Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

AC Biased SFQ Clock Splitters for Current Mitigation

Tejumadejesu Oluwadamilare, Eby G. Friedman

Published Nov 5, 2025• 0 citations
Publisher

Abstract

High current requirements in single flux quantum (SFQ) circuits pose scalability challenges, contributing to issues such as high thermal loads, static power dissipation, and increased sensitivity to flux trapping under non-ideal shielding or cool down conditions. AC biasing, successfully used in other superconductive logic families, has been integrated into rapid single flux quantum (RSFQ) circuits and typically includes AC-to-DC converters, introducing area and complexity overhead. This work proposes an alternative method for applying AC biasing to existing RSFQ circuits using inductively coupled bias junctions, eliminating the need for AC-to-DC converters. This approach also combines resistive DC biasing with inductive AC biasing, reducing static power dissipation. The proposed approach targets clock splitters, which are significant contributors to on-chip current demand, achieving an average 94% reduction in splitter current and a 62% reduction in overall system current with a Josephson junction overhead of 6.5%. The technique is compatible with conventional RSFQ system architectures and logic families while significantly enhancing energy efficiency and scalability.

DOI
10.1109/tasc.2025.3629027

Related papers

SFQ Bias for SFQ Digital Circuits

Vasili K. Semenov, Evan B. Golden, Sergey K. Tolpygo

Superconductor electronics fabrication technology developed at MIT Lincoln Laboratory enables the development of VLSI digital circuits with millions of Josephson junctions per square centimeter. However, conventional DC and multi-phase AC biasing techniques already encounter serious challenges for scaling circuits above several hundred thousand junctions. In this work, we propose a novel AC-based biasing scheme for RSFQ-type logic families requiring DC bias. The major step toward this scheme is a superconducting AC/DC rectifier which we introduced at ASC 2014. We proposed to connect the rectifiers to “payload cells” via superconducting inductors with large inductance in order to reduce parasitic effects of flux quantization. Recently, we discovered that this powering scheme works even better at a much lower value of the inductance, when it is just sufficient to hold only one or two flux quanta in the inductive loop between the converter and the payload. In this case, flux quantization in the loop becomes beneficial because the value of current fed into the payload is defined by the value of the coupling inductance. Therefore, our AC/SFQ converter powers the payload cell by single flux quanta rather than by DC current. Such mode of operation is extremely energy efficient because energy is used only to recover the flux quantum consumed by the cell during the logic operation. We present designs of AC/SFQ converters comprising an AC/DC rectifier and a current conditioning circuit which we termed an SFQ filter. We also present test results and demonstrate AC/SFQ powering a payload circuit using circuits fabricated in a new, 150-nm node of Lincoln Laboratory fabrication technology using self-shunted Nb/AlOx-Al/Nb Josephson junctions with 600 μA/μm2critical current density and 200 nm minimum linewidth of inductors.

arXiv:2012.12405•IEEE Transactions on Applied Superconductivity•Mar 18, 2021•15 citations

AC Power Delivery for Fast Phase Logic

Changxu Song, Mustafa Altay Karamuftuoglu, Beyza Zeynep Ucpinar +4 more

Biasing remains one of the key scalability bottle necks in superconducting digital circuits, as traditional DC bias networks impose excessive power dissipation, large direct current requirements resulting in significant power overhead. Fast Phase Logic (FPL), an all-Josephson Junction (JJ) logic family, achieves ultra-high density by eliminating resistors and large inductors; however, existing FPL designs still rely on DC bias. This paper introduces a novel architecture: AC-biased FPL (ACFPL), which integrates single-phase AC/SFQ converters with FPL cells to deliver bias currents as quantized pulses, thereby eliminating the need for a global DC distribution network. Circuit-level simulations at 10 GHz demonstrate that AC biasing achieves up to 25× lower power consumption compared to DC bias for RSFQ circuits, and 14.3× reduction in power consumption for FPL circuits in our design-under-test (DUT), which combines FPL JTL, FPL DFF, and FPL AND cells. These results estab lish ACFPL as a scalable and energy-efficient alternative for large-scale superconducting digital systems, effectively combining compact FPL cell design with practical AC/SFQ bias delivery, allowing superconductor VLSI.

