Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Electronics Symposium (IES)

RSS Signal Processing for Secret Key Generation: A Comparison of Kalman Filtering and Quantization in Indoor Environments

Rahmadani Najwa Alfriza, Mike Yuliana, Nailul Muna

Published Aug 5, 2025• 0 citations
Publisher

Abstract

Received Signal Strength (RSS) is a parameter that is widely used in physical layer security systems because of its reciprocal and spatially decorrelated nature. However, RSS values fluctuate, so they require pre-processing before they can be used for reliable secret key generation. This study evaluates the effectiveness of combining Kalman filtering with two quantization methods, Jana multi-bit and multi-bit quantization, on the difference in signal strength (DOSS) data obtained from indoor environments. Testing is carried out by comparing the performance of the Key Generation Rate (KGR) and Key Disagreement Rate (KDR) as indicators of bitstream quality. The experimental results show that the combination of Kalman filtering and multi-bit quantization produces the best performance with a KDR as low as 1% and a KGR of 3.67 kbit/s. In contrast, the Jana multi-bit method without Kalman produces a higher KGR but with a much larger KDR. This finding confirms that quantization strategies-especially multi-bit ones-are critical in improving RSS-based bit quality even before the key generation stage is entirely performed.

DOI
10.1109/ies67184.2025.11162056

Related papers

Performance Evaluation of Secret Key Generation System for Static and Dynamic Condition

Suwadi Suwadi, Wirawan Wirawan, Mike Yuliana

Received signal strength as one of the physical layer characteristics has been proven to be extracted as a secret key to secure communications carried out by two legitimate parties. Some of the previous secret key generation systems had low key generation speed and were indicated by the key generation value parameter and high bit difference indicated by the key disagreement value parameter. This paper proposes a system that can improve the similarity of RSS between legitimate parties by adding the Kalman Filter pre-process method. The increase in the similarity of received signal strength will be followed by a decrease in the difference in bits obtained so that it will reduce the number of bits wasted in the error-correcting component and will automatically increase the key generation value. The performance evaluation of the built system will be tested in an indoor environment with several scenarios and conditions. There are 2 scenarios used, namely the scenario in the classroom and laboratory and each of them has 2 conditions, namely static and dynamic. The test results show that the best performance is obtained when the Cl scenario and static condition with the key disagreement value of 0.41 and key generation value of 6.48 bps. The proposed system also shows better performance in terms of key disagreement value and key generation value compared to the previous system.

IEEE International Conference on Communication, Networks and Satellite (COMNETSAT)•Dec 17, 2020•4 citations

Performance Improvement of Secret Key Generation Scheme in Wireless Indoor Environment

Mike Yuliana, Wirawan, Suwadi

The Secret Key Generation (SKG) scheme that exploits the reciprocity and uniqueness of wireless channel between two users plays a significant part in a new increasing distributed security system. The scheme performance can be distinguished based on the low value of Key disagreement Rate (KDR), the high value of Key Generation Rate (KGR), as well as the fulfillment of the NIST randomness standard. The previous SKG scheme has a high KDR due to a direct quantization of a measurement result of the Received Signal Strength (RSS). To overcome the above issue, we conduct a pre-processing of measurement result before quantization with the Kalman method. The pre-process is carried out to improve the channel reciprocity between two legitimate users with the objective to reduce the bit mismatch. Through an experiment, we propose a new quantization scheme called a Modified Multi-Bit (MMB) that uses a multi-bit system on every level of quantization. The test results show that the proposed combination of preprocessing and the MMB scheme has a better performance compared to the existing schemes in terms of KDR and KGR. The Secret Key generated by our scheme also fulfills the NIST randomness standard.

