Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Results in Optics

Sub-megahertz laser stabilization by harnessing orthogonality between the acousto-optic modulator dither and atomic spectroscopy

Phatwarach Siriworakoonchai, Parinya Udommai, Nuttanan Tanasanchai, Waranont Anukool

Published Oct 28, 2025• 4 citations
Publisher

Abstract

A sub-MHz frequency stability of the laser is crucial in the quantum-atom experiment where precise atomic transition is required for control and manipulation of atom like in the atom quantum computing. In this work, we have built the frequency stabilization system for the lasers used in our cold Rubidium atom experiment in the magneto-optical trap (MOT) and the optical tweezers. We utilized a Rubidium vapour glass cell as a frequency reference, which provides atomically absolute reference point with low complexity setup. By mean of the absorption of the laser beam by the Rubidium vapour, the saturated absorption spectroscopy (SAS) experiment was setup to produce the D2 line spectra. The acousto-optic modulator (AOM) was used to sinusoidally dither the laser frequency and consequently the resonance peaks in the spectra. Detailing in this work, the AOM sinusoidal dithering and the dithered SAS signal had orthogonality and were processed together to produce the error signal used to stabilize the laser frequency to the resonant peak. This frequency stabilization system achieved the frequency standard deviation below 0.80 MHz over up to 8 min 00 period. The system also allowed for stabilized frequency tunability over a range of 55 - 60 MHz about the target resonance peak. This performance is significant for stabilizing the lasers in the MOT experiment and related quantum-atom research.

DOI
10.1016/j.rio.2025.100920

Related papers

Miniature laser frequency stabilization module for cold atom sensing

Qingzhe Gou, Ning Wei, Haixu Tao +4 more

In this study, a miniature laser frequency stabilization module for cold atom sensing applications was designed and realized.The module can lock the laser frequency to the saturated absorption spectrum of the D2 line of rubidium (Rb) atoms using the frequency modulation spectroscopy method.The module core is a tiny Rb cell, co-packaged with the saturation absorption optical setup, temperature control circuit, and detection circuit through a joint optical-mechanical-electrical design for a total volume of only 40 mm × 15 mm × 30 mm.The frequency fluctuation of the 780 nm laser after frequency stabilization by the module was within 1 MHz over 1000 s, which is adequate for magneto-optical trap experiments.The results verify the feasibility of the module as a frequency reference and provide a light source for portable cold atom sensing devices.

Chinese Optics Letters•Jan 1, 2024•1 citation

Laser Stabilization via Saturation Absorption Spectroscopy

Mehmet Hüseyin Sevim, Kamil Çınar, Murat Salim Karabinaoğlu +3 more

Precise laser stabilization is a fundamental aspect of modern metrology, directly influencing the accuracy of fundamental measurements in fields such as high-precision metrology, atomic sensor applications, and quantum technologies. Saturation absorption spectroscopy (SAS) is one of the most effective techniques for achieving high spectral stability, as it enables laser frequencies to be locked to atomic resonances. This technique exploits the nonlinear interaction between a weaker probe beam and a stronger pump beam within a rubidium (Rb) atomic vapor cell. By eliminating Doppler broadening, SAS allows well-defined hyperfine transitions to be resolved, providing a reliable optical frequency reference. This study aims to optimize laser frequency stabilization using the SAS technique by investigating the effects of laser light polarization, atomic vapor cell temperature, and pump-probe power adjustments. Polarization-dependent selection rules influence transition probabilities, thereby affecting spectral contrast and frequency stability. Additionally, atomic density variations, which depend on the vapor cell temperature, influence signal strength and linewidth, necessitating precise temperature control for optimal performance. Furthermore, the pump power must be sufficient to induce saturation without excessive power broadening, while the probe power must remain low enough to prevent spectral line distortion. By optimizing polarization, temperature, and power parameters, the stabilization of the Rb atomic laser can be enhanced, leading to improved reproducibility and consistency in high-precision measurements. SAS-based laser stabilization is particularly crucial for atomic sensor applications and quantum technologies, where highly stable, narrow-linewidth lasers are essential for precision measurements. Applications such as atomic magnetometers, gyroscopes, and inertial navigation systems depend on precisely stabilized lasers for optimal performance. By enhancing the reliability of laser frequency stabilization, this work contributes to the advancement of next-generation atomic sensors with improved sensitivity and stability.

