Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Microwave permittivity and loss in epitaxial SrTiO3

Kamal Brahim, Andries Boelen, Anja Ulrich, Michiel Debaets, Tom Tandecki, Erfan Mafakheri, Conglin Sun, Yishu Huang, Anton Potočnik, Tsvetan Ivanov, Lukas Nulens, Joris Van de Vondel, Clément Merckling, Kristiaan De Greve, Christian Haffner

Published Nov 3, 2025• 4 citations
Publisher

Abstract

Materials that feature very high permittivity and very low losses at low temperatures offer interesting opportunities for improving the performance of a variety of microwave-optical devices such as phase shifters and quantum transducers. In this Letter, superconducting Al coplanar waveguide resonators between 4 and 6 GHz were used to determine the complex permittivity and loss of thin film SrTiO3 on Si at cryogenic temperatures. We report a permittivity of 1950 ± 140 and a high-power loss tangent (tan δSTO) of 3.4 ± 0.1×10−4 at millikelvin temperatures. To further investigate the potential of SrTiO3 for use in emerging quantum technology applications, the transition of tan δSTO into the single photon regime was analyzed. Our findings reveal a loss scaling that aligns closely with a two-level system loss mechanism. We observe a nearly two orders of magnitude difference in tan δSTO between high and low input power levels, consistent with that two-level system loss picture.

DOI
10.1063/5.0265424

Related papers

Thin film metrology and microwave loss characterization of indium and aluminum/indium superconducting planar resonators

Corey Rae McRae, J. H. Béjanin, C. T. Earnest +6 more

Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing material losses are crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature superconductor that can be used to bond pairs of chips containing standard aluminum-based qubit circuitry. In this work, we characterize microwave loss in indium and aluminum/indium thin films on silicon substrates by measuring superconducting coplanar waveguide resonators and estimating the main loss parameters at powers down to the sub-photon regime and at temperatures between 10 and 450 mK. We compare films deposited by thermal evaporation, sputtering, and molecular beam epitaxy. We study the effects of heating in a vacuum and ambient atmospheric pressure as well as the effects of pre-deposition wafer cleaning using hydrofluoric acid. The microwave measurements are supported by thin film metrology including secondary-ion mass spectrometry. For thermally evaporated and sputtered films, we find that two-level state are the dominant loss mechanism at low photon number and temperature, with a loss tangent due to native indium oxide of ∼5×10−5. The molecular beam epitaxial films show evidence of the formation of a substantial indium-silicon eutectic layer, which leads to a drastic degradation in resonator performance.

arXiv:1712.08706•Journal of Applied Physics•May 24, 2018•14 citations

Microwave losses in MgO, LaAlO3, and (La0.3Sr0.7)(Al0.65Ta0.35)O3 dielectrics at low power and in the millikelvin temperature range

M. Arzeo, Floriana Lombardi, Thilo Bauch

We have investigated both the temperature and the power dependence of microwave losses for various dielectrics commonly used as substrates for the growth of high critical temperature superconductor thin films. We present measurement of niobium superconducting λ∕2 coplanar waveguide resonators, fabricated on MgO, LaAlO3, and (La0.3Sr0.7)(Al0.65Ta0.35)O3 (LSAT), at the millikelvin temperature range and at low input power. By comparing our results with the two-level system model, we have discriminated among different dominant loss mechanisms. LSAT has shown the best results as regards the dielectric losses in the investigated regimes.

arXiv:1403.2078•Applied Physics Letters•May 26, 2014•15 citations

Materials loss measurements using superconducting microwave resonators

C. R. H. McRae, H. Wang, J. Gao +5 more

The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.

arXiv:2006.04718•Review of Scientific Instruments•Sep 1, 2020•293 citations

Cryogenic microwave loss in epitaxial Al/GaAs/Al trilayers for superconducting circuits

C. R. H. McRae, A. McFadden, R. Zhao +7 more

Epitaxially grown superconductor/dielectric/superconductor trilayers have the potential to form high-performance superconducting quantum devices and may even allow scalable superconducting quantum computing with low-surface-area qubits such as the merged-element transmon. In this work, we measure the power-independent loss and two-level-state (TLS) loss of epitaxial, wafer-bonded, and substrate-removed Al/GaAs/Al trilayers by measuring lumped element superconducting microwave resonators at millikelvin temperatures and down to single-photon powers. The power-independent loss of the device is (4.8±0.1)×10−5, and the resonator-induced intrinsic TLS loss is (6.4±0.2)×10−5. Dielectric loss extraction is used to determine a lower bound of the intrinsic TLS loss of the trilayer of 7.2×10−5. The unusually high power-independent loss is attributed to GaAs’s intrinsic piezoelectricity.

