Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Letters

Quantum-Enhanced Interferometer for Multiphase Sensing

Yanni Feng, Zhaoqing Zeng, Jialin Cheng, Zhaolin You, Huadong Lu, Zhihui Yan, Xiaojun Jia, Changde Xie, Kunchi Peng

Published Oct 7, 2025• 10 citations
Publisher

Abstract

Quantum-enhanced interferometers have been widely used in single-parameter precision measurement, and multiparameter precision measurement is the building block of numerous sensing and imaging applications. However, it remains challenging to realize high-sensitivity multiparameter sensing without increasing power, which is crucial for biological science. Here, we propose and demonstrate a deterministic quantum-enhanced interferometer, where high-sensitivity multiparameter sensing is realized by effectively squeezing noises and amplifying signals. Key technologies are essential to the results, including the parallel and sequential use of squeezed states inside the interferometer. Notably, in the quantum-enhanced three-arm interferometer, not only joint but also individual values of three signals are simultaneously measured with a signal-to-noise ratio of more than 10.37±0.13 dB compared with that of the conventional interferometer under the same phase-sensing power. These advances constitute a critical step toward observing multiple elusive signals and give rise to a wide range of sensing and imaging applications.

DOI
10.1103/2hsx-5qfr

Related papers

Quantum-enhanced multiparameter estimation in multiarm interferometers

Mario Arnolfo Ciampini, Nicolò Spagnolo, Chiara Vitelli +3 more

Quantum metrology is the state-of-the-art measurement technology. It uses quantum resources to enhance the sensitivity of phase estimation over that achievable by classical physics. While single parameter estimation theory has been widely investigated, much less is known about the simultaneous estimation of multiple phases, which finds key applications in imaging and sensing. In this manuscript we provide conditions of useful particle (qudit) entanglement for multiphase estimation and adapt them to multiarm Mach-Zehnder interferometry. We theoretically discuss benchmark multimode Fock states containing useful qudit entanglement and overcoming the sensitivity of separable qudit states in three and four arm Mach-Zehnder-like interferometers - currently within the reach of integrated photonics technology.

arXiv:1507.07814•Scientific Reports•Jul 6, 2016•109 citations

Quantum Interferometer Combining Squeezing and Parametric Amplification

Xiaojie Zuo, Zhihui Yan, Yanni Feng +4 more

High precision interferometers are the building blocks of precision metrology and the ultimate interferometric sensitivity is limited by the quantum noise. Here, we propose and experimentally demonstrate a compact quantum interferometer involving two optical parametric amplifiers and the squeezed states generated within the interferometer are directly used for the phase-sensing quantum state. By both squeezing shot noise and amplifying phase-sensing intensity the sensitivity improvement of 4.86±0.24 dB beyond the standard quantum limit is deterministically realized and a minimum detectable phase smaller than that of all present interferometers under the same phase-sensing intensity is achieved. This interferometric system has significantly potential applications in a variety of measurements for tiny variances of physical quantities.

arXiv:2005.01911•Physical Review Letters•May 1, 2020•81 citations

Quantum Twin Interferometer

Wei Du, Shuhe Wu, Guzhi Bao +1 more

We present an innovative quantum-correlated interferometer termed the “quantum twin interferometer,” which employs two pairs of entangled twin beams in a parallel configuration. This architecture enables full exploitation of quantum resources via an entangled detection scheme. We demonstrate distributed phase sensing with 3 dB of quantum noise reduction in phase-sensing power at the milliwatt level, improving the state-of-the-art signal-to-noise ratio (SNR) of photon-correlated interferometers by three orders of magnitude. The techniques developed herein are poised to revolutionize a wide range of quantum devices that demand high-precision phase measurement.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Aug 1, 2026•0 citations

Quantum metrology with parametric amplifier-based photon correlation interferometers

Florian Hudelist, Jia Kong, Cunjin Liu +3 more

Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.