International Journal of Communication Networks and Information Security (IJCNIS)•Apr 17, 2022•20 citations

Performance Enhancement of RSS-Based Secret Key Generation using Lightweight Minimal Bit Syndrome Reconciliation Method for IoT Devices

Choirun Nisa, M. Cahyo Kriswantoro

Secure communication in Internet of Things (IoT) devices can be improved through physical-layer secret key generation. In secret key generation, an information reconciliation process is required to match the bit sequences between the two communicating devices. However, this process often involves complex statistical computations that increase system overhead and require the transmission of bits over an insecure public channel. Therefore, this research presents a lightweight reconciliation algorithm based on minimal bit syndrome to reduce overhead and improve key security. The proposed method processes quantized Received Signal Strength (RSS) values into 8-bit block syndrome-based reconciliation mechanism and only the 8-bit syndromes from mismatched block are transmitted over the public channel. System testing was conducted under both static and dynamic scenarios in an indoor area using Raspberry Pi nodes. The results show that the proposed scheme demonstrates an improvement in the Key Generation Rate (KGR) by 2.2% and reduces the processing time by 11.6% in dynamic scenario and 8.3% in the static scenario. Also, the proposed scheme reduce the quantization and reconciliation time by 50% compared to previous research. Furthermore, the proposed method maintained a Key Disagreement Rate (KDR) of 0% across all block size and successfully passed the NIST randomness and complexity test, with all test parameters achieving p-values above 0.01. These result indicate that the proposed scheme improve the performance of existing secret key generation methods and it is suitable for implementation in IoT devices.

Telekontran Jurnal Ilmiah Telekomunikasi Kendali dan Elektronika Terapan•Oct 1, 2025•0 citations

RSS-based Secret Key Establishment using Middle-Point Quantization and Clover Filter Algorithm

Choirun Nisa, Amang Sudarsono, Mike Yuliana

In recent years, the Internet of Things (IoT) becomes popular technology. The one aspect that makes important concern in IoT is the confidentiality of communications. For securing communication in IoT, cryptography algorithm such as symmetrical cryptography requires the secret key exchange process in a public wireless network to ensure the sameness of the secret key. However, the exchange of secret keys in the public wireless network can be exploited by adversaries. So, we present the secret key generation scheme that generates a shared random key through observation of the communication channel parameter i.e. Receive Signal Strength (RSS) between two devices that no need to exchange the secret key. We use Middle-Point quantization to convert the RSS into bit sequences and use Clover Filter to eliminate the error bits after the quantization process. Measurement results showed that the proposed scheme improves the performance of existing schemes if the interval used is 25. The proposed scheme improves the KGR 24 times and improves efficiency to 63%. While for KDR, the proposed scheme can decrease the KDR value of 67.9%. Also, in all scenarios, the proposed scheme can pass the NIST randomness test.

International Electronics Symposium (IES)•Sep 1, 2020•1 citation

Performance evaluation of the key extraction schemes in wireless indoor environment

Mike Yuliana, Wirawan Wirawan, Suwadi Suwadi

Shared key generation between two users to exploit the randomness of wireless channels as a source of secret key bits extraction has become an attractive alternative to ensure security in a mobile environment. In this paper, we evaluate the performance of key extraction scheme using measurement results of Received Signal Strength (RSS) on several variations of settings and types of movement. We add the moving average method before the quantization process so our scheme becomes more adaptive to the low variation of RSS, and the use of modified Level Crossing Algorithm to reduce Key Disagreement Rate (KDR) due to half-duplex mode, device limitation, and different types of devices. The results show that our proposed schemes, compared with the existing scheme produce bit stream with the highest entropy, a significant decrease of KDR and passed randomness test from NIST statistical suite.

IEEE International Conference on Signals and Systems (ICSigSys)•May 1, 2017•20 citations

Performance Analysis of Loss Multilevel Quantization on the Secret Key Generation Scheme in Indoor Wireless Environment