•Jan 1, 2025•0 citations

Exploring the Zeeman effect in spectroscopy for laser frequency manipulation in optical systems

Nuttanan Tanasanchai, Phatwarach Siriworakoonchai, Parinya Udommai +1 more

Abstract In optical systems, acousto-optic modulators (AOMs) and electro-optic modulators (EOMs) are commonly utilized for laser frequency manipulation. However, these devices come with drawbacks such as high cost and the requirement of optical adjustments to change the frequency shift direction. In this study, we propose an alternative method that harnesses the Zeeman effect in the saturated-absorption spectroscopy to shift the energy levels in atom. With this technique, the laser frequency can be shifted without the need for AOMs or EOMs. The stability of laser locking was investigated for any case of polarization of probe and pump beam. We found when the polarization of the probe and pump beams is linear and perpendicular, it results in the highest level of stability in laser locking compared to other polarization configurations.

Journal of Physics Conference Series•Dec 1, 2023•0 citations

A home-built lock-in amplifier for laser frequency stabilization

K Sowka, M. Weel, S. Cauchi +2 more

We describe an inexpensive lock-in amplifier that can be built using discrete off-the-shelf RF components and home-built analog circuits. This lock-in has been used in a feedback loop to lock the frequency of a laser to an atomic transition. The frequency stability was tested by trapping rubidium atoms. The feedback loop involves obtaining a modulated saturated absorption signal from a vapor cell using an acousto-optic modulator to modulate the laser frequency. The absorption signal is sent to the lock-in to generate an error signal, proportional to the first derivative of the absorption, which is fed back to the laser to complete the feedback loop. We also demonstrate a simplified optical setup for viewing the saturated absorption spectrum. In this case, the signal consists of narrow saturated absorption spectra riding on top of a Doppler-broadened pedestal. We show that it is possible to greatly reduce the effect of this background and lock the laser to the atomic resonance by modifying the home-built lock-in to generate an error signal proportional to the third derivative of the absorption. The results of this work can be adapted for advanced undergraduate laboratory work.PACS Nos.: 01.50Pa, 07.50.–e, 42.62Fi, 42.60Fc

Canadian Journal of Physics•Sep 1, 2005•14 citations

Improving 795 nm Single-Frequency Laser’s Frequency Stability by Means of the Bright-State Spectroscopy with Rubidium Vapor Cell

Junye Zhao, Yongbiao Yang, Lulu Zhang +2 more

The utilization of atomic or molecular spectroscopy for frequency locking of single-frequency laser to improve laser frequency stability plays an important role in the experimental investigation of optically pumped atomic magnetometers, atomic clocks, laser cooling and trapping of atoms, etc. We have experimentally demonstrated a technique for frequency stabilization of a single-frequency laser employing the bright state spectroscopy (BSS) with a rubidium atomic vapor cell. By utilizing the counter-propagating dual-frequency 795 nm laser beams with mutually orthogonal linear polarization and a frequency difference of 6.834 GHz, which is equal to the hyperfine splitting of rubidium-87 ground state 5S1/2, an absorption-enhanced signal with narrow linewidth at the center of Doppler-broadened transmission spectroscopy is observed when continuous scanning the laser frequency over rubidium-87 D1 transition. This is the so-called BSS. Amplitude of the absorption-enhanced signal in the BSS is much larger compared with the conventional saturation absorption spectroscopy (SAS). The relationship between linewidth and amplitude of the BSS signal and laser beam intensity has been investigated. This high-contrast absorption-enhanced BSS signal has been employed for the laser frequency stabilization. The experimental results show that the frequency stability is 4.4×10−11 with an integration time of 40 s, near one order of magnitude better than that for using the SAS.

