Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Microwave and Wireless Technology Letters

11.3–13.6-GHz Cryo-CMOS 4P4T RF Switch for Superconducting Quantum Computer at mK Temperature

Kangseop Lee, Hyeoncheol Park, Ho-Jin Song

Published Jul 18, 2025• 1 citation
Publisher

Abstract

To address the scalability challenges of traditional series-shunt RF switches, this article presents a scalable multipole N-throw (MPNT) RF switch designed for qubit quantum computers operating at cryogenic temperatures below 1 K. To demonstrate the scalability of the proposed switch in terms of the number of ports, a 4P4T switch with a series-resonance configuration was implemented. The 4P4T switch was fabricated using 65-nm bulk CMOS technology and measured at 300, 77, and 0.6 K using an on-PCB thru-reflect-line (TRL) de-embedding technique. The maximum insertion loss was measured to be 2.5 dB at 600 mK in a dilution refrigerator. The maximum isolation at 600 mK was measured as 25 dB.

DOI
10.1109/lmwt.2025.3584337

Related papers

Scalable 1.4 μW cryo-CMOS SP4T multiplexer operating at 10 mK for high-fidelity superconducting qubit measurements

Rohith Acharya, Anton Potočnik, S. Brebels +14 more

In this work, we report on the electrical performance of an ultra-low-power cryo-CMOS single-pole-4-throw (SP4T) RF multiplexer working at 10 mK base temperature stage of a dilution refrigerator. We use the multiplexer to benchmark a superconducting qubit for the very first time and obtain qubit coherence times of over 35 μs along with an average single-qubit gate fidelity of 99.93%, which exceeds the threshold required for quantum error-correction based on surface-code. This work demonstrates the operability of superconducting qubits with ultra-low-power cryo-CMOS devices at the base temperature, paving the way for advanced co-integration schemes.

IEEE Symposium on VLSI Technology and Circuits (VLSI Technology and Circuits)•Jun 12, 2022•1 citation

A Passive Front-End Receiver for RF Reflectometry Readout in Spin Qubits

Bagas Prabowo, Oriol Pietx-Casas, Mohammad Ali Montazerolghaem +5 more

A scalable spin-qubit quantum processor requires fast, high-fidelity readout circuits operating at cryogenic temperatures (CTs). This work analyzes the radio frequency (RF) reflectometry readout mechanism to establish the link between conductance modulation, single-electron transistor (SET) matching network design, reflected signal power, and receiver (RX) noise temperature. Based on this analysis, a cryogenic RX architecture employing a passive switched-capacitor front-end is proposed. The front-end performs RF amplification and downconversion using transistors as switches, avoiding active RF amplification and mitigating shot-noise limitations. The RX is implemented in 40-nm CMOS and operates from 100 MHz to 2.2 GHz. Measurements demonstrate a minimum noise temperature of approximately 15 K at 4.2 K. When integrated with a quantum device, the RX achieves a signal-to-noise ratio (SNR) of 9.8 dB for a 10-µs integration time and enables 99.9% charge-state readout fidelity without external cryogenic amplifiers. This work represents the first demonstration of such fidelity using a cryo-CMOS RX and constitutes an important step toward scalable integration of qubit readout electronics.

IEEE Journal of Solid-State Circuits•Jan 1, 2026•0 citations

Millikelvin temperature cryo-CMOS multiplexer for scalable quantum device characterisation

Anton Potočnik, S. Brebels, Jeroen Verjauw +11 more

Abstract Quantum computers based on solid state qubits have been a subject of rapid development in recent years. In current noisy intermediate-scale quantum technology, each quantum device is controlled and characterised through a dedicated signal line between room temperature and base temperature of a dilution refrigerator. This approach is not scalable and is currently limiting the development of large-scale quantum system integration and quantum device characterisation. Here we demonstrate a custom designed cryo-CMOS multiplexer operating at 32 mK. The multiplexer exhibits excellent microwave properties up to 10 GHz at room and millikelvin temperatures. We have increased the characterisation throughput with the multiplexer by measuring four high-quality factor superconducting resonators using a single input and output line in a dilution refrigerator. Our work lays the foundation for large-scale microwave quantum device characterisation and has the perspective to address the wiring problem of future large-scale quantum computers.

