Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Universal Encoder for Phase-, Time-Bin- and Polarization-Based QKD Schemes

Silas Eul, Thomas Hiemstra, Joost Vermeer, Julian Struck, Christoph Marquardt

Published Jun 23, 2025• 0 citations
Publisher

Abstract

Here we present a QKD transmitter architecture, which enables the preparation of a fast and stable modulation of coherent light for polarisation, phase or time-bin encoded quantum states with the same setup. In contrast to other setups which are capable of preparing multiple modulation schemes [1], [2], the same optical layout and driving electronics can be used, without the need to change the optical layout or adding several additional components. Furthermore, the whole system is designed to compensate for phase drifts which would otherwise affect encoding stability and can be implemented on photonic integrated circuits (PICs).

DOI
10.1109/cleo/europe-eqec65582.2025.11110196

Related papers

A polarization encoder for satellite-to-ground QKD

Thomas Roger, Chithrabhanu Perumangatt, Ravinder Singh +4 more

We report the development of an optical assembly and driving electronics for a low-SWaP polarization encoder design for use in satellite-to-ground quantum communication. The optical design multiplexes multiple lasers, which are selectively excited to produce a polarization encoded output. This implementation is intrinsically stable due to the use of only polarization maintaining fiber in the combining optics. The transmitter, provides a low-cost, low-power and high-speed platform to produce polarization encoded pulses. We use the transmitter to generate 4 polarization states with 2 intensity levels via multiplexing of 8 pulsed light sources. The module can generate the polarization states H, V, D and A, which correspond to polarization angles of 0, 90, 45 and -45 degrees respectively, forming two mutually unbiased bases. The transmitter is characterized via a polarization decoder over a free-space link within a laboratory setting. We characterize the source for varying optical channel loss which is introduced between the transmitter and receiver. The transmitter employs the T12 decoy-state BB84 protocol. We explore the performance of the system with commercially available single photon detectors for two clock rates of 500 MHz and 1 GHz. We find a similar secure key rate for both repetition rates, despite the expected 3 dB gain at 1 GHz. This is a result of detector jitter hindering the performance of the QKD system, resulting in a larger QBER when detection events leak into the adjacent time bins and ultimately reduces the secure key rate.

Quantum Computing, Communication, and Simulation•Mar 8, 2023•0 citations

Time-bin phase-encoding quantum key distribution using Sagnac-based optics and compatible electronics

yan-lin tang, Chun Zhou, Dongdong Li +18 more

In this work, we present a new time-bin phase-encoding quantum key distribution (QKD), where the transmitter utilizes an inherently stable Sagnac-type interferometer, and has comparable electrical requirements to existing polarization or phase encoding schemes. This approach does not require intensity calibration and is insensitive to environmental disturbances, making it both flexible and high-performing. We conducted experiments with a compact QKD system to demonstrate the stability and secure key rate performance of the presented scheme. The results show a typical secure key rate of 6.2 kbps@20 dB and 0.4 kbps@30 dB with channel loss emulated by variable optical attenuators. A continuous test of 120-km fiber spool shows a stable quantum bit error rate of the time-bin basis within 0.4%∼0.6% over a consecutive 9-day period without any adjustment. This intrinsically stable and compatible scheme of time-bin phase encoding is extensively applicable in various QKD experiments, including BB84 and measurement-device-independent QKD.

Optics Express•Jul 5, 2023•25 citations

Low-error encoder for time-bin and decoy states for quantum key distribution

Davide Scalcon, Elisa Bazzani, Giuseppe Vallone +2 more

Time-bin encoding is a robust method for implementing quantum key distribution (QKD) on optical fiber channels, minimizing drift-induced errors. However, interferometric structures make achieving stable and low intrinsic Quantum Bit Error Rate (QBER) challenging. A key device for decoy-state QKD is the state encoder, which must produce low-error, stable states with varying photon mean values. Here, we introduce the MacZac ( Mac h- Z ehnder-S a gna c ), a time-bin encoder with ultra-low QBER (<2 × 10 −5 ) and high stability. Based on nested Sagnac and Mach-Zehnder interferometers, it uses a single phase modulator for both decoy and state preparation, simplifying the optical setup. The encoder requires no active compensation and can generate states of arbitrary dimension. We experimentally tested it as a standalone component and in a QKD experiment. With its low QBER, stability, and simplicity, this device is a key building block for high-performance, low-cost QKD systems.

arXiv:2311.02059•npj Quantum Information•Feb 6, 2025•9 citations

Robust polarization state generation for long-range quantum key distribution

Abigail Stein, Ignacio H. López Grande, Lorenzo Castelvero +1 more

We present a new compact and robust polarization state transmitter designed to execute the BB84 quantum key distribution protocol. Our transmitter prepares polarization states using a single commercial-off-the-shelf phase modulator. Our scheme does not require global biasing to compensate thermal and mechanical drifts, as both of the system's two time-demultiplexed polarization modes share a single optical path. Furthermore, the transmitter's optical path entails a double-pass through the phase modulation device for each polarization mode, allowing multiple phase rotations to be impinged on each light pulse. We present a proof-of-concept prototype of this transmitter topology and demonstrate a mean intrinsic quantum bit error rate below 0.2% over a 5 hour measurement.