Photonics•Dec 11, 2024•6 citations

Laser system for frequency domain velocimetry and atom interferometry experiments

J. Randhawa, G. Carlse, M. B. Llaguno +5 more

We discuss the characterization and specifications of a home-built external cavity diode laser system that is suitable for frequency-domain cold-atom velocimetry and measurements of gravitational acceleration. The laser system is frequency stabilized using a modulation-free technique that lowers the temperature of a magneto-optical trap (MOT) in comparison with a MOT realized using a laser that relies on lock-in spectroscopy. The laser system also incorporates a feedback loop involving an acousto-optic modulator for intensity stabilization, which reduces the effect of low frequency vibrations. By integrating this laser with a home-built, dual-output radio frequency synthesizer, we are able to derive two laser beams with a precisely controlled relative detuning for frequency domain interferometry using laser-cooled atoms. The detuning can range from the mHz to the MHz level with a stability of 10 μHz.

Review of Scientific Instruments•Dec 1, 2025•1 citation
A sub-MHz frequency stability of the laser is crucial in the quantum-atom experiment where precise atomic transition is required for control and manipulation of atom like in the atom quantum computing. In this work, we have built the frequency stabilization system for the lasers used in our cold Rubidium atom experiment in the magneto-optical trap (MOT) and the optical tweezers. We utilized a Rubidium vapour glass cell as a frequency reference, which provides atomically absolute reference point with low complexity setup. By mean of the absorption of the laser beam by the Rubidium vapour, the saturated absorption spectroscopy (SAS) experiment was setup to produce the D2 line spectra. The acousto-optic modulator (AOM) was used to sinusoidally dither the laser frequency and consequently the resonance peaks in the spectra. Detailing in this work, the AOM sinusoidal dithering and the dithered SAS signal had orthogonality and were processed together to produce the error signal used to stabilize the laser frequency to the resonant peak. This frequency stabilization system achieved the frequency standard deviation below 0.80 MHz over up to 8 min 00 period. The system also allowed for stabilized frequency tunability over a range of 55 - 60 MHz about the target resonance peak. This performance is significant for stabilizing the lasers in the MOT experiment and related quantum-atom research.
In this study, a miniature laser frequency stabilization module for cold atom sensing applications was designed and realized.The module can lock the laser frequency to the saturated absorption spectrum of the D2 line of rubidium (Rb) atoms using the frequency modulation spectroscopy method.The module core is a tiny Rb cell, co-packaged with the saturation absorption optical setup, temperature control circuit, and detection circuit through a joint optical-mechanical-electrical design for a total volume of only 40 mm × 15 mm × 30 mm.The frequency fluctuation of the 780 nm laser after frequency stabilization by the module was within 1 MHz over 1000 s, which is adequate for magneto-optical trap experiments.The results verify the feasibility of the module as a frequency reference and provide a light source for portable cold atom sensing devices.
Precise laser stabilization is a fundamental aspect of modern metrology, directly influencing the accuracy of fundamental measurements in fields such as high-precision metrology, atomic sensor applications, and quantum technologies. Saturation absorption spectroscopy (SAS) is one of the most effective techniques for achieving high spectral stability, as it enables laser frequencies to be locked to atomic resonances. This technique exploits the nonlinear interaction between a weaker probe beam and a stronger pump beam within a rubidium (Rb) atomic vapor cell. By eliminating Doppler broadening, SAS allows well-defined hyperfine transitions to be resolved, providing a reliable optical frequency reference. This study aims to optimize laser frequency stabilization using the SAS technique by investigating the effects of laser light polarization, atomic vapor cell temperature, and pump-probe power adjustments. Polarization-dependent selection rules influence transition probabilities, thereby affecting spectral contrast and frequency stability. Additionally, atomic density variations, which depend on the vapor cell temperature, influence signal strength and linewidth, necessitating precise temperature control for optimal performance. Furthermore, the pump power must be sufficient to induce saturation without excessive power broadening, while the probe power must remain low enough to prevent spectral line distortion. By optimizing polarization, temperature, and power parameters, the stabilization of the Rb atomic laser can be enhanced, leading to improved reproducibility and consistency in high-precision measurements. SAS-based laser stabilization is particularly crucial for atomic sensor applications and quantum technologies, where highly stable, narrow-linewidth lasers are essential for precision measurements. Applications such as atomic magnetometers, gyroscopes, and inertial navigation systems depend on precisely stabilized lasers for optimal performance. By enhancing the reliability of laser frequency stabilization, this work contributes to the advancement of next-generation atomic sensors with improved sensitivity and stability.