arXiv:2011.11514•Quantum Science and Technology•Sep 23, 2021•27 citations

34.2 A 28-nm Bulk-CMOS IC for Full Control of a Superconducting Quantum Processor Unit-Cell

Juhwan Yoo, Zijun Chen, Frank Arute +10 more

While large-scale fault-tolerant quantum computers promise to enable the solution to certain classes of problems for which no other efficient approach is known, such a machine is believed to require over a million performant qubits. Scaling today's 0(100) qubit superconducting (SC) quantum computers to this extent while also improving performance carries many daunting challenges, including control of such a large quantum processor (QP). Integrating the control electronics at an intermediate temperature stage within the cryostat is an attractive option, e.g., due to the inherent thermal stability of the cryogenic environment and the feasibility of connecting to the QP via dense low-loss/high-thermal-isolation SC lines [1], [2]. Several cryo-CMOS quantum controllers have been reported, with examples used to control spin [3] and transmon [1], [2] qubits. To date, IC-based quantum control experiments have focused on resonant RF control, but baseband signals are often central to the execution of gates. Here, we report the design and system characterization of a cryo-CMOS IC for generating both the RF and baseband signals required for full control of a SC QP unit-cell, and show its ability to implement the components of a high-fidelity gate set that is universal for quantum computing.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Feb 19, 2023•43 citations

Benefits and Challenges of Designing Cryogenic CMOS RF Circuits for Quantum Computers

Mohammadreza Mehrpoo, Bishnu Patra, Jiang Gong +7 more

Accurate and low-noise generation and amplification of microwave signals are required for the manipulation and readout of quantum bits (qubits). A fault-tolerant quantum computer operates at deep cryogenic temperatures (i.e., <; 100mK) and requires thousands of qubits for running practical quantum algorithms. Consequently, CMOS radio-frequency (RF) integrated circuits operating at cryogenic temperatures down to 4 K (Cryo-CMOS) offer a higher level of system integration and scalability for future quantum computers. In this paper, we extensively discuss the role, benefits, and constraints of Cryo-CMOS for qubits control and readout. The main characteristics of the CMOS transistors and their impacts on RF circuit designs are described. Furthermore, opportunities and challenges of low noise RF signal generation and amplification are investigated.

IEEE International Symposium on Circuits and Systems proceedings•May 1, 2019•57 citations

A Review of RF and Microwave Measurement Strategies for Characterizing Cryo-CMOS Technologies in Quantum Computing

Manoj Stanley, Murat Celep, Xiaobang Shang +1 more

Successful deployment of cryo-CMOS technologies supporting quantum computing systems requires radio frequency (RF) and microwave circuitry that operates at cryogenic temperatures. The performance of this circuitry needs to be validated through reliable in-situ measurement. Two measurement modalities exist for this purpose, using either dilution refrigerators or cryogenic on-wafer probe stations. In both cases, confidence is needed in the measurements so that reliable decisions can be made concerning the performance of the RF circuitry and related cryo-CMOS technology. This paper discusses recent advances and challenges in both measurement modalities and how these advances are facilitating developments with cryo-CMOS technologies.

