Quantum key distribution (QKD) networks offer scalable secure communication, while efficient integration with existing optical infrastructure requires careful consideration. This paper investigates enhancing the security of multipath QKD over multi-band systems by exploring the trade-offs between multi-band separation and multipath techniques. A novel, to our knowledge, framework, incorporating blocking ratio analysis for a single and multipath QKD, is proposed, comparing bitwise product and concatenated key generation methods. Our model considers propagation delays and key pool synchronization’s impact on the secret key rate (SKR). Our simulations using a U.S. long-haul network model demonstrate significant benefits of implementing QKD in alternative spectral bands. The results show substantial improvements in SKR at various span lengths in single-path scenarios. Additionally, increasing the number of quantum channels led to noticeable reductions in network blocking rates, enabling higher classical traffic loads throughout the network infrastructure. We introduce, to our knowledge, new KPIs: the blocking rate ( B CQ ) and a comprehensive security rate ( C ), assessing the final key’s overall secrecy. For multipath schemes, simulations reveal that concatenated multipath QKD, while exhibiting a superior blocking rate, showed 12% less compromised secrecy at 4000 km (32% to 20%), compared to less than 10% for bitwise product multipath QKD under the same conditions. These findings provide valuable insights into designing efficient and secure quantum-enhanced optical networks, highlighting the complex interplay between security and efficiency in multipath QKD architectures.
Quantum key distribution (QKD) networks offer scalable secure communication, while efficient integration with existing optical infrastructure requires careful consideration. This paper investigates enhancing the security of multipath QKD over multi-band systems by exploring the trade-offs between multi-band separation and multipath techniques. A novel, to our knowledge, framework, incorporating blocking ratio analysis for a single and multipath QKD, is proposed, comparing bitwise product and concatenated key generation methods. Our model considers propagation delays and key pool synchronization’s impact on the secret key rate (SKR). Our simulations using a U.S. long-haul network model demonstrate significant benefits of implementing QKD in alternative spectral bands. The results show substantial improvements in SKR at various span lengths in single-path scenarios. Additionally, increasing the number of quantum channels led to noticeable reductions in network blocking rates, enabling higher classical traffic loads throughout the network infrastructure. We introduce, to our knowledge, new KPIs: the blocking rate ( B CQ ) and a comprehensive security rate ( C ), assessing the final key’s overall secrecy. For multipath schemes, simulations reveal that concatenated multipath QKD, while exhibiting a superior blocking rate, showed 12% less compromised secrecy at 4000 km (32% to 20%), compared to less than 10% for bitwise product multipath QKD under the same conditions. These findings provide valuable insights into designing efficient and secure quantum-enhanced optical networks, highlighting the complex interplay between security and efficiency in multipath QKD architectures.
The increasing demand for secure communication makes quantum key distribution (QKD) a compelling technology, as it exploits the fundamental principles of quantum physics to enhance secure data transmission. However, practical deployment faces limitations such as limited transmission distances and dedicated hardware-channel requirements. This paper proposes a linear programming-based model that jointly addresses routing, wavelength assignment, and trusted-node minimization in QKD networks with wavelength division multiplexing (WDM), considering that the secret key rate becomes impractical beyond a given transmission distance, thus requiring the relaying of secret keys through trusted repeaters. In particular, the study contrasts scenarios where traffic is concentrated along a single route with those where key rates are split and routed over multiple nonoverlapping paths (MNOPs) using two mechanisms: Concatenate Multipart (CM) and Bitwise Product Multipath (BPM). While the literature shows that MNOPs can improve security (BPM) and improve the secret key rate (CM), we demonstrate that these mechanisms come with additional deployment costs.
Quantum key distribution (QKD) revolutionizes secure communication, offering unbreakable cryptography against quantum computers’ rising computational power. This paper explores the placement of trusted nodes to enhance the efficiency of quantum communication networks. Two practical scenarios are investigated: the multi-band (MB) setting, utilizing different wavelength bands for QKD and classical systems, and the multifiber (MF) solution, employing separate fibers for QKD and classical communication. The study optimizes secret key rate (SKR) per quantum transmitter and receiver (Q-TRx) in metro quantum-optical networks. A heuristic algorithm, considering noise sources and fiber attenuation, is proposed for routing, modulation, spectrum, and time assignment. The simulations conducted on various network topologies reveal optimal QKD trusted node distances (QTND) and wavelengths place. The simulation results indicate that the optimal QTND value for the MB-scenario and MF-scenario is 20 and 25 km, respectively. Compared to scenarios without QKD trusted node placement along the 40 km link, both the MB-scenario and MF-scenario exhibit 40% and 15% improvements, respectively, in SKR/QTRx relative to their optimal QTND values.