IEEE Transactions on Applied Superconductivity•Feb 10, 2026•0 citations

xeSFQ: clockless SFQ logic with zero bias network power dissipation

Jennifer E. Volk, George Tzimpragos, Oleg A. Mukhanov

Abstract Energy-efficient rapid single flux quantum (ERSFQ) circuits suppress the dominant static power dissipation of Rapid SFQ logic by replacing bias resistors with current-limiting bias Josephson junctions (JJs) and inductors. In practice, however, these JJs introduce power dissipation in the DC bias network due to switching events required to correct data-dependent phase imbalances, with dissipation often comparable to that of dynamic power. This paper presents xeSFQ, a new SFQ logic family that integrates alternating SFQ (xSFQ) encoding with ERSFQ biasing. By enforcing a single pulse per line per logical cycle, xeSFQ maintains uniform phase across the circuit, thereby eliminating bias JJ switching during operation and achieving zero bias network power dissipation. Extensive analog simulations and logic synthesis results, from individual gates to ISCAS and EPFL benchmarks, validate this hypothesis and demonstrate the efficiency and scalability advantages of the proposed approach.

arXiv:2411.03052•Superconductor Science and Technology•Jul 1, 2026•2 citations

Reduced Power Consumption in Superconducting Electronics

Thomas Ortlepp, Olaf Wetzstein, Sonja Engert +2 more

Rapid single flux quantum (RSFQ) electronics is based on the Josephson junction as an active switching element. In standard RSFQ circuits its switching energy is much lower than the static power consumption caused by the resistive current distribution network. Due to this thermal heating of the chip, the maximum number of junctions on a single chip is limited to about 1 million. The frequency-dependent contribution to power dissipation from junction switchings is only about 2 percent of the static one. This fact limits the direct construction of VLSI systems for high-performance computing as well as small-scale circuit applications in the vicinity of ultra-sensitive detectors or even quantum circuits. We present an assessment of different approaches for reducing the static power consumption by investigating the potential of inductive bias distribution networks as well as reduced critical currents. We analyse the operation stability of simple digital circuits with 5 times smaller critical currents at 4.2 K. The combination of the reduced critical currents and inductive biasing can provide digital superconductive circuits with significantly reduced static power consumption.

IEEE Transactions on Applied Superconductivity•Mar 29, 2011•39 citations

Research on the Bias Network of Energy-Efficient Single Flux Quantum Circuits

Guanqun Li, Jie Ren, Yu Wu +4 more

Superconducting single flux quantum (SFQ) circuits have been shown to offer huge advantages that are ideal for high performance computing applications. These circuits can operate at very high frequencies (tens of GHz) but consume very low power (from nanowatts to microwatts per gate). Energy-efficient SFQ (ERSFQ) circuits, evolved from traditional rapid SFQ (RSFQ) circuits, were invented with the goal of elimination of static power dissipation. When compared with RSFQ circuits, ERSFQ circuits require a new biasing network that includes biasing Josephson junction(s), biasing inductor(s), and feeding Josephson transmission line(s). Some general suggestions on how to design the network have been offered, but a detailed analysis and optimization scenario for the network is still to be provided. In this paper, we first optimize the previously reported DC-biased two-Josephson junction per bit RSFQ shift register circuit, which can be used to provide a more robust, energy-efficient, and high memory capacity storage unit. The simulated power dissipation of 16-bit RSFQ shift register is 0.45 μW per bit when operating at 21.7 GHz. We then convert the RSFQ-based shift register into an ERSFQ structure and investigate the effects of the ERSFQ bias network on the margins of the ERSFQ circuit. Finally, we propose a more comprehensive optimization method for the ERSFQ biasing network.