arXiv:2009.10101•Journal of Applied Physics•Jan 12, 2021•16 citations

Characterizing the attenuation of coaxial and rectangular microwave-frequency waveguides at cryogenic temperatures

Philipp Kurpiers, Theodore Walter, Paul Magnard +2 more

Low-loss waveguides are required for quantum communication at distances beyond the chip-scale for any low-temperature solid-state implementation of quantum information processors. We measure and analyze the attenuation constant of commercially available microwave-frequency waveguides down to millikelvin temperatures and single photon levels. More specifically, we characterize the frequency-dependent loss of a range of coaxial and rectangular microwave waveguides down to $0.005\ \mbox{dB}/\mbox{m}$ using a resonant-cavity technique. We study the loss tangent and relative permittivity of commonly used dielectric waveguide materials by measurements of the internal quality factors and their comparison with established loss models. The results of our characterization are relevant for accurately predicting the signal levels at the input of cryogenic devices, for reducing the loss in any detection chain, and for estimating the heat load induced by signal dissipation in cryogenic systems.

arXiv:1612.07977•EPJ Quantum Technology•May 4, 2017•52 citations

Low-temperature characterization of dielectric loss at microwave frequencies in aluminum oxide

Martin R. Otto

Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.

•Apr 9, 2015•1 citation
Materials that feature very high permittivity and very low losses at low temperatures offer interesting opportunities for improving the performance of a variety of microwave-optical devices such as phase shifters and quantum transducers. In this Letter, superconducting Al coplanar waveguide resonators between 4 and 6 GHz were used to determine the complex permittivity and loss of thin film SrTiO3 on Si at cryogenic temperatures. We report a permittivity of 1950 ± 140 and a high-power loss tangent (tan δSTO) of 3.4 ± 0.1×10−4 at millikelvin temperatures. To further investigate the potential of SrTiO3 for use in emerging quantum technology applications, the transition of tan δSTO into the single photon regime was analyzed. Our findings reveal a loss scaling that aligns closely with a two-level system loss mechanism. We observe a nearly two orders of magnitude difference in tan δSTO between high and low input power levels, consistent with that two-level system loss picture.
Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing material losses are crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature superconductor that can be used to bond pairs of chips containing standard aluminum-based qubit circuitry. In this work, we characterize microwave loss in indium and aluminum/indium thin films on silicon substrates by measuring superconducting coplanar waveguide resonators and estimating the main loss parameters at powers down to the sub-photon regime and at temperatures between 10 and 450 mK. We compare films deposited by thermal evaporation, sputtering, and molecular beam epitaxy. We study the effects of heating in a vacuum and ambient atmospheric pressure as well as the effects of pre-deposition wafer cleaning using hydrofluoric acid. The microwave measurements are supported by thin film metrology including secondary-ion mass spectrometry. For thermally evaporated and sputtered films, we find that two-level state are the dominant loss mechanism at low photon number and temperature, with a loss tangent due to native indium oxide of ∼5×10−5. The molecular beam epitaxial films show evidence of the formation of a substantial indium-silicon eutectic layer, which leads to a drastic degradation in resonator performance.
We have investigated both the temperature and the power dependence of microwave losses for various dielectrics commonly used as substrates for the growth of high critical temperature superconductor thin films. We present measurement of niobium superconducting λ∕2 coplanar waveguide resonators, fabricated on MgO, LaAlO3, and (La0.3Sr0.7)(Al0.65Ta0.35)O3 (LSAT), at the millikelvin temperature range and at low input power. By comparing our results with the two-level system model, we have discriminated among different dominant loss mechanisms. LSAT has shown the best results as regards the dielectric losses in the investigated regimes.
The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures. The identification of low loss fabrication techniques, materials, and thin film dielectrics is critical to achieving scalable architectures for superconducting quantum computing. Superconducting microwave resonators provide a convenient qubit proxy for assessing performance and studying TLS loss and other mechanisms relevant to superconducting circuits such as non-equilibrium quasiparticles and magnetic flux vortices. In this review article, we provide an overview of considerations for designing accurate resonator experiments to characterize loss, including applicable types of losses, cryogenic setup, device design, and methods for extracting material and interface losses, summarizing techniques that have been evolving for over two decades. Results from measurements of a wide variety of materials and processes are also summarized. Finally, we present recommendations for the reporting of loss data from superconducting microwave resonators to facilitate materials comparisons across the field.
