for IoT applications and must take care of anonymization. Consequently, IoT devices may be open to potential cyber-attacks due to the use of simple security primitives. Physically Unclonable Function (PUF) can enable in lightweight approach to authentication and key distribution among group members. The factorial tree and Chinese Remainder Theorem (CRT) can minimize communication messages required to renew the keys. This paper presents a novel protocol, Anonymized Lightweight PUF-based group Authentication with Key distribution (ALPAK) for IoT Devices, which improves the PUF-Based Lightweight Group Authentication and Key Distribution Protocol (PLGAKD) to enhance the anonymity of IoT devices. The paper further presents the formal verification of the ALPAK scheme with the Scyther tool and detailed security analysis.

International Conference on Computing, Communication and Networking Technologies (ICCCNT)•Jul 6, 2023•1 citation

Lightweight Anonymous Key Sharing Authentication Protocol for Resource-Constrained IoT Devices

Gunawan Widjaja

The Internet of Things (IoT), as a new type of communication network, is involved in developing and applying secure transmission and storing a large amount of sensitive information. Due to the IoT devices' constrained resources, high connection costs, sluggish transmission speeds, and the inapplicability of security fundamentals like public key methods and digital signatures for simple device authentication, this paper presents a lightweight anonymous key-sharing authentication protocol for IoT devices. The protocol utilizes the tamper-resistant and anti-cloning properties of Hardware Physical Unclonable Functions (PUFs) to generate shared keys. In addition, it incorporates security primitives such as the MASK algorithm and Hash functions. The security analysis and verification using Ban logic and the proper tool ProVerif demonstrate that the protocol can defend against attacks such as man-in-the-middle, de-synchronization, impersonation, and modeling attacks. Compared with other protocols, this protocol exhibits the characteristics of low computational cost, minimal communication overhead and storage capacity, and high-security performance, making it suitable for secure communication and transmission in resource-constrained devices.

International Conference On Smart Technologies For Smart Nation (SmartTechCon)•Aug 18, 2023•0 citations

PEAK: PUF-Based End-to-End Authentication and Key-Exchange for IoT

Chandranshu Gupta, Gaurav Varshney, Gaurav Kumar +1 more

We propose a lightweight end-to-end authentication and key-exchange protocol for resource-constrained IoT devices that avoids computationally expensive cryptographic operations by leveraging Physically Unclonable Functions (PUFs) and employs a lightweight Fuzzy Extractor (FE) to reliably handle PUF noise. The protocol relies exclusively on lightweight hash, XOR, and symmetric encryption/decryption operations. Moreover, the proposed protocol mitigates the storage overhead by avoiding the maintenance of large CRP repositories at the server. Security properties are formally verified using the scyther tool. A prototype implementation using two ESP32-based IoT nodes and a server further demonstrates its practicality for real-world deployments. Finally, benchmarking against state-of-the-art schemes indicates that the proposed protocol incurs comparatively low computation time and communication cost, highlighting its efficiency and lightweight nature.

IEEE Embedded Systems Letters•Jan 1, 2026•1 citation

Lightweight Anonymous Group Authentication and Quantum-Cloud Key Distribution Based on PUF for Classical Network Environments

Huanjie Zhang, Yang Chen, Shenghao Chen +2 more

With the rapid development of quantum computing, in response to its disruptive threats to traditional cryptosystems and the urgent demand for lightweight and highly scalable secure group communication among resource-constrained devices in large-scale Internet of Things (IoT) scenarios, this paper proposes a lightweight anonymous group authentication scheme that integrates Physical Unclonable Functions (PUFs), distributed Gossip algorithms, and quantum key distribution. By exploiting the uniqueness and unclonability derived from the inherent physical characteristics of PUF hardware, the scheme fundamentally eliminates attack vectors against quantum computers without requiring devices to pre-store any secret keys in their memory, while the QKCS pre-provisions CRPs and key seeds, which is the standard enrollment procedure in PUF-based systems. Combined with information-theoretically secure quantum keys as session keys, it forms a dual protection mechanism: anti-forgery at the physical layer and anti-quantum attack at the cryptographic layer. Innovatively, the Gossip algorithm is deeply integrated with group key agreement, converting global broadcast into local iterative interactions between nodes, which effectively alleviates broadcast storms and improves the scalability and fault tolerance of the protocol. Meanwhile, a pseudonym mechanism is introduced to achieve anonymous identity protection, and a dynamic key update strategy guarantees forward and backward security when members join or leave the group. Formal verification based on BAN logic and security analysis show that the proposed protocol can resist typical attacks such as replay attacks, man-in-the-middle attacks, and impersonation attacks. Performance evaluations demonstrate that our scheme outperforms existing comparable schemes in terms of computational cost, communication overhead, and dynamic group management efficiency, demonstrating its potential for resource-constrained IoT environments, pending further validation on real hardware platforms.

