Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ACS Photonics

Generation of Blue Electro-Optic Frequency Combs via a Four-Wave-Mixing Process in Rubidium Atomic Vapor

Roy Zektzer, Ashish Chanana, Khoi Tuan Hoang, Rahul Shrestha, David A. Long, Kartik A. Srinivasan

Published Jan 1, 2025• 2 citations
Publisher

Abstract

Electro-optic frequency combs (EO combs) enable high spectral and temporal resolution in atomic, molecular, and cavity-based spectroscopy that is at the heart of many quantum sensing applications. However, producing EO combs in the visible range remains challenging due to the limited availability of key components such as narrow-linewidth lasers and electro-optic phase modulators. Rubidium (Rb) is a highly nonlinear material that supports various four-wave mixing (4WM) processes, which are utilized for spectral translation and the generation of squeezed light. Here, we show the spectral translation of a 780 nm EO comb to 420 nm (a spectral separation of 330 THz) via a 4WM process in Rb vapor. We demonstrate the capability to extend the output comb bandwidth and signal-to-noise ratio by varying input power levels. Through this coherent process, we can generate frequency-agile combs in the blue, including a 1 kHz spaced comb with over one million individual comb teeth, of relevance for spectroscopic measurement of narrow-linewidth features such as electromagnetically induced transparency. Leveraging this approach across different 4WM interactions in Rb should allow for further wavelength conversion and the generation of correlated frequency combs, paving the way for sub-shot-noise (squeezed-light) measurements.

DOI
10.1021/acsphotonics.6c00470

Related papers

Nonlinear spectral translation and injection locking of electro-optic combs in light-atom interfaces

Roy Zektzer

We demonstrate injection locking of Fabry–Perot lasers to electro-optic (EO) frequency combs using comb powers as low as 1 nW, more than two orders of magnitude below the levels required for semiconductor optical amplification. This approach extends EO comb spectral translation from the telecom band to 780 nm via second-harmonic generation in silicon nitride microring resonators. We further generate EO combs at 420 nm by translating 780 nm combs through a four-wave-mixing process in rubidium vapor. Integrating these techniques paves the way toward chip-scale cascaded frequency conversion from the telecom band into the blue, providing compact and scalable light sources for quantum technologies.

Optical and Quantum Sensing and Precision Metrology II•Mar 5, 2026•0 citations

Development of an optical frequency comb around 1556 nm referenced to an Rb frequency standard at 778 nm

F. Ducos, Joachin Honthaas, O. Acef

To transfer and expand in the optical telecommunication range the accurate 5S1/2(F = 3) – 5D5/2 (F = 5) rubidium frequency reference at 778 nm (385.285 THz), we employ a second harmonic generation (SHG) process coupled to an optical frequency comb (OFC) both based on the use of a low power and narrow linewidth laser diode operating around 1556 nm. The Rb optical frequency reference is known with an accuracy of 2.6 × 10−12 and exhibits a frequency stability of 4 × 10−13τ−1/2, with a Flicker plateau of 2 × 10−14 for τ > 200 s. With 20 mW of laser power at 1556 nm, we perform a SHG process in a periodically poled lithium niobate (PPLN) crystal and we obtain 6.5 μW of harmonic radiation at 778 nm, used to phase lock the IR laser against a Rb optical frequency standard (OFS). This Rb-referenced fundamental radiation at 1556 nm is duplicated as 34 lines spaced by 10 GHz using an electro-optic phase modulator (EOM). This preliminary result is mainly limited by unexpected high optical losses in the Fabry Perot cavity, which comprises the EOM.

