Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

Compact strontium atomic beam source based on a two-dimensional grating magneto-optical trap

Hyun Gyung Lee, Young‐Ho Park, Chang Yong Park, Meung Ho Seo, Hyun-Gue Hong, Sang-Bum Lee, Taeg Yong Kwon, Seji Kang, Sangwon Seo, Sang Eon Park, Jongcheol Park, Yeeun Na, Il‐Suk Kang, Jae Hoon Lee

Published Sep 19, 2025• 4 citations
Publisher

Abstract

We present a two-dimensional grating magneto-optical trap (2D gMOT) for strontium, which produces a slow atomic beam in a compact form factor. The strontium 2D gMOT, using permanent magnets with an atomic dispenser, cools and traps atoms along two dimensions in the diffraction plane of a grating chip using the 1 S 0 → 1 P 1 (blue) transition. The system is configured in such a way that the atoms emitted from the dispenser source do not degrade the diffraction efficiency of the grating for long-term stable use. The performance of the 2D gMOT is analyzed with plug and probe beams, where the atomic source achieves a flux of 2.1 × 10 8 atoms/s and mean velocity of 6.4 m/s for an input laser power of 75 mW. The velocity measurement allows for the precise characterization of atom-photon scattering properties, showing that the compact 2D gMOT is suitable for portable quantum devices such as atomic clocks, quantum sensors, and precision spectroscopy.

DOI
10.1103/htx8-dr68

Related papers

Two-dimensional grating magneto-optical trap

Eric Imhof, Benjamin Stuhl, Brian L. Kasch +3 more

We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using $^{87}\mathrm{Rb}$. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.

arXiv:1703.07926•Physical Review A•Sep 29, 2017•52 citations

A compact high-flux grating chip cold atom source

Hendrik Heine, Aidan S. Arnold, Melanie S Le Gonidec +4 more

Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.

arXiv:2406.10102•New Journal of Physics•Mar 1, 2025•9 citations

Design and optimization of grating chip for compact magneto-optical trap

Jing Dong, Xiao‐Kuan Li, Wei Li

Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Two-Color Grating Magneto-Optical Trap for Narrow-Line Laser Cooling

Saskia Bondza, Christian Lisdat, Stefanie Kroker +1 more

We demonstrate the two-color cooling and trapping of alkaline-earth atoms in a grating magneto-optical trap (GMOT). The trap is formed by a single incident laser beam together with four secondary beams that are generated via diffraction from a nanostructured wafer. A grating structure for a GMOT operating with strontium atoms is optimized and fabricated. We trap ${10}^{6}{\phantom{\rule{0.2em}{0ex}}}^{88}\mathrm{Sr}$ atoms on the ${}^{1}{S}_{0}{\ensuremath{\rightarrow}}^{1}{P}_{1}$ transition at $461\phantom{\rule{0.2em}{0ex}}\mathrm{nm}$ and transfer 25% of these atoms to the second cooling stage on the narrower ${}^{1}{S}_{0}{\ensuremath{\rightarrow}}^{3}{P}_{1}$ intercombination transition at $689\phantom{\rule{0.2em}{0ex}}\mathrm{nm}$, preparing a sample of $2.5\ifmmode\times\else\texttimes\fi{}{10}^{5}$ atoms at $5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. These results demonstrate the applicability of the GMOT technology in conjunction with two widely differing wavelengths and enable the continued miniaturization of alkaline-earth-based quantum technologies like optical atomic clocks.

arXiv:2112.08833•Physical Review Applied•Apr 1, 2022•30 citations

Confinement of an alkaline-earth element in a grating magneto-optical trap

Ananya Sitaram, Peter K. Elgee, Gretchen K. Campbell +3 more

We demonstrate a compact magneto-optical trap (MOT) of alkaline-earth atoms using a nanofabricated diffraction grating chip. A single input laser beam, resonant with the broad 1S0 → 1P1 transition of strontium, forms the MOT in combination with three diffracted beams from the grating chip and a magnetic field produced by permanent magnets. A differential pumping tube limits the effect of the heated, effusive source on the background pressure in the trapping region. The system has a total volume of around 2.4 l. With our setup, we have trapped up to 5 × 106 88Sr atoms at a temperature of ∼6 mK, and with a trap lifetime of ∼1 s. Our results will aid the effort to miniaturize quantum technologies based on alkaline-earth atoms.