Sensors•Jul 31, 2026•0 citations
This study presents an innovative authentication scheme that integrates Physical Unclonable Functions (PUFs) and Zero-Knowledge Proofs (ZKP) to provide efficient and secure authentication for Internet of Things (IoT) devices. Traditional PUF-based protocols offer strong security but incur high resource costs and slow authentication. To address this, we propose a joint scheme. First, a unified architecture combining a PUF–True Random Number Generator (TRNG) is introduced. This architecture utilizes a feedback permutation obfuscation mechanism and an arbitration delay deviation with a metastable design from a ring oscillator, ensuring the PUF–TRNG system possesses both attack resistance and true random properties. The architecture provides synchronization for both PUF and TRNG in the protocol. Next, we integrate Schnorr’s ZKP with a PUF-based key encapsulation and reconstruction scheme to construct an end-to-end anonymous identity authentication protocol that does not require real-time participation of a trusted third party. The protocol requires only two handshakes, significantly reducing the number of protocol rounds compared to related protocols. Finally, the PUF–TRNG architecture has been implemented on the Xilinx XC7A100T development board. Experimental results show that the PUF circuit effectively resists various modeling attacks. Formal verification with ProVerif demonstrates confidentiality, mutual authentication, and robustness against mainstream attacks. The protocol reduces area overhead and computational time by 43.04% and 42.99%, respectively, compared to similar protocols.
Device authentication and key exchange are essential issues for Internet of Things (IoT) which plays an indispensable role in modern life. Many sensor devices in IoT, with limited resources and poor self-protection capabilities, are deployed in the unattended and open places, making them vulnerable to physical attacks while facing traditional security threats. Despite several researches have been conducted by using the physical unclonable function (PUF) to immune the communication between IoT devices from the security threats above, as per the knowledge of the authors, current solutions rely on the participation of the server to distribute the key parameters, which requires high message overhead and markedly influences the efficiency. To fill this gap, this article proposes an end-to-end mutual authentication and key exchange protocol for IoT by combining PUF with certificateless public key cryptography (CL-PKC) on elliptic curve, which only needs “three handshakes” without the real-time participation of the server. The security analysis shows that the proposed protocol can not only secure the IoT devices from various attacks, but also provide perfect forward secrecy. Moreover, the experimental validation and performance analysis show the proposed protocol outperforms existing related protocols in terms of security features, protocol rounds and communication cost.
A fundamental security challenge in the Internet of Things (IoT) is securing key storage on devices that are deployed in unsecured environments. This challenge which is essential for authentication and key distribution can be effectively addressed by employing Physical Unclonable Functions (PUF) for key management. We present a collaborative design of PUF and True Random Number Generator (TRNG), both based on semiconductor superlattice (SSL), to enhance the security of IoT key generation, mutual authentication, and key distribution. We established an experimental platform to evaluate the security features of the SSL-PUF and SSL-TRNG. Experimental results show that the SSL-TRNG passes the NIST SP 800-22 randomness tests, while the SSL-PUF demonstrates excellent uniformity, uniqueness, twin-similarity, and reliability. The proposed protocol resists multiple attacks, including insider, dictionary, replay, Man-in-The-Middle (MiTM), quantum computing, machine learning, key compromise, physical and cloning attacks, while demonstrating notable performance improvements. Specifically, it reduces communication and storage overhead by more than 34.5% and 45.5%, respectively, with low computational complexity and excellent scalability.