Quantum Key Distribution (QKD) enables information-theoretic secure key exchange, but the deployment of large-scale QKD networks introduces new challenges related to routing, resource allocation, and security exposure in trusted-node-based architectures. In multipath QKD networks, the secret key rate can be partitioned and transmitted over multiple link-disjoint paths, so that an adversary must simultaneously compromise all paths to reconstruct the complete secret key. However, traffic is often equally distributed across the available disjoint paths, although such uniform partitioning may be suboptimal when candidate paths exhibit heterogeneous vulnerability levels. This paper proposes a security-aware optimization framework for QKD-enabled optical networks that determines a non-uniform multipath traffic partitioning strategy aimed at minimizing the expected amount of eavesdropped traffic. The proposed approach is formulated as a Mixed-Integer Linear Programming (MILP) model that integrates probabilistic secrecy metrics derived from trusted node compromise probabilities, a traffic vulnerability threshold that limits partial information exposure, and adaptive bandwidth squeezing protection to ensure service continuity under failure scenarios. The model jointly optimizes traffic allocation and excess key capacity, allowing the protection overhead to be dynamically determined according to security and resilience requirements. Numerical evaluations conducted on both a toy topology and the Pan-European network demonstrate that the proposed exposure-aware partitioning strategy significantly reduces the expected eavesdropped traffic compared to conventional equal-splitting approaches while maintaining resilience guarantees. These results highlight the potential of security-driven traffic engineering for the design of resilient and efficient multipath QKD networks.
Background: Quantum Key Distribution (QKD( is a promising technology for secure communication, leveraging the principles of quantum mechanics to provide theoretically unbreakable encryption. With the exponential growth in data traffic and the increasing need for secure communication in backbone fiber networks, integrating high-bit-rate multiplexing techniques into QKD systems can enhance their efficiency and scalability. Problem: Traditional QKD systems face limitations in terms of data rate and network scalability, particularly in high-capacity optical communication networks. As data demands increase, there is a critical need for methods that can support high-bit-rate multiplexing while maintaining the security and performance of QKD. Method: This study proposes a novel QKD approach using high-bit-rate multiplexing in backbone fiber networks. The method involves encoding quantum keys using multiple optical channels simultaneously to increase the data throughput of the QKD system. We employ a combination of time-division multiplexing (TDM( and wavelength-division multiplexing (WDM( to optimize the use of fiber resources and enhance key distribution rates. Results: Simulation results demonstrate that the proposed method achieves a key distribution rate of 10 Mbps over a 200 km fiber link with a quantum bit error rate (QBER( of 1.5%. This represents a 50% improvement in key rate compared to conventional QKD systems without multiplexing. Additionally, the method shows enhanced scalability and network utilization, supporting up to 16 multiplexed channels with minimal impact on security.
As the limitations of classical cryptographic systems become increasingly evident in the face of advancing quantum algorithms, Quantum Key Distribution (QKD) emerges as a vital paradigm for securing information in next-generation networks. This paper explores the theoretical foundations and protocol architectures underpinning QKD, including BB84, E91, and newer hybrid approaches designed for scalable integration into existing infrastructures. Performance metrics such as key generation rate, error thresholds, and resistance to various attack models are critically examined across both fiber-optic and free-space implementations. Furthermore, the study delves into real-world deployment challenges—ranging from synchronization errors and quantum channel noise to cost-efficiency and interoperability with classical systems. By offering a comparative analysis and proposing optimization strategies, this work aims to pave the way for robust quantum-secure communication protocols suited for large-scale, heterogeneous network environments.
We explore the interplay between security and key rate of a quantum key distribution (QKD) protocol. This fundamental trade-off is investigated both at the link layer, i.e., for a QKD protocol implemented on a channel, and at the network layer, i.e., within the context of a multiuser multihop communication network. In the former scenario, we consider both discrete- and continuous-variable protocols in the composable finite-size framework, showing how their epsilon security restricts the key rate achievable on a single fiber link under various assumptions for the process of parameter estimation. In the latter scenario, we analyze the impact of composable security in the network setting, studying the interplay between end-to-end (ETE) epsilon security and ETE key rate for arbitrarily chosen remote end points. Starting from basic topologies to more complex ones, such as perturbed lattices, we analyze this trade-off under different types of routing strategies. In multipath routing, a greater number of paths can improve key rates, but this enhancement is accompanied by a reduction in the ETE security level. In the setting of single-path routing, we introduce a modified Dijkstra algorithm, which we call “lambda protocol,” able to optimize route construction depending on the joint ETE demand for security and rate. Our results are first derived for specific network instances (i.e., fixed topologies within a given network class) and subsequently extended to ensemble averages over entire network classes, where phase transitions are revealed with respect to node connectivity.