The European Physical Journal Applied Physics•Nov 15, 2002•11 citations

Nonlinear Frequency Translation in Micromachined Rb Vapor Cells

Heleni Krelman, Ori Nefesh, Liron Stern

The exceptional nonlinearity of alkali-metal vapors enables highly efficient nonlinear optical processes even at relatively low optical intensities. However, such processes have traditionally relied on centimeter-scale vapor cells. Here, we utilize a versatile chip-scale Rb vapor platform to generate coherent blue and mid-IR light in continuous-wave mode by means of resonant four-wave mixing. Optimized optical overlap with the atomic medium enables blue light generation of $\sim$20 $μ$W over a very short interaction length, while maintaining a directly measured linewidth of $\sim$1 MHz, which is presently limited by the measurement apparatus. Comparison with a conventional glassblown vapor cell further shows that the micromachined platform can achieve higher coherent blue-light generation efficiency despite its substantially shorter interaction length. Moreover, an anodically bonded Si window enables to detect coherent mid-IR emission with collected powers of $\sim$50 nW. We further characterize the temperature dependence and input-power scaling of the blue emission, confirming efficient nonlinear conversion within these compact vapor cells. This chip-scale platform provides a versatile foundation for a range of nonlinear optical functions, from precise wavelength references and quantum light sources to next-generation quantum sensors.

physics.opticsCross-listedarXiv:2605.01997•May 5, 2026•0 citations

Coherent 420 nm light generated by the cavity-enhanced four-wave mixing process in Rb vapor

Jinpeng Yuan, Hao Liu, Lirong Wang +2 more

We have generated a stable and continuously tunable single frequency (420 nm) coherent blue light (CBL) by the cavity-enhanced four-wave mixing process in Rb vapor. With the bow-tie-type ring cavity, the output power was 3.3 mW, two orders of magnitude higher than that of the CBL generated by the single-pass four-wave mixing process. The measured power stabilities of the 420 nm CBL operated at 2.5 mW and 1.5 mW for 1000 s were 2.89% and 1.88%, respectively. Under the scanning pump laser frequency, the continuously tunable range of the generated CBL reached 1.68 GHz without mode hopping. The measured beam qualities of the generated laser were M x 2 = 1.117 and M y 2 = 1.179 . The excellent performance of the 420 nm CBL was characterized by velocity transfer spectroscopy with 780 nm probe laser. This high quality short wavelength coherent light is potentially applicable to photon-atom interactions in quantum optics and fundamental research fields.

Optics Express•Jan 26, 2021•20 citations

Green to blue light conversion through resonant four wave mixing in rubidium vapor

Robert T. Randolph, Eric Finberg, Richard B. Miles

This work experimentally demonstrates the conversion of coherent and incoherent green 532 nm light to collimated blue 420 nm light through resonant four-wave mixing in rubidium vapor. The 532 nm light co-propagates with 795 nm and 1320 nm CW pump beams, simultaneously taking advantage of resonances between the 5 P, 10 S, 6 P and 5 S ground states of rubidium. Using a coherent green beam, the intensity of the collimated 420 nm signal is characterized under varying polarizations, cell temperatures, frequency detunings and pump intensities. A 2 d image is up-converted from green to blue light to extend the technique to spatially incoherent light. This excitation pathway has the potential to be used as a narrow linewidth ( < 1 GHz), tunable bandpass filter for lidar or other remote sensing applications. • Narrow linewidth of 532 nm signal up-converted to blue light using four wave mixing. • Demonstration of image up-conversion using hot Rb vapor. • A third applied IR pump beam increases conversion efficiency.

Optics & Laser Technology•Dec 22, 2025•0 citations

Towards Low-frequency Squeezed Light and Its Applications with Four-wave Mixing in Rubidium Vapor

