Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Towards trapping of hydrogen atoms for computable optical clock applications

Omer Amit, Derya Taray, Vitaly Wirthl, Vincent Weis, Mustafa Waqar Syed, Akira Ozawa, Johannes Weitenberg, Savely G. Karshenboim, Jook T. M. Walraven, Lothar Maisenbacher, Randolf Pohl, Z. Burkley, Fabian Schmid, Theodor W. Hänsch, D. C. Yost, Thomas Udem

Published Aug 5, 2025• 6 citations
Publisher

Abstract

Because of its simple structure, the hydrogen atom is often used as a testbed for quantum electrodynamics. Spectroscopy of trapped atomic samples can greatly improve the accuracy of these tests. Trapping atomic hydrogen in an optical dipole trap or an optical lattice has never been achieved. Only trapping in magnetic fields that lead to large Zeeman shifts has been demonstrated. Standard techniques of atomic physics are difficult to apply to atomic hydrogen. The small mass of the atom and the large photon energy of the 1-2 cooling transition significantly complicate Doppler cooling. This proposal introduces a photon recoil-assisted loading scheme that uses these properties to our advantage to load atomic hydrogen into an optical dipole trap without laser cooling. The magic wavelength (515 nm) for the 1-2 clock transition (1.3-Hz natural linewidth) is easily accessible with current laser technology. Since the 1-2 clock transition can be driven Doppler free, we do not require a very low temperature. Besides improving spectroscopy for fundamental science, such a system can also be used as a “computable” atomic clock that may one day justify the redefinition of the SI second in terms of the Rydberg constant.

DOI
10.1103/3bnr-q23f

Related papers

Trapped atomic hydrogen

Jon C. Sandberg, John M. Doyle, Ite A. Yu +3 more

Atomic hydrogen has been loaded into a 1-K deep magnetic trap through the use of a dilution refrigerator. Evaporative cooling has been used to cool the trapped hydrogen into the submillikelvin temperature regime. These techniques have produced a sample with density of 8 × 1013 cm-3 at a temperature of 100 μK. At this density a transition to a Bose-Einstein condensate is predicted to occur at a temperature of 30 μK. These results have been obtained with a magnetic trap that has been constructed to accommodate upcoming experiments based on laser spectroscopy of the 1S-2S two photon transition in the trapped hydrogen. A frequency doubled narrow linewidth cw dye laser system has been constructed to excite the 1S-2S transition. The excitation will be detected by the observation of electric field-induced Lyman-alpha fluorescence. The optical detection system should yield improved sample density and temperature diagnostic capabilities that will facilitate a closer approach to the quantum degenerate regime. Additionally the cold, confined hydrogen gas offers the possibility of improving the level of resolution of Doppler-free hydrogen 1S-2S laser spectroscopy by several orders of magnitude.

Annual Meeting Optical Society of America•Jan 1, 1991•0 citations

Setup of a Transportable Yb Optical Lattice Clock

C. Abou-Jaoudeh

In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.

•Jan 1, 2016•0 citations

Experimental research on loading strontium bosons into the optical lattice operating at the “magic” wavelength

Tian Xiao, Wang Ye-Bing, Lu Ben-Quan +7 more

The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.

Acta Physica Sinica•Jan 1, 2015•0 citations

Trapping and Laser Cooling an Ensemble of Ytterbium-171 Atoms for use in an Atomic Clock

Velez, Gustavo A.

Optical lattice clocks require careful preparation of atomic ensembles in order to ensure homogeneous interactions with the clock laser. We demonstrate loading and laser cooling of an ensemble of ytterbium-171 atoms in a 2D optical dipole trap created by an optical cavity. Our loading method ensures that all atoms are located in the intersection of 2 perpendicular dipole traps as verified through absorption imaging. Raman sideband cooling was used to cool the atomic ensemble from 15.7 uK to 6.3 uK as measured through optical sideband spectroscopy on the 578 nm clock transition. Together, these steps improved the transfer of atoms during a Rabi oscillation from the ground to the clock state from approximately 45 percent excitation fraction to 80 percent excitation fraction. The final atomic ensemble preparation is now sufficient for running an atomic clock.

•May 1, 2025•0 citations

Two-stage laser cooling and optical trapping of thulium atoms

Gulnara A. Vishnyakova, Елена Сергеевна Калганова, Денис Дмитриевич Сукачев +5 more

We propose to use the magnetic-dipole transition at coupling two ground state fine-structure components of thulium (Tm), as a 'clock transition' in optical clocks. We have demonstrated first stage laser cooling of Tm atoms down to a temperature of 25 K using a strong transition at and we have also shown preliminary results for second stage cooling using a weaker transition at (natural linewidth γ G = 350 kHz). Laser cooled atoms have been trapped in an optical dipole trap and in a 1D optical lattice operating near 532 nm.