Epitaxially grown superconductor/dielectric/superconductor trilayers have the potential to form high-performance superconducting quantum devices and may even allow scalable superconducting quantum computing with low-surface-area qubits such as the merged-element transmon. In this work, we measure the power-independent loss and two-level-state (TLS) loss of epitaxial, wafer-bonded, and substrate-removed Al/GaAs/Al trilayers by measuring lumped element superconducting microwave resonators at millikelvin temperatures and down to single-photon powers. The power-independent loss of the device is (4.8±0.1)×10−5, and the resonator-induced intrinsic TLS loss is (6.4±0.2)×10−5. Dielectric loss extraction is used to determine a lower bound of the intrinsic TLS loss of the trilayer of 7.2×10−5. The unusually high power-independent loss is attributed to GaAs’s intrinsic piezoelectricity.
Low-loss waveguides are required for quantum communication at distances beyond the chip-scale for any low-temperature solid-state implementation of quantum information processors. We measure and analyze the attenuation constant of commercially available microwave-frequency waveguides down to millikelvin temperatures and single photon levels. More specifically, we characterize the frequency-dependent loss of a range of coaxial and rectangular microwave waveguides down to $0.005\ \mbox{dB}/\mbox{m}$ using a resonant-cavity technique. We study the loss tangent and relative permittivity of commonly used dielectric waveguide materials by measurements of the internal quality factors and their comparison with established loss models. The results of our characterization are relevant for accurately predicting the signal levels at the input of cryogenic devices, for reducing the loss in any detection chain, and for estimating the heat load induced by signal dissipation in cryogenic systems.
Superconducting quantum devices have gained increasing interest over the past 15 years because of their role as promising candidates for implementing a large-scale quantum computer and as ultra-sensitive detectors. Superconducting resonators are one type of superconducting device which are used in a variety of applications including quantum computing and radioastronomy. They can achieve large quality factors which are important for these applications and a variety of others. Specific examples of these applications include the readout and coupling of superconducting qubits and also microwave kinetic inductance detector arrays for sub-mm wavelength astronomical measurements. High quality factors also enable the study of very subtle features in the electromagnetic response of the resonator. This feature in turn offers provides a method to characterize loss mechanisms which affect the performance of superconducting qubits, by measuring the quality factor of a resonator. Dielectric loss is an example of such a loss mechanism, and is considered to be one of, if not \\it the \\rm major obstacle to overcome in order to construct scalable quantum technologies based on superconducting devices. This type of loss arises from the coupling of the electric field in the device to spurious degrees of freedom which arise naturally the dielectric environment of the device. The fast-growing interest in the physics and applications of superconducting resonators has renewed interest in an improving our fundamental understanding of dielectric loss. This interest involves the study of a much bigger and older question in condensed matter physics; namely, what is the microscopic physics which governs the behaviour and of an amorphous material at low-temperatures? \n \nIn this thesis, we present a systematic study of dielectric loss in amorphous aluminum oxide using superconducting microwave resonators. Measurements of the intrinsic loss tangent over a large temperature range of 40~mK to 1~K are presented and analyzed in detail. Some aspects of the data are well understood in terms of the standard tunnelling two-level system model, while others require a deeper analysis of the electrodynamics of the resonator and insights from more advanced theories. We employ a consistent approach using numerical simulations of the resonator to understand loss mechanisms arising from both an inhomogeneous electric field and multiple dielectric layers. We measure saturation effects which provide insight into coherent properties of two-level system ensembles and the mutual interaction between them. Excellent agreement with the two-level system model is found for intrinsic losses, however the strong dependence on temperature which we observe for saturation effects is not predicted in the standard form of the model. We find that this dependence can be understood in terms of the theory of spectral diffusion which is consistent with a strong mutual interaction between two-level systems contributes to broadening of their spectral linewidths.