Meng-Chang Wu

We study a variety of mechanisms that introduce noise into squeezed light generated by a four-wave mixing (4WM) process in Rb vapor. The noise from the seeding beam itself is a general noise that appears in any squeezed light generated from a seeding process. This noise dominates in the squeezed light at acoustic and lower measurement frequencies. A second excess noise source is observed in the twin beams pumped by either a diode laser system or a Ti:sapphire laser system. This excess noise is much stronger in the diode laser systems. It is present in the twin beams at measurement frequencies when the 4WM gain is reduced toward unity. Most of this excess noise can be removed with a dual-seeded 4WM scheme. A third noise source we examine is from a two-beam coupling that degrades the squeezing of the dual-seeded 4WM process at low frequencies of the order of the atomic transition linewidth. This noise can be avoided by seeding skew rays in the 4WM gain region. This gives us an insight to solve this "cross talk" problem by imaging the source in the 4WM gain region. In addition to studying noise sources, we propose a gain-independent calibration scheme that relies on higher order correlation function for the absolute calibration of photodiodes. Having low frequency squeezing is really important if we record quantum images with a CCD camera, which has a slow shutter speed. Also, it's been very difficult for people to get low-frequency squeezing. We obtain a record level of low-frequency squeezing using a simple dual-seeding technique. With this study of noise sources we are closer to having a portable quantum light source using diode lasers.