Mike Yuliana, Wirawan Wirawan, Suwadi Suwadi

The necessity for secured communication devices that has limited computing power has encouraged the development of key generation scheme. The generation of a symmetric key scheme that utilizes randomness of wireless channels offers a most promising solution as a result of the easy distribution of secret key mechanisms. In the last few years, various schemes have been proposed, but there are trade-offs between the performance parameters used. The expected parameters are the low Key Disagreement Rate (KDR), the high Key Generation Rate (KGR), and the fulfillment of standard of randomness. In this paper, we propose the use of a combination of pre-processing methods with multilevel lossy quantization to overcome the trade-off of performance parameters of the Secret Key Generation (SKG) scheme. Pre-process method used to improve reciprocity so as to reduce KDR, whereas multilevel quantization is used to improve the KGR. We use Kalman as the pre-processing method and Adaptive Quantization, Modified Multi-Bit (MMB), and 2-ary Quantization as the multilevel lossy quantization. Testing is conducted by comparing the performance between direct quantization with the addition of the pre-processing method in various multilevel lossy quantization schemes. The test results show that the use of Kalman as pre-processing methods and multilevel lossy quantization can overcome the trade-off performance parameters by reducing KDR and increasing KGR, with the best performance, was obtained when we use adaptive quantization. The resulting secret key has also fulfilled 6 random tests with p values greater than 0.01.

