Superconducting traveling-wave parametric amplifiers are a key technology for high-fidelity qubit readout.Due to their quantum-limited noise performance and the ultra-lowpower signals in quantum circuits, field quantization needs to be taken into account for accurate modeling of these devices.We present a symbolic-numeric modeling approach for the analysis of Josephson traveling-wave parametric amplifiers, including resonant phase matchers.We demonstrate the capabilities of our approach by comparing the results to existing analytical models from the literature and present first results beyond the stiff pump approximation.
Superconducting traveling-wave parametric amplifiers are a key technology for high-fidelity qubit readout.Due to their quantum-limited noise performance and the ultra-lowpower signals in quantum circuits, field quantization needs to be taken into account for accurate modeling of these devices.We present a symbolic-numeric modeling approach for the analysis of Josephson traveling-wave parametric amplifiers, including resonant phase matchers.We demonstrate the capabilities of our approach by comparing the results to existing analytical models from the literature and present first results beyond the stiff pump approximation.
Superconducting parametric amplifiers have great promise for quantum-limited readout of superconducting qubits and detectors. Until recently, most superconducting parametric amplifiers had been based on resonant structures, limiting their bandwidth and dynamic range. Broadband traveling-wave parametric amplifiers based both on the nonlinear kinetic inductance of superconducting thin films and on Josephson junctions are in development. By modifying the dispersion property of the amplifier circuit, referred to as dispersion engineering, the gain can be greatly enhanced and the size can be reduced. We present two theoretical frameworks for analyzing and understanding such parametric amplifiers: 1) generalized coupled-mode equations and 2) a finite difference time domain (FDTD) model combined with a small signal analysis. We show how these analytical and numerical tools may be used to understand device performance.
Analytic solutions fail to accurately predict the gain and added quantum noise in traveling-wave parametric amplifiers for large signal amplitudes. Thus, the underlying system Hamiltonian needs to be extended to include more and more modes in order to describe effects such as spectral leakage. For a sufficiently complex Hamiltonian, the procedure of deriving the Heisenberg equations of motion for each mode is tedious or even prohibitive. Therefore, we present a symbolic-numeric co-simulation approach, where the equations of motion are automatically derived from a given Hamiltonian using a modern computer algebra system. The resulting equations of motion can be solved numerically. We verified our approach using existing analytic and numeric solutions from the literature and found good agreement. Additionally, we simulate an amplifier from the literature, where the pump mode experiences substrate losses beyond the stiff pump approximation.
Superconducting Josephson traveling wave parametric amplifiers (JTWPAs) enable broadband, quantum-limited amplification of weak microwave signals. JTWPAs are essential for the single-shot readout of superconducting qubits, broadband vacuum squeezing, or the generation of microwave cluster states. Phase-matching between signal and pump modes in such JTWPAs represents a major engineering challenge, which is typically solved by integrating resonators in a nonlinear medium in order to tailor electromagnetic dispersion relations and achieve a broadband, high-gain amplification. Here, we experimentally demonstrate a phase-matching approach using a homogeneous nonlinear medium based on Josephson elements by exploiting a magnetic field inhomogeneity. We show how the latter may lead to the sign reversal of the 3-wave mixing nonlinearity and stabilization of the parametric amplification. We envision this technique as a viable alternative to conventional phase-matching approaches.
The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.
Josephson traveling-wave parametric amplifiers (JTWPAs) are wideband, ultralow-noise amplifiers used to enable the readout of superconducting qubits. While individual JTWPAs have achieved high performance, behavior between devices is inconsistent due to wide manufacturing tolerances. Amplifier designs could be modified to improve resilience towards variations in amplifier components; however, existing device models often rely on analytical techniques that typically fail to incorporate component variations. To begin addressing this issue, a 1D numerical method for modeling JTWPAs is introduced in this work. The method treats the Josephson junctions and transmission lines in an amplifier as coupled subsystems and can easily incorporate arbitrary parameter variations. We discretize the transmission line subsystem with a finite element time domain method and the Josephson junction subsystem with a finite difference method, with leap-frog time marching used to evolve the system in time. We validate our method by comparing the computed gain to an analytical model for a traditional JTWPA architecture and one with resonant phase matching. We then use our method to demonstrate the impact of variations in Josephson junctions and phase-matching resonators on amplification. In future work, the method will be adjusted to incorporate additional amplifier architectures and extended to a 3D full-wave approach.
The development of large-scale superconducting quantum computers critically depends on the accurate readout of qubit states. To enable this, cryogenic parametric amplifiers have been proposed and developed, and have since found widespread use in small-signal detection applications. Among various amplifier architectures, Josephson traveling-wave parametric amplifiers (JTWPAs) are widely adopted due to their broad bandwidth, high saturation power, and compatibility with superconducting qubits. In this work, we present a design workflow of JTWPAs based on a co-simulation approach combining electromagnetic (EM) and circuit-level simulation. We apply this method to a uniform JTWPA, comparing our simulation results with experimental data. To mitigate the challenge of constructing lumped element circuit models usually used in conventional simulation method, we directly perform full EM analysis of the device to accurately determine its linear response. The extracted S parameters are then fed into a nonlinear harmonic balance simulator with Josephson junctions modeled as circuit elements. By doing so, the linear and gain properties of the JTWPA are extracted. Different factors that impact device performance including gain compression, phase matching, and fabrication imperfections are further investigated and modeled. A good agreement between simulation and measurements is identified, establishing the effectiveness of our approach in designing quantum parametric amplifiers.