arXiv:2006.05369•Review of Scientific Instruments•Oct 1, 2020•46 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations
We present a two-dimensional grating magneto-optical trap (2D gMOT) for strontium, which produces a slow atomic beam in a compact form factor. The strontium 2D gMOT, using permanent magnets with an atomic dispenser, cools and traps atoms along two dimensions in the diffraction plane of a grating chip using the 1 S 0 → 1 P 1 (blue) transition. The system is configured in such a way that the atoms emitted from the dispenser source do not degrade the diffraction efficiency of the grating for long-term stable use. The performance of the 2D gMOT is analyzed with plug and probe beams, where the atomic source achieves a flux of 2.1 × 10 8 atoms/s and mean velocity of 6.4 m/s for an input laser power of 75 mW. The velocity measurement allows for the precise characterization of atom-photon scattering properties, showing that the compact 2D gMOT is suitable for portable quantum devices such as atomic clocks, quantum sensors, and precision spectroscopy.
We demonstrate a two-dimensional (2D) grating magneto-optical trap (GMOT) with a single input cooling laser beam and a planar diffraction grating using 87Rb^{87}\mathrm{Rb}87Rb. This configuration increases experimental access when compared with a traditional 2D magneto-optical trap (MOT). As described in the paper, the output flux is several hundred million rubidium atoms/s at a mean velocity of 16.5(9) m/s and a velocity distribution of 4(3) m/s standard deviation. We use the atomic beam from the 2D GMOT to demonstrate loading of a three-dimensional (3D) GMOT with $2.46(7)\ifmmode\times\else\texttimes\fi{}{10}^{8}$ atoms. Methods to improve output flux are discussed.
Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
We demonstrate the two-color cooling and trapping of alkaline-earth atoms in a grating magneto-optical trap (GMOT). The trap is formed by a single incident laser beam together with four secondary beams that are generated via diffraction from a nanostructured wafer. A grating structure for a GMOT operating with strontium atoms is optimized and fabricated. We trap 10688Sr{10}^{6}{\phantom{\rule{0.2em}{0ex}}}^{88}\mathrm{Sr}10688Sr atoms on the ${}^{1}{S}_{0}{\ensuremath{\rightarrow}}^{1}{P}_{1}$ transition at 461nm461\phantom{\rule{0.2em}{0ex}}\mathrm{nm}461nm and transfer 25% of these atoms to the second cooling stage on the narrower ${}^{1}{S}_{0}{\ensuremath{\rightarrow}}^{3}{P}_{1}$ intercombination transition at 689nm689\phantom{\rule{0.2em}{0ex}}\mathrm{nm}689nm, preparing a sample of $2.5\ifmmode\times\else\texttimes\fi{}{10}^{5}$ atoms at $5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. These results demonstrate the applicability of the GMOT technology in conjunction with two widely differing wavelengths and enable the continued miniaturization of alkaline-earth-based quantum technologies like optical atomic clocks.
We demonstrate a compact magneto-optical trap (MOT) of alkaline-earth atoms using a nanofabricated diffraction grating chip. A single input laser beam, resonant with the broad 1S0 → 1P1 transition of strontium, forms the MOT in combination with three diffracted beams from the grating chip and a magnetic field produced by permanent magnets. A differential pumping tube limits the effect of the heated, effusive source on the background pressure in the trapping region. The system has a total volume of around 2.4 l. With our setup, we have trapped up to 5 × 106 88Sr atoms at a temperature of ∼6 mK, and with a trap lifetime of ∼1 s. Our results will aid the effort to miniaturize quantum technologies based on alkaline-earth atoms.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.