International Journal on Advanced Science Engineering and Information Technology•Jan 17, 2019•20 citations
Received Signal Strength (RSS) is a parameter that is widely used in physical layer security systems because of its reciprocal and spatially decorrelated nature. However, RSS values fluctuate, so they require pre-processing before they can be used for reliable secret key generation. This study evaluates the effectiveness of combining Kalman filtering with two quantization methods, Jana multi-bit and multi-bit quantization, on the difference in signal strength (DOSS) data obtained from indoor environments. Testing is carried out by comparing the performance of the Key Generation Rate (KGR) and Key Disagreement Rate (KDR) as indicators of bitstream quality. The experimental results show that the combination of Kalman filtering and multi-bit quantization produces the best performance with a KDR as low as 1% and a KGR of 3.67 kbit/s. In contrast, the Jana multi-bit method without Kalman produces a higher KGR but with a much larger KDR. This finding confirms that quantization strategies-especially multi-bit ones-are critical in improving RSS-based bit quality even before the key generation stage is entirely performed.
Received signal strength as one of the physical layer characteristics has been proven to be extracted as a secret key to secure communications carried out by two legitimate parties. Some of the previous secret key generation systems had low key generation speed and were indicated by the key generation value parameter and high bit difference indicated by the key disagreement value parameter. This paper proposes a system that can improve the similarity of RSS between legitimate parties by adding the Kalman Filter pre-process method. The increase in the similarity of received signal strength will be followed by a decrease in the difference in bits obtained so that it will reduce the number of bits wasted in the error-correcting component and will automatically increase the key generation value. The performance evaluation of the built system will be tested in an indoor environment with several scenarios and conditions. There are 2 scenarios used, namely the scenario in the classroom and laboratory and each of them has 2 conditions, namely static and dynamic. The test results show that the best performance is obtained when the Cl scenario and static condition with the key disagreement value of 0.41 and key generation value of 6.48 bps. The proposed system also shows better performance in terms of key disagreement value and key generation value compared to the previous system.
The Secret Key Generation (SKG) scheme that exploits the reciprocity and uniqueness of wireless channel between two users plays a significant part in a new increasing distributed security system. The scheme performance can be distinguished based on the low value of Key disagreement Rate (KDR), the high value of Key Generation Rate (KGR), as well as the fulfillment of the NIST randomness standard. The previous SKG scheme has a high KDR due to a direct quantization of a measurement result of the Received Signal Strength (RSS). To overcome the above issue, we conduct a pre-processing of measurement result before quantization with the Kalman method. The pre-process is carried out to improve the channel reciprocity between two legitimate users with the objective to reduce the bit mismatch. Through an experiment, we propose a new quantization scheme called a Modified Multi-Bit (MMB) that uses a multi-bit system on every level of quantization. The test results show that the proposed combination of preprocessing and the MMB scheme has a better performance compared to the existing schemes in terms of KDR and KGR. The Secret Key generated by our scheme also fulfills the NIST randomness standard.
Secure communication in Internet of Things (IoT) devices can be improved through physical-layer secret key generation. In secret key generation, an information reconciliation process is required to match the bit sequences between the two communicating devices. However, this process often involves complex statistical computations that increase system overhead and require the transmission of bits over an insecure public channel. Therefore, this research presents a lightweight reconciliation algorithm based on minimal bit syndrome to reduce overhead and improve key security. The proposed method processes quantized Received Signal Strength (RSS) values into 8-bit block syndrome-based reconciliation mechanism and only the 8-bit syndromes from mismatched block are transmitted over the public channel. System testing was conducted under both static and dynamic scenarios in an indoor area using Raspberry Pi nodes. The results show that the proposed scheme demonstrates an improvement in the Key Generation Rate (KGR) by 2.2% and reduces the processing time by 11.6% in dynamic scenario and 8.3% in the static scenario. Also, the proposed scheme reduce the quantization and reconciliation time by 50% compared to previous research. Furthermore, the proposed method maintained a Key Disagreement Rate (KDR) of 0% across all block size and successfully passed the NIST randomness and complexity test, with all test parameters achieving p-values above 0.01. These result indicate that the proposed scheme improve the performance of existing secret key generation methods and it is suitable for implementation in IoT devices.
In recent years, the Internet of Things (IoT) becomes popular technology. The one aspect that makes important concern in IoT is the confidentiality of communications. For securing communication in IoT, cryptography algorithm such as symmetrical cryptography requires the secret key exchange process in a public wireless network to ensure the sameness of the secret key. However, the exchange of secret keys in the public wireless network can be exploited by adversaries. So, we present the secret key generation scheme that generates a shared random key through observation of the communication channel parameter i.e. Receive Signal Strength (RSS) between two devices that no need to exchange the secret key. We use Middle-Point quantization to convert the RSS into bit sequences and use Clover Filter to eliminate the error bits after the quantization process. Measurement results showed that the proposed scheme improves the performance of existing schemes if the interval used is 25. The proposed scheme improves the KGR 24 times and improves efficiency to 63%. While for KDR, the proposed scheme can decrease the KDR value of 67.9%. Also, in all scenarios, the proposed scheme can pass the NIST randomness test.
Shared key generation between two users to exploit the randomness of wireless channels as a source of secret key bits extraction has become an attractive alternative to ensure security in a mobile environment. In this paper, we evaluate the performance of key extraction scheme using measurement results of Received Signal Strength (RSS) on several variations of settings and types of movement. We add the moving average method before the quantization process so our scheme becomes more adaptive to the low variation of RSS, and the use of modified Level Crossing Algorithm to reduce Key Disagreement Rate (KDR) due to half-duplex mode, device limitation, and different types of devices. The results show that our proposed schemes, compared with the existing scheme produce bit stream with the highest entropy, a significant decrease of KDR and passed randomness test from NIST statistical suite.
The necessity for secured communication devices that has limited computing power has encouraged the development of key generation scheme. The generation of a symmetric key scheme that utilizes randomness of wireless channels offers a most promising solution as a result of the easy distribution of secret key mechanisms. In the last few years, various schemes have been proposed, but there are trade-offs between the performance parameters used. The expected parameters are the low Key Disagreement Rate (KDR), the high Key Generation Rate (KGR), and the fulfillment of standard of randomness. In this paper, we propose the use of a combination of pre-processing methods with multilevel lossy quantization to overcome the trade-off of performance parameters of the Secret Key Generation (SKG) scheme. Pre-process method used to improve reciprocity so as to reduce KDR, whereas multilevel quantization is used to improve the KGR. We use Kalman as the pre-processing method and Adaptive Quantization, Modified Multi-Bit (MMB), and 2-ary Quantization as the multilevel lossy quantization. Testing is conducted by comparing the performance between direct quantization with the addition of the pre-processing method in various multilevel lossy quantization schemes. The test results show that the use of Kalman as pre-processing methods and multilevel lossy quantization can overcome the trade-off performance parameters by reducing KDR and increasing KGR, with the best performance, was obtained when we use adaptive quantization. The resulting secret key has also fulfilled 6 random tests with p values greater than 0.01.