In this study, we have compared different Rydberg atom-based microwave electrometry techniques under the same experimental conditions and using the same Rydberg states (68S1/2, 68P3/2, and 67P3/2). The comparison was carried out for the following techniques: (i) auxiliary microwave field, (ii) microwave amplitude modulation, and (iii) polarization spectroscopy. Our results indicate that all three techniques have a similar minimum measurable microwave electric field. A slightly better result can be obtained by performing polarization spectroscopy using a Laguerre–Gauss coupling laser beam.
Rydberg atoms have demonstrated exceptional capabilities in the precise sensing microwave (MW) fields. Previous studies on Rydberg atom-based electrometers (RAEs) have predominantly focused on absorption measurements. Recently, phase-sensitive RAEs employing Mach-Zehnder interferometer (MZI) have been demonstrated, though their performance remains constrained by the standard quantum limit (SQL). In this study, we combine RAEs with advanced quantum interferometrics to enhance MW field sensing. Within the framework of electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting, the noise of our enhanced electrometer is suppressed below the photon shot noise (PSN) in measuring light dispersion through microwave-dressed atoms, when utilizing phase squeezed states. In our theory, the optimal sensitivity of the MW field can reach 1.36 × 10 −11 V/m/Hz 1/2 with a dressed MW field strength of 2.4 × 10 −4 V/m within a balanced SU(1,1) interferometer.
An atom-based approach is presented to detect absolute microwave (MW) electric fields (E-fields). The approach uses Rydberg atoms in vapor cells at room temperature. The MW E-field measurements utilize a bright resonance prepared within an electromagnetically induced transparency (EIT) window. The large transition dipole moments between energetically adjacent Rydberg states enable this method to make traceable E-field measurements with a sensitivity that is several orders of magnitude higher than the current standard for MW E-field measurements. The method can be used to image MW E-field in the near field regime with a subwavelength resolution of
mathrmlambdaMW/650, where
mathrmlambdaMW is the wavelength of the MW E-field. A high accuracy of $\\mathrm{1\\%}$ has been reached by minimizing the effects of the vapor cell geometry on the measured MW E-field. The dissertation also presents an alternative technique to perform the MW E-field measurement using dispersive properties of the EIT spectrum with a prism vapor cell. Recently, we applied a homodyne detection technique with a Mach Zehnder interferometer to achieve a new sensitivity limit for the MW E-field measurement,
mathrmsim3 muVcm−1Hz−1/2. The new sensitivity is one order of magnitude better than our prior best sensitivity presented in Ref. [Nat. Phys. 8, 819 (2012)]. The Rydberg atom-based method is promising to be a new standard for MW E-field measurements and to develop into portable devices in the field of MW technologies.