Optics Express•Mar 20, 2023•11 citations

Design of an Integrated Sagnac Interferometer Transmitter for QKD Systems

Parisa Khajegi, Nabarun Saha, Giuseppe Brunetti +4 more

We propose a design for a thin-film lithium niobate (TFLN) integrated transmitter architecture for polarizationencoded quantum key distribution (QKD) based on a Sagnac interferometer configuration. Unlike conventional integrated QKD transmitters relying on Mach-Zehnder interferometers (MZI), the proposed scheme exploits the intrinsic self-compensating property of the Sagnac loop to mitigate phase fluctuations caused by thermal and mechanical perturbations. The architecture incorporates an on-chip polarization splitter-rotator that converts the input polarization into two counter-propagating TE0 modes circulating in opposite directions within the loop. A single electro-optic phase modulator applies controlled phase shifts to temporally separated pulses, enabling the generation of the four polarization states required for polarization-encoded QKD protocols. System-level simulations confirm the feasibility of the polarization encoding mechanism and demonstrate the generation of diagonal, anti-diagonal, and circular polarization states on the Poincaré sphere. Compared with previously reported discrete Sagnac implementations and integrated Mach-Zehnder-based transmitters, the proposed design is expected to offer improved phase stability, reduced sensitivity to environmental perturbations, and a compact integrated architecture. These features suggest that a device based on this architecture could be a promising candidate for scalable and robust quantum photonic transmitters in future fiber and free-space QKD systems.

International Conference on Transparent Optical Networks•Jul 1, 2026•0 citations

Optical transmitter for time-bin encoding quantum key distribution

Julián Morales, M. Guadalupe Aparicio, Carlos F. Longo +2 more

We introduce an electro-optical arrangement that can produce time-bin encoded symbols with the decoy state method over a standard optical fiber in the C-band telecom window. The device consists of a specifically designed pulse pattern generator for pulse production and a field-programmable gate array that controls timing and synchronization. The electrical pulse output drives a sequence of intensity modulators acting on a continuous laser that deliver bursts of weak optical pulse pairs of discrete intensity values. Such a transmitter allows for the generation of all the quantum states needed to implement a discrete variable quantum key distribution (QKD) protocol over a single-mode fiber channel. Symbols are structured in bursts; the minimum relative delay between pulses is 1.25 ns, and the maximum symbol rate within a burst is 200 MHz. We tested the transmitter on simulated optical channels of 7 dB and 14 dB loss, obtaining maximum extractable secure key rates of 3.0 kb/s and 0.57 kb/s, respectively. Time-bin-state parameters such as the symbol rate, pulse separation, and intensity ratio between the signal and decoy states can be easily accessed and changed, allowing the transmitter to adapt to different experimental conditions and contributing to the standardization of QKD implementations.