•Jan 1, 2020•0 citations
Electro-optic frequency combs (EO combs) enable high spectral and temporal resolution in atomic, molecular, and cavity-based spectroscopy that is at the heart of many quantum sensing applications. However, producing EO combs in the visible range remains challenging due to the limited availability of key components such as narrow-linewidth lasers and electro-optic phase modulators. Rubidium (Rb) is a highly nonlinear material that supports various four-wave mixing (4WM) processes, which are utilized for spectral translation and the generation of squeezed light. Here, we show the spectral translation of a 780 nm EO comb to 420 nm (a spectral separation of 330 THz) via a 4WM process in Rb vapor. We demonstrate the capability to extend the output comb bandwidth and signal-to-noise ratio by varying input power levels. Through this coherent process, we can generate frequency-agile combs in the blue, including a 1 kHz spaced comb with over one million individual comb teeth, of relevance for spectroscopic measurement of narrow-linewidth features such as electromagnetically induced transparency. Leveraging this approach across different 4WM interactions in Rb should allow for further wavelength conversion and the generation of correlated frequency combs, paving the way for sub-shot-noise (squeezed-light) measurements.
We demonstrate injection locking of Fabry–Perot lasers to electro-optic (EO) frequency combs using comb powers as low as 1 nW, more than two orders of magnitude below the levels required for semiconductor optical amplification. This approach extends EO comb spectral translation from the telecom band to 780 nm via second-harmonic generation in silicon nitride microring resonators. We further generate EO combs at 420 nm by translating 780 nm combs through a four-wave-mixing process in rubidium vapor. Integrating these techniques paves the way toward chip-scale cascaded frequency conversion from the telecom band into the blue, providing compact and scalable light sources for quantum technologies.
To transfer and expand in the optical telecommunication range the accurate 5S1/2(F = 3) – 5D5/2 (F = 5) rubidium frequency reference at 778 nm (385.285 THz), we employ a second harmonic generation (SHG) process coupled to an optical frequency comb (OFC) both based on the use of a low power and narrow linewidth laser diode operating around 1556 nm. The Rb optical frequency reference is known with an accuracy of 2.6 × 10−12 and exhibits a frequency stability of 4 × 10−13τ−1/2, with a Flicker plateau of 2 × 10−14 for τ > 200 s. With 20 mW of laser power at 1556 nm, we perform a SHG process in a periodically poled lithium niobate (PPLN) crystal and we obtain 6.5 μW of harmonic radiation at 778 nm, used to phase lock the IR laser against a Rb optical frequency standard (OFS). This Rb-referenced fundamental radiation at 1556 nm is duplicated as 34 lines spaced by 10 GHz using an electro-optic phase modulator (EOM). This preliminary result is mainly limited by unexpected high optical losses in the Fabry Perot cavity, which comprises the EOM.
The exceptional nonlinearity of alkali-metal vapors enables highly efficient nonlinear optical processes even at relatively low optical intensities. However, such processes have traditionally relied on centimeter-scale vapor cells. Here, we utilize a versatile chip-scale Rb vapor platform to generate coherent blue and mid-IR light in continuous-wave mode by means of resonant four-wave mixing. Optimized optical overlap with the atomic medium enables blue light generation of $\sim$20 μμμW over a very short interaction length, while maintaining a directly measured linewidth of $\sim$1 MHz, which is presently limited by the measurement apparatus. Comparison with a conventional glassblown vapor cell further shows that the micromachined platform can achieve higher coherent blue-light generation efficiency despite its substantially shorter interaction length. Moreover, an anodically bonded Si window enables to detect coherent mid-IR emission with collected powers of $\sim$50 nW. We further characterize the temperature dependence and input-power scaling of the blue emission, confirming efficient nonlinear conversion within these compact vapor cells. This chip-scale platform provides a versatile foundation for a range of nonlinear optical functions, from precise wavelength references and quantum light sources to next-generation quantum sensors.
We have generated a stable and continuously tunable single frequency (420 nm) coherent blue light (CBL) by the cavity-enhanced four-wave mixing process in Rb vapor. With the bow-tie-type ring cavity, the output power was 3.3 mW, two orders of magnitude higher than that of the CBL generated by the single-pass four-wave mixing process. The measured power stabilities of the 420 nm CBL operated at 2.5 mW and 1.5 mW for 1000 s were 2.89% and 1.88%, respectively. Under the scanning pump laser frequency, the continuously tunable range of the generated CBL reached 1.68 GHz without mode hopping. The measured beam qualities of the generated laser were M x 2 = 1.117 and M y 2 = 1.179 . The excellent performance of the 420 nm CBL was characterized by velocity transfer spectroscopy with 780 nm probe laser. This high quality short wavelength coherent light is potentially applicable to photon-atom interactions in quantum optics and fundamental research fields.
This work experimentally demonstrates the conversion of coherent and incoherent green 532 nm light to collimated blue 420 nm light through resonant four-wave mixing in rubidium vapor. The 532 nm light co-propagates with 795 nm and 1320 nm CW pump beams, simultaneously taking advantage of resonances between the 5 P, 10 S, 6 P and 5 S ground states of rubidium. Using a coherent green beam, the intensity of the collimated 420 nm signal is characterized under varying polarizations, cell temperatures, frequency detunings and pump intensities. A 2 d image is up-converted from green to blue light to extend the technique to spatially incoherent light. This excitation pathway has the potential to be used as a narrow linewidth ( < 1 GHz), tunable bandpass filter for lidar or other remote sensing applications. • Narrow linewidth of 532 nm signal up-converted to blue light using four wave mixing. • Demonstration of image up-conversion using hot Rb vapor. • A third applied IR pump beam increases conversion efficiency.
We study a variety of mechanisms that introduce noise into squeezed light generated by a four-wave mixing (4WM) process in Rb vapor. The noise from the seeding beam itself is a general noise that appears in any squeezed light generated from a seeding process. This noise dominates in the squeezed light at acoustic and lower measurement frequencies. A second excess noise source is observed in the twin beams pumped by either a diode laser system or a Ti:sapphire laser system. This excess noise is much stronger in the diode laser systems. It is present in the twin beams at measurement frequencies when the 4WM gain is reduced toward unity. Most of this excess noise can be removed with a dual-seeded 4WM scheme. A third noise source we examine is from a two-beam coupling that degrades the squeezing of the dual-seeded 4WM process at low frequencies of the order of the atomic transition linewidth. This noise can be avoided by seeding skew rays in the 4WM gain region. This gives us an insight to solve this "cross talk" problem by imaging the source in the 4WM gain region. In addition to studying noise sources, we propose a gain-independent calibration scheme that relies on higher order correlation function for the absolute calibration of photodiodes. Having low frequency squeezing is really important if we record quantum images with a CCD camera, which has a slow shutter speed. Also, it's been very difficult for people to get low-frequency squeezing. We obtain a record level of low-frequency squeezing using a simple dual-seeding technique. With this study of noise sources we are closer to having a portable quantum light source using diode lasers.