Nature Communications•Jan 29, 2014•432 citations

Coherent Amplifier-Empowered Quantum Interferometer: Preserving Sensitivity and Quantum Advantage under High Loss

Jie Zhao, Zeliang Wu, Haoran Liu +6 more

Quantum interferometers offer phase measurement capabilities that surpass the standard quantum limit (SQL), with phase sensitivity and quantum enhancement factor serving as key performance metrics. However, practical implementations face severe degradation of both metrics due to unavoidable losses, representing the foremost challenge in advancing quantum interferometry toward real-world applications. To address this challenge, we propose a coherent-amplifier-empowered quantum interferometer. The coherent amplifier dramatically suppresses the decay of both sensitivity and quantum enhancement under high-loss conditions, maintaining phase sensitivity beyond the original SQL even for losses exceeding 90%. Using an injected 4.2 dB squeezed-vacuum state in experimental demonstration, our scheme reduces the quantum enhancement degradation under 90% loss from 3.7 dB in a conventional quantum interferometer (CQI) to only 1.5 dB. More importantly, the phase sensitivity degradation under the same loss is limited to 4.0 dB, markedly outperforming the 11.2 dB degradation observed in a CQI. This improvement is enabled by the coherent amplifier's phase-sensitive photon amplification and its protection of the quantum state. This breakthrough in amplifier-empowered quantum interferometry overcomes the critical barrier to practical deployment, enabling robust quantum-enhanced measurements in lossy environments.

quant-pharXiv:2601.17876•Jan 27, 2026•0 citations

High-Sensitivity Quantum-Enhanced Interferometers

Juan Li Yu, Yinhua Wu, Liang Nie +1 more

High-sensitivity interferometers are one of the basic tools for precision measurement, and their sensitivity is limited by their shot noise limit (SNL), which is determined by vacuum fluctuations of the probe field. The quantum interferometer with novel structures can break the SNL and measure the weak signals, such as the direct observation of gravity wave signal. Combining classical interferometers and the optical parametric amplifier (OPA) can enhance the signal; meanwhile, the quantum noise is kept at the vacuum level, so that the sensitivity of the nonlinear interferometer beyond the SNL can be achieved. By analyzing in detail the influence of system parameters on the precision of quantum metrology, including the intensity of optical fields for phase sensing, the gain factor of OPA, and the losses inside and outside the interferometers, the application conditions of high-sensitivity nonlinear quantum interferometers are obtained. Quantum interferometer-based OPAs provide the direct references for the practical development of quantum precise measurement.