Securing applications that gather and transfer confidential information has become a critical challenge in the rapidly evolving Internet of Things (IoT) landscape. Such data’s authenticity, integrity, and confidentiality must be guaranteed while reducing security functions’ computation and communication overhead to accommodate the numerous constrained devices involved. Group authentication and key management are essential aspects of IoT security, but existing protocols often need to be more computationally expensive for IoT applications and must take care of anonymization. Consequently, IoT devices may be open to potential cyber-attacks due to the use of simple security primitives. Physically Unclonable Function (PUF) can enable in lightweight approach to authentication and key distribution among group members. The factorial tree and Chinese Remainder Theorem (CRT) can minimize communication messages required to renew the keys. This paper presents a novel protocol, Anonymized Lightweight PUF-based group Authentication with Key distribution (ALPAK) for IoT Devices, which improves the PUF-Based Lightweight Group Authentication and Key Distribution Protocol (PLGAKD) to enhance the anonymity of IoT devices. The paper further presents the formal verification of the ALPAK scheme with the Scyther tool and detailed security analysis.
The Internet of Things (IoT), as a new type of communication network, is involved in developing and applying secure transmission and storing a large amount of sensitive information. Due to the IoT devices' constrained resources, high connection costs, sluggish transmission speeds, and the inapplicability of security fundamentals like public key methods and digital signatures for simple device authentication, this paper presents a lightweight anonymous key-sharing authentication protocol for IoT devices. The protocol utilizes the tamper-resistant and anti-cloning properties of Hardware Physical Unclonable Functions (PUFs) to generate shared keys. In addition, it incorporates security primitives such as the MASK algorithm and Hash functions. The security analysis and verification using Ban logic and the proper tool ProVerif demonstrate that the protocol can defend against attacks such as man-in-the-middle, de-synchronization, impersonation, and modeling attacks. Compared with other protocols, this protocol exhibits the characteristics of low computational cost, minimal communication overhead and storage capacity, and high-security performance, making it suitable for secure communication and transmission in resource-constrained devices.
We propose a lightweight end-to-end authentication and key-exchange protocol for resource-constrained IoT devices that avoids computationally expensive cryptographic operations by leveraging Physically Unclonable Functions (PUFs) and employs a lightweight Fuzzy Extractor (FE) to reliably handle PUF noise. The protocol relies exclusively on lightweight hash, XOR, and symmetric encryption/decryption operations. Moreover, the proposed protocol mitigates the storage overhead by avoiding the maintenance of large CRP repositories at the server. Security properties are formally verified using the scyther tool. A prototype implementation using two ESP32-based IoT nodes and a server further demonstrates its practicality for real-world deployments. Finally, benchmarking against state-of-the-art schemes indicates that the proposed protocol incurs comparatively low computation time and communication cost, highlighting its efficiency and lightweight nature.
With the rapid development of quantum computing, in response to its disruptive threats to traditional cryptosystems and the urgent demand for lightweight and highly scalable secure group communication among resource-constrained devices in large-scale Internet of Things (IoT) scenarios, this paper proposes a lightweight anonymous group authentication scheme that integrates Physical Unclonable Functions (PUFs), distributed Gossip algorithms, and quantum key distribution. By exploiting the uniqueness and unclonability derived from the inherent physical characteristics of PUF hardware, the scheme fundamentally eliminates attack vectors against quantum computers without requiring devices to pre-store any secret keys in their memory, while the QKCS pre-provisions CRPs and key seeds, which is the standard enrollment procedure in PUF-based systems. Combined with information-theoretically secure quantum keys as session keys, it forms a dual protection mechanism: anti-forgery at the physical layer and anti-quantum attack at the cryptographic layer. Innovatively, the Gossip algorithm is deeply integrated with group key agreement, converting global broadcast into local iterative interactions between nodes, which effectively alleviates broadcast storms and improves the scalability and fault tolerance of the protocol. Meanwhile, a pseudonym mechanism is introduced to achieve anonymous identity protection, and a dynamic key update strategy guarantees forward and backward security when members join or leave the group. Formal verification based on BAN logic and security analysis show that the proposed protocol can resist typical attacks such as replay attacks, man-in-the-middle attacks, and impersonation attacks. Performance evaluations demonstrate that our scheme outperforms existing comparable schemes in terms of computational cost, communication overhead, and dynamic group management efficiency, demonstrating its potential for resource-constrained IoT environments, pending further validation on real hardware platforms.