International Conference on Electromagnetics in Advanced Applications (ICEAA)•Sep 8, 2025•0 citations
To address the scalability challenges of traditional series-shunt RF switches, this article presents a scalable multipole N-throw (MPNT) RF switch designed for qubit quantum computers operating at cryogenic temperatures below 1 K. To demonstrate the scalability of the proposed switch in terms of the number of ports, a 4P4T switch with a series-resonance configuration was implemented. The 4P4T switch was fabricated using 65-nm bulk CMOS technology and measured at 300, 77, and 0.6 K using an on-PCB thru-reflect-line (TRL) de-embedding technique. The maximum insertion loss was measured to be 2.5 dB at 600 mK in a dilution refrigerator. The maximum isolation at 600 mK was measured as 25 dB.
In this work, we report on the electrical performance of an ultra-low-power cryo-CMOS single-pole-4-throw (SP4T) RF multiplexer working at 10 mK base temperature stage of a dilution refrigerator. We use the multiplexer to benchmark a superconducting qubit for the very first time and obtain qubit coherence times of over 35 μs along with an average single-qubit gate fidelity of 99.93%, which exceeds the threshold required for quantum error-correction based on surface-code. This work demonstrates the operability of superconducting qubits with ultra-low-power cryo-CMOS devices at the base temperature, paving the way for advanced co-integration schemes.
A scalable spin-qubit quantum processor requires fast, high-fidelity readout circuits operating at cryogenic temperatures (CTs). This work analyzes the radio frequency (RF) reflectometry readout mechanism to establish the link between conductance modulation, single-electron transistor (SET) matching network design, reflected signal power, and receiver (RX) noise temperature. Based on this analysis, a cryogenic RX architecture employing a passive switched-capacitor front-end is proposed. The front-end performs RF amplification and downconversion using transistors as switches, avoiding active RF amplification and mitigating shot-noise limitations. The RX is implemented in 40-nm CMOS and operates from 100 MHz to 2.2 GHz. Measurements demonstrate a minimum noise temperature of approximately 15 K at 4.2 K. When integrated with a quantum device, the RX achieves a signal-to-noise ratio (SNR) of 9.8 dB for a 10-µs integration time and enables 99.9% charge-state readout fidelity without external cryogenic amplifiers. This work represents the first demonstration of such fidelity using a cryo-CMOS RX and constitutes an important step toward scalable integration of qubit readout electronics.
Abstract Quantum computers based on solid state qubits have been a subject of rapid development in recent years. In current noisy intermediate-scale quantum technology, each quantum device is controlled and characterised through a dedicated signal line between room temperature and base temperature of a dilution refrigerator. This approach is not scalable and is currently limiting the development of large-scale quantum system integration and quantum device characterisation. Here we demonstrate a custom designed cryo-CMOS multiplexer operating at 32 mK. The multiplexer exhibits excellent microwave properties up to 10 GHz at room and millikelvin temperatures. We have increased the characterisation throughput with the multiplexer by measuring four high-quality factor superconducting resonators using a single input and output line in a dilution refrigerator. Our work lays the foundation for large-scale microwave quantum device characterisation and has the perspective to address the wiring problem of future large-scale quantum computers.
While large-scale fault-tolerant quantum computers promise to enable the solution to certain classes of problems for which no other efficient approach is known, such a machine is believed to require over a million performant qubits. Scaling today's 0(100) qubit superconducting (SC) quantum computers to this extent while also improving performance carries many daunting challenges, including control of such a large quantum processor (QP). Integrating the control electronics at an intermediate temperature stage within the cryostat is an attractive option, e.g., due to the inherent thermal stability of the cryogenic environment and the feasibility of connecting to the QP via dense low-loss/high-thermal-isolation SC lines [1], [2]. Several cryo-CMOS quantum controllers have been reported, with examples used to control spin [3] and transmon [1], [2] qubits. To date, IC-based quantum control experiments have focused on resonant RF control, but baseband signals are often central to the execution of gates. Here, we report the design and system characterization of a cryo-CMOS IC for generating both the RF and baseband signals required for full control of a SC QP unit-cell, and show its ability to implement the components of a high-fidelity gate set that is universal for quantum computing.
Accurate and low-noise generation and amplification of microwave signals are required for the manipulation and readout of quantum bits (qubits). A fault-tolerant quantum computer operates at deep cryogenic temperatures (i