Laser Physics•Jun 13, 2014•19 citations

High Precision Spectroscopy of Strontium in an Optical Lattice: Towards a New Standard for Frequency and Time

Martin M. Boyd

Clocks based on optical transitions in ions and atoms are quickly moving to the forefront of the frequency standards field mainly because of the high spec-tral resolution, and therefore the potential stability and accuracy, which can be achieved. In this thesis a new optical clock based on neutral atoms trapped in an optical lattice is presented, demonstrating spectroscopy of the clock transition free of any lineshape or accuracy degradation due to atomic motion. The system simu-lates a single trapped ion clock, but allows use of thousands of atoms for improved signal to noise ratio, and clock stability. High accuracy can also be achieved as the lattice can be designed to shift the energy of the two atomic clock states equally, such that the transition frequency is unchanged. Strontium is a natural candidate for such a clock as it offers an extremely narrow optical transition (∼1 mHz) based on atomic states which are very insensitive to external fields. The strontium level structure allows efficient laser cooling to 1 µK with diode laser sources, and a con-venient wavelength of 813 nm for the zero-differential Stark shift optical lattice. The strontium lattice clock system has allowed observation of high signal-to-noise

•Jan 1, 2007•39 citations
Because of its simple structure, the hydrogen atom is often used as a testbed for quantum electrodynamics. Spectroscopy of trapped atomic samples can greatly improve the accuracy of these tests. Trapping atomic hydrogen in an optical dipole trap or an optical lattice has never been achieved. Only trapping in magnetic fields that lead to large Zeeman shifts has been demonstrated. Standard techniques of atomic physics are difficult to apply to atomic hydrogen. The small mass of the atom and the large photon energy of the 1-2 cooling transition significantly complicate Doppler cooling. This proposal introduces a photon recoil-assisted loading scheme that uses these properties to our advantage to load atomic hydrogen into an optical dipole trap without laser cooling. The magic wavelength (515 nm) for the 1-2 clock transition (1.3-Hz natural linewidth) is easily accessible with current laser technology. Since the 1-2 clock transition can be driven Doppler free, we do not require a very low temperature. Besides improving spectroscopy for fundamental science, such a system can also be used as a “computable” atomic clock that may one day justify the redefinition of the SI second in terms of the Rydberg constant.
Atomic hydrogen has been loaded into a 1-K deep magnetic trap through the use of a dilution refrigerator. Evaporative cooling has been used to cool the trapped hydrogen into the submillikelvin temperature regime. These techniques have produced a sample with density of 8 × 1013 cm-3 at a temperature of 100 μK. At this density a transition to a Bose-Einstein condensate is predicted to occur at a temperature of 30 μK. These results have been obtained with a magnetic trap that has been constructed to accommodate upcoming experiments based on laser spectroscopy of the 1S-2S two photon transition in the trapped hydrogen. A frequency doubled narrow linewidth cw dye laser system has been constructed to excite the 1S-2S transition. The excitation will be detected by the observation of electric field-induced Lyman-alpha fluorescence. The optical detection system should yield improved sample density and temperature diagnostic capabilities that will facilitate a closer approach to the quantum degenerate regime. Additionally the cold, confined hydrogen gas offers the possibility of improving the level of resolution of Doppler-free hydrogen 1S-2S laser spectroscopy by several orders of magnitude.
In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.
The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.
Optical lattice clocks require careful preparation of atomic ensembles in order to ensure homogeneous interactions with the clock laser. We demonstrate loading and laser cooling of an ensemble of ytterbium-171 atoms in a 2D optical dipole trap created by an optical cavity. Our loading method ensures that all atoms are located in the intersection of 2 perpendicular dipole traps as verified through absorption imaging. Raman sideband cooling was used to cool the atomic ensemble from 15.7 uK to 6.3 uK as measured through optical sideband spectroscopy on the 578 nm clock transition. Together, these steps improved the transfer of atoms during a Rabi oscillation from the ground to the clock state from approximately 45 percent excitation fraction to 80 percent excitation fraction. The final atomic ensemble preparation is now sufficient for running an atomic clock.
We propose to use the magnetic-dipole transition at coupling two ground state fine-structure components of thulium (Tm), as a 'clock transition' in optical clocks. We have demonstrated first stage laser cooling of Tm atoms down to a temperature of 25 K using a strong transition at and we have also shown preliminary results for second stage cooling using a weaker transition at (natural linewidth γ G = 350 kHz). Laser cooled atoms have been trapped in an optical dipole trap and in a 1D optical lattice operating near 532 nm.
Clocks based on optical transitions in ions and atoms are quickly moving to the forefront of the frequency standards field mainly because of the high spec-tral resolution, and therefore the potential stability and accuracy, which can be achieved. In this thesis a new optical clock based on neutral atoms trapped in an optical lattice is presented, demonstrating spectroscopy of the clock transition free of any lineshape or accuracy degradation due to atomic motion. The system simu-lates a single trapped ion clock, but allows use of thousands of atoms for improved signal to noise ratio, and clock stability. High accuracy can also be achieved as the lattice can be designed to shift the energy of the two atomic clock states equally, such that the transition frequency is unchanged. Strontium is a natural candidate for such a clock as it offers an extremely narrow optical transition (∼1 mHz) based on atomic states which are very insensitive to external fields. The strontium level structure allows efficient laser cooling to 1 µK with diode laser sources, and a con-venient wavelength of 813 nm for the zero-differential Stark shift optical lattice. The strontium lattice clock system has allowed observation of high signal-to-noise