Photonics•Jun 29, 2023•2 citations
Quantum-enhanced interferometers have been widely used in single-parameter precision measurement, and multiparameter precision measurement is the building block of numerous sensing and imaging applications. However, it remains challenging to realize high-sensitivity multiparameter sensing without increasing power, which is crucial for biological science. Here, we propose and demonstrate a deterministic quantum-enhanced interferometer, where high-sensitivity multiparameter sensing is realized by effectively squeezing noises and amplifying signals. Key technologies are essential to the results, including the parallel and sequential use of squeezed states inside the interferometer. Notably, in the quantum-enhanced three-arm interferometer, not only joint but also individual values of three signals are simultaneously measured with a signal-to-noise ratio of more than 10.37±0.13 dB compared with that of the conventional interferometer under the same phase-sensing power. These advances constitute a critical step toward observing multiple elusive signals and give rise to a wide range of sensing and imaging applications.
Quantum metrology is the state-of-the-art measurement technology. It uses quantum resources to enhance the sensitivity of phase estimation over that achievable by classical physics. While single parameter estimation theory has been widely investigated, much less is known about the simultaneous estimation of multiple phases, which finds key applications in imaging and sensing. In this manuscript we provide conditions of useful particle (qudit) entanglement for multiphase estimation and adapt them to multiarm Mach-Zehnder interferometry. We theoretically discuss benchmark multimode Fock states containing useful qudit entanglement and overcoming the sensitivity of separable qudit states in three and four arm Mach-Zehnder-like interferometers - currently within the reach of integrated photonics technology.
High precision interferometers are the building blocks of precision metrology and the ultimate interferometric sensitivity is limited by the quantum noise. Here, we propose and experimentally demonstrate a compact quantum interferometer involving two optical parametric amplifiers and the squeezed states generated within the interferometer are directly used for the phase-sensing quantum state. By both squeezing shot noise and amplifying phase-sensing intensity the sensitivity improvement of 4.86±0.24 dB beyond the standard quantum limit is deterministically realized and a minimum detectable phase smaller than that of all present interferometers under the same phase-sensing intensity is achieved. This interferometric system has significantly potential applications in a variety of measurements for tiny variances of physical quantities.
We present an innovative quantum-correlated interferometer termed the “quantum twin interferometer,” which employs two pairs of entangled twin beams in a parallel configuration. This architecture enables full exploitation of quantum resources via an entangled detection scheme. We demonstrate distributed phase sensing with 3 dB of quantum noise reduction in phase-sensing power at the milliwatt level, improving the state-of-the-art signal-to-noise ratio (SNR) of photon-correlated interferometers by three orders of magnitude. The techniques developed herein are poised to revolutionize a wide range of quantum devices that demand high-precision phase measurement.
Conventional interferometers usually utilize beam splitters for wave splitting and recombination. These interferometers are widely used for precision measurement. Their sensitivity for phase measurement is limited by the shot noise, which can be suppressed with squeezed states of light. Here we study a new type of interferometer in which the beam splitting and recombination elements are parametric amplifiers. We observe an improvement of 4.1±0.3 dB in signal-to-noise ratio compared with a conventional interferometer under the same operating condition, which is a 1.6-fold enhancement in rms phase measurement sensitivity beyond the shot noise limit. The improvement is due to signal enhancement. Combined with the squeezed state technique for shot noise suppression, this interferometer promises further improvement in sensitivity. Furthermore, because nonlinear processes are involved in this interferometer, we can couple a variety of different waves and form new types of hybrid interferometers, opening a door for many applications in metrology. Interferometers play a key role in precision measurements and metrology. Here, the authors demonstrate a new type of interferometer that replaces the standard beam splitter elements with parametric amplifiers, which provides enhanced performance compared with a Mach–Zehnder interferometer.
Quantum interferometers offer phase measurement capabilities that surpass the standard quantum limit (SQL), with phase sensitivity and quantum enhancement factor serving as key performance metrics. However, practical implementations face severe degradation of both metrics due to unavoidable losses, representing the foremost challenge in advancing quantum interferometry toward real-world applications. To address this challenge, we propose a coherent-amplifier-empowered quantum interferometer. The coherent amplifier dramatically suppresses the decay of both sensitivity and quantum enhancement under high-loss conditions, maintaining phase sensitivity beyond the original SQL even for losses exceeding 90%. Using an injected 4.2 dB squeezed-vacuum state in experimental demonstration, our scheme reduces the quantum enhancement degradation under 90% loss from 3.7 dB in a conventional quantum interferometer (CQI) to only 1.5 dB. More importantly, the phase sensitivity degradation under the same loss is limited to 4.0 dB, markedly outperforming the 11.2 dB degradation observed in a CQI. This improvement is enabled by the coherent amplifier's phase-sensitive photon amplification and its protection of the quantum state. This breakthrough in amplifier-empowered quantum interferometry overcomes the critical barrier to practical deployment, enabling robust quantum-enhanced measurements in lossy environments.
High-sensitivity interferometers are one of the basic tools for precision measurement, and their sensitivity is limited by their shot noise limit (SNL), which is determined by vacuum fluctuations of the probe field. The quantum interferometer with novel structures can break the SNL and measure the weak signals, such as the direct observation of gravity wave signal. Combining classical interferometers and the optical parametric amplifier (OPA) can enhance the signal; meanwhile, the quantum noise is kept at the vacuum level, so that the sensitivity of the nonlinear interferometer beyond the SNL can be achieved. By analyzing in detail the influence of system parameters on the precision of quantum metrology, including the intensity of optical fields for phase sensing, the gain factor of OPA, and the losses inside and outside the interferometers, the application conditions of high-sensitivity nonlinear quantum interferometers are obtained. Quantum interferometer-based OPAs provide the direct references for the practical development of quantum precise measurement.