Abstract In optical systems, acousto-optic modulators (AOMs) and electro-optic modulators (EOMs) are commonly utilized for laser frequency manipulation. However, these devices come with drawbacks such as high cost and the requirement of optical adjustments to change the frequency shift direction. In this study, we propose an alternative method that harnesses the Zeeman effect in the saturated-absorption spectroscopy to shift the energy levels in atom. With this technique, the laser frequency can be shifted without the need for AOMs or EOMs. The stability of laser locking was investigated for any case of polarization of probe and pump beam. We found when the polarization of the probe and pump beams is linear and perpendicular, it results in the highest level of stability in laser locking compared to other polarization configurations.
We describe an inexpensive lock-in amplifier that can be built using discrete off-the-shelf RF components and home-built analog circuits. This lock-in has been used in a feedback loop to lock the frequency of a laser to an atomic transition. The frequency stability was tested by trapping rubidium atoms. The feedback loop involves obtaining a modulated saturated absorption signal from a vapor cell using an acousto-optic modulator to modulate the laser frequency. The absorption signal is sent to the lock-in to generate an error signal, proportional to the first derivative of the absorption, which is fed back to the laser to complete the feedback loop. We also demonstrate a simplified optical setup for viewing the saturated absorption spectrum. In this case, the signal consists of narrow saturated absorption spectra riding on top of a Doppler-broadened pedestal. We show that it is possible to greatly reduce the effect of this background and lock the laser to the atomic resonance by modifying the home-built lock-in to generate an error signal proportional to the third derivative of the absorption. The results of this work can be adapted for advanced undergraduate laboratory work.PACS Nos.: 01.50Pa, 07.50.–e, 42.62Fi, 42.60Fc
The utilization of atomic or molecular spectroscopy for frequency locking of single-frequency laser to improve laser frequency stability plays an important role in the experimental investigation of optically pumped atomic magnetometers, atomic clocks, laser cooling and trapping of atoms, etc. We have experimentally demonstrated a technique for frequency stabilization of a single-frequency laser employing the bright state spectroscopy (BSS) with a rubidium atomic vapor cell. By utilizing the counter-propagating dual-frequency 795 nm laser beams with mutually orthogonal linear polarization and a frequency difference of 6.834 GHz, which is equal to the hyperfine splitting of rubidium-87 ground state 5S1/2, an absorption-enhanced signal with narrow linewidth at the center of Doppler-broadened transmission spectroscopy is observed when continuous scanning the laser frequency over rubidium-87 D1 transition. This is the so-called BSS. Amplitude of the absorption-enhanced signal in the BSS is much larger compared with the conventional saturation absorption spectroscopy (SAS). The relationship between linewidth and amplitude of the BSS signal and laser beam intensity has been investigated. This high-contrast absorption-enhanced BSS signal has been employed for the laser frequency stabilization. The experimental results show that the frequency stability is 4.4×10−11 with an integration time of 40 s, near one order of magnitude better than that for using the SAS.
We discuss the characterization and specifications of a home-built external cavity diode laser system that is suitable for frequency-domain cold-atom velocimetry and measurements of gravitational acceleration. The laser system is frequency stabilized using a modulation-free technique that lowers the temperature of a magneto-optical trap (MOT) in comparison with a MOT realized using a laser that relies on lock-in spectroscopy. The laser system also incorporates a feedback loop involving an acousto-optic modulator for intensity stabilization, which reduces the effect of low frequency vibrations. By integrating this laser with a home-built, dual-output radio frequency synthesizer, we are able to derive two laser beams with a precisely controlled relative detuning for frequency domain interferometry using laser-cooled atoms. The detuning can range from the mHz to the MHz level with a stability of 10 μHz.