IEEE Transactions on Applied Superconductivity•May 2, 2019•11 citations

New AC-Powered SFQ Digital Circuits

Vasili K. Semenov, Yuri A. Polyakov, Sergey K. Tolpygo

Recent progress on reciprocal quantum logic (RQL) has renewed interest in ac powering of superconductor digital circuits, which had been abandoned since the famous IBM project of 1970s. In this paper, we propose and demonstrate new ac-biased single flux quantum (SFQ) circuits, and search for synergy of ac and currently dominating dc biasing schemes. As the first step, we suggest an on-chip ac/dc converter capable of feeding a few dc-biased gates surrounded by their ac-biased counterparts. As the second step, we introduce and present the first successful demonstration of a new ac-powered circuit-an 8192-bit shift register with over 32800 Josephson junctions (JJs) and JJ density of about 6 · 105 JJ per cm2. We suggest a few niche applications for this type of ac-biased circuits, which require high clock rates. For example, these circuits, scalable to millions of JJs per chip, can serve as a convenient benchmark for new SFQ fabrication technology nodes, allowing the operating margins of individual cells to be extracted and thus “visualize” individual fabrication defects and flux trapping events. The circuit can also be developed into a megapixel imaging array for a magnetic field microscope.

arXiv:1412.6552•IEEE Transactions on Applied Superconductivity•Dec 22, 2014•58 citations
High current requirements in single flux quantum (SFQ) circuits pose scalability challenges, contributing to issues such as high thermal loads, static power dissipation, and increased sensitivity to flux trapping under non-ideal shielding or cool down conditions. AC biasing, successfully used in other superconductive logic families, has been integrated into rapid single flux quantum (RSFQ) circuits and typically includes AC-to-DC converters, introducing area and complexity overhead. This work proposes an alternative method for applying AC biasing to existing RSFQ circuits using inductively coupled bias junctions, eliminating the need for AC-to-DC converters. This approach also combines resistive DC biasing with inductive AC biasing, reducing static power dissipation. The proposed approach targets clock splitters, which are significant contributors to on-chip current demand, achieving an average 94% reduction in splitter current and a 62% reduction in overall system current with a Josephson junction overhead of 6.5%. The technique is compatible with conventional RSFQ system architectures and logic families while significantly enhancing energy efficiency and scalability.
Superconductor electronics fabrication technology developed at MIT Lincoln Laboratory enables the development of VLSI digital circuits with millions of Josephson junctions per square centimeter. However, conventional DC and multi-phase AC biasing techniques already encounter serious challenges for scaling circuits above several hundred thousand junctions. In this work, we propose a novel AC-based biasing scheme for RSFQ-type logic families requiring DC bias. The major step toward this scheme is a superconducting AC/DC rectifier which we introduced at ASC 2014. We proposed to connect the rectifiers to “payload cells” via superconducting inductors with large inductance in order to reduce parasitic effects of flux quantization. Recently, we discovered that this powering scheme works even better at a much lower value of the inductance, when it is just sufficient to hold only one or two flux quanta in the inductive loop between the converter and the payload. In this case, flux quantization in the loop becomes beneficial because the value of current fed into the payload is defined by the value of the coupling inductance. Therefore, our AC/SFQ converter powers the payload cell by single flux quanta rather than by DC current. Such mode of operation is extremely energy efficient because energy is used only to recover the flux quantum consumed by the cell during the logic operation. We present designs of AC/SFQ converters comprising an AC/DC rectifier and a current conditioning circuit which we termed an SFQ filter. We also present test results and demonstrate AC/SFQ powering a payload circuit using circuits fabricated in a new, 150-nm node of Lincoln Laboratory fabrication technology using self-shunted Nb/AlOx-Al/Nb Josephson junctions with 600 μA/μm2critical current density and 200 nm minimum linewidth of inductors.
Biasing remains one of the key scalability bottle necks in superconducting digital circuits, as traditional DC bias networks impose excessive power dissipation, large direct current requirements resulting in significant power overhead. Fast Phase Logic (FPL), an all-Josephson Junction (JJ) logic family, achieves ultra-high density by eliminating resistors and large inductors; however, existing FPL designs still rely on DC bias. This paper introduces a novel architecture: AC-biased FPL (ACFPL), which integrates single-phase AC/SFQ converters with FPL cells to deliver bias currents as quantized pulses, thereby eliminating the need for a global DC distribution network. Circuit-level simulations at 10 GHz demonstrate that AC biasing achieves up to 25× lower power consumption compared to DC bias for RSFQ circuits, and 14.3× reduction in power consumption for FPL circuits in our design-under-test (DUT), which combines FPL JTL, FPL DFF, and FPL AND cells. These results estab lish ACFPL as a scalable and energy-efficient alternative for large-scale superconducting digital systems, effectively combining compact FPL cell design with practical AC/SFQ bias delivery, allowing superconductor VLSI.