arXiv:2303.15549•Journal of the Optical Society of America B•Jan 18, 2023•4 citations
Here we present a QKD transmitter architecture, which enables the preparation of a fast and stable modulation of coherent light for polarisation, phase or time-bin encoded quantum states with the same setup. In contrast to other setups which are capable of preparing multiple modulation schemes [1], [2], the same optical layout and driving electronics can be used, without the need to change the optical layout or adding several additional components. Furthermore, the whole system is designed to compensate for phase drifts which would otherwise affect encoding stability and can be implemented on photonic integrated circuits (PICs).
We report the development of an optical assembly and driving electronics for a low-SWaP polarization encoder design for use in satellite-to-ground quantum communication. The optical design multiplexes multiple lasers, which are selectively excited to produce a polarization encoded output. This implementation is intrinsically stable due to the use of only polarization maintaining fiber in the combining optics. The transmitter, provides a low-cost, low-power and high-speed platform to produce polarization encoded pulses. We use the transmitter to generate 4 polarization states with 2 intensity levels via multiplexing of 8 pulsed light sources. The module can generate the polarization states H, V, D and A, which correspond to polarization angles of 0, 90, 45 and -45 degrees respectively, forming two mutually unbiased bases. The transmitter is characterized via a polarization decoder over a free-space link within a laboratory setting. We characterize the source for varying optical channel loss which is introduced between the transmitter and receiver. The transmitter employs the T12 decoy-state BB84 protocol. We explore the performance of the system with commercially available single photon detectors for two clock rates of 500 MHz and 1 GHz. We find a similar secure key rate for both repetition rates, despite the expected 3 dB gain at 1 GHz. This is a result of detector jitter hindering the performance of the QKD system, resulting in a larger QBER when detection events leak into the adjacent time bins and ultimately reduces the secure key rate.
In this work, we present a new time-bin phase-encoding quantum key distribution (QKD), where the transmitter utilizes an inherently stable Sagnac-type interferometer, and has comparable electrical requirements to existing polarization or phase encoding schemes. This approach does not require intensity calibration and is insensitive to environmental disturbances, making it both flexible and high-performing. We conducted experiments with a compact QKD system to demonstrate the stability and secure key rate performance of the presented scheme. The results show a typical secure key rate of 6.2 kbps@20 dB and 0.4 kbps@30 dB with channel loss emulated by variable optical attenuators. A continuous test of 120-km fiber spool shows a stable quantum bit error rate of the time-bin basis within 0.4%∼0.6% over a consecutive 9-day period without any adjustment. This intrinsically stable and compatible scheme of time-bin phase encoding is extensively applicable in various QKD experiments, including BB84 and measurement-device-independent QKD.
Time-bin encoding is a robust method for implementing quantum key distribution (QKD) on optical fiber channels, minimizing drift-induced errors. However, interferometric structures make achieving stable and low intrinsic Quantum Bit Error Rate (QBER) challenging. A key device for decoy-state QKD is the state encoder, which must produce low-error, stable states with varying photon mean values. Here, we introduce the MacZac ( Mac h- Z ehnder-S a gna c ), a time-bin encoder with ultra-low QBER (<2 × 10 −5 ) and high stability. Based on nested Sagnac and Mach-Zehnder interferometers, it uses a single phase modulator for both decoy and state preparation, simplifying the optical setup. The encoder requires no active compensation and can generate states of arbitrary dimension. We experimentally tested it as a standalone component and in a QKD experiment. With its low QBER, stability, and simplicity, this device is a key building block for high-performance, low-cost QKD systems.
We present a new compact and robust polarization state transmitter designed to execute the BB84 quantum key distribution protocol. Our transmitter prepares polarization states using a single commercial-off-the-shelf phase modulator. Our scheme does not require global biasing to compensate thermal and mechanical drifts, as both of the system's two time-demultiplexed polarization modes share a single optical path. Furthermore, the transmitter's optical path entails a double-pass through the phase modulation device for each polarization mode, allowing multiple phase rotations to be impinged on each light pulse. We present a proof-of-concept prototype of this transmitter topology and demonstrate a mean intrinsic quantum bit error rate below 0.2% over a 5 hour measurement.
We propose a design for a thin-film lithium niobate (TFLN) integrated transmitter architecture for polarizationencoded quantum key distribution (QKD) based on a Sagnac interferometer configuration. Unlike conventional integrated QKD transmitters relying on Mach-Zehnder interferometers (MZI), the proposed scheme exploits the intrinsic self-compensating property of the Sagnac loop to mitigate phase fluctuations caused by thermal and mechanical perturbations. The architecture incorporates an on-chip polarization splitter-rotator that converts the input polarization into two counter-propagating TE0 modes circulating in opposite directions within the loop. A single electro-optic phase modulator applies controlled phase shifts to temporally separated pulses, enabling the generation of the four polarization states required for polarization-encoded QKD protocols. System-level simulations confirm the feasibility of the polarization encoding mechanism and demonstrate the generation of diagonal, anti-diagonal, and circular polarization states on the Poincaré sphere. Compared with previously reported discrete Sagnac implementations and integrated Mach-Zehnder-based transmitters, the proposed design is expected to offer improved phase stability, reduced sensitivity to environmental perturbations, and a compact integrated architecture. These features suggest that a device based on this architecture could be a promising candidate for scalable and robust quantum photonic transmitters in future fiber and free-space QKD systems.
We introduce an electro-optical arrangement that can produce time-bin encoded symbols with the decoy state method over a standard optical fiber in the C-band telecom window. The device consists of a specifically designed pulse pattern generator for pulse production and a field-programmable gate array that controls timing and synchronization. The electrical pulse output drives a sequence of intensity modulators acting on a continuous laser that deliver bursts of weak optical pulse pairs of discrete intensity values. Such a transmitter allows for the generation of all the quantum states needed to implement a discrete variable quantum key distribution (QKD) protocol over a single-mode fiber channel. Symbols are structured in bursts; the minimum relative delay between pulses is 1.25 ns, and the maximum symbol rate within a burst is 200 MHz. We tested the transmitter on simulated optical channels of 7 dB and 14 dB loss, obtaining maximum extractable secure key rates of 3.0 kb/s and 0.57 kb/s, respectively. Time-bin-state parameters such as the symbol rate, pulse separation, and intensity ratio between the signal and decoy states can be easily accessed and changed, allowing the transmitter to adapt to different experimental conditions and contributing to the standardization of QKD implementations.