Abstract Energy-efficient rapid single flux quantum (ERSFQ) circuits suppress the dominant static power dissipation of Rapid SFQ logic by replacing bias resistors with current-limiting bias Josephson junctions (JJs) and inductors. In practice, however, these JJs introduce power dissipation in the DC bias network due to switching events required to correct data-dependent phase imbalances, with dissipation often comparable to that of dynamic power. This paper presents xeSFQ, a new SFQ logic family that integrates alternating SFQ (xSFQ) encoding with ERSFQ biasing. By enforcing a single pulse per line per logical cycle, xeSFQ maintains uniform phase across the circuit, thereby eliminating bias JJ switching during operation and achieving zero bias network power dissipation. Extensive analog simulations and logic synthesis results, from individual gates to ISCAS and EPFL benchmarks, validate this hypothesis and demonstrate the efficiency and scalability advantages of the proposed approach.
Rapid single flux quantum (RSFQ) electronics is based on the Josephson junction as an active switching element. In standard RSFQ circuits its switching energy is much lower than the static power consumption caused by the resistive current distribution network. Due to this thermal heating of the chip, the maximum number of junctions on a single chip is limited to about 1 million. The frequency-dependent contribution to power dissipation from junction switchings is only about 2 percent of the static one. This fact limits the direct construction of VLSI systems for high-performance computing as well as small-scale circuit applications in the vicinity of ultra-sensitive detectors or even quantum circuits. We present an assessment of different approaches for reducing the static power consumption by investigating the potential of inductive bias distribution networks as well as reduced critical currents. We analyse the operation stability of simple digital circuits with 5 times smaller critical currents at 4.2 K. The combination of the reduced critical currents and inductive biasing can provide digital superconductive circuits with significantly reduced static power consumption.
Superconducting single flux quantum (SFQ) circuits have been shown to offer huge advantages that are ideal for high performance computing applications. These circuits can operate at very high frequencies (tens of GHz) but consume very low power (from nanowatts to microwatts per gate). Energy-efficient SFQ (ERSFQ) circuits, evolved from traditional rapid SFQ (RSFQ) circuits, were invented with the goal of elimination of static power dissipation. When compared with RSFQ circuits, ERSFQ circuits require a new biasing network that includes biasing Josephson junction(s), biasing inductor(s), and feeding Josephson transmission line(s). Some general suggestions on how to design the network have been offered, but a detailed analysis and optimization scenario for the network is still to be provided. In this paper, we first optimize the previously reported DC-biased two-Josephson junction per bit RSFQ shift register circuit, which can be used to provide a more robust, energy-efficient, and high memory capacity storage unit. The simulated power dissipation of 16-bit RSFQ shift register is 0.45 μW per bit when operating at 21.7 GHz. We then convert the RSFQ-based shift register into an ERSFQ structure and investigate the effects of the ERSFQ bias network on the margins of the ERSFQ circuit. Finally, we propose a more comprehensive optimization method for the ERSFQ biasing network.
Recent progress on reciprocal quantum logic (RQL) has renewed interest in ac powering of superconductor digital circuits, which had been abandoned since the famous IBM project of 1970s. In this paper, we propose and demonstrate new ac-biased single flux quantum (SFQ) circuits, and search for synergy of ac and currently dominating dc biasing schemes. As the first step, we suggest an on-chip ac/dc converter capable of feeding a few dc-biased gates surrounded by their ac-biased counterparts. As the second step, we introduce and present the first successful demonstration of a new ac-powered circuit-an 8192-bit shift register with over 32800 Josephson junctions (JJs) and JJ density of about 6 · 105 JJ per cm2. We suggest a few niche applications for this type of ac-biased circuits, which require high clock rates. For example, these circuits, scalable to millions of JJs per chip, can serve as a convenient benchmark for new SFQ fabrication technology nodes, allowing the operating margins of individual cells to be extracted and thus “visualize” individual fabrication defects and flux trapping events. The circuit can also be developed into a megapixel imaging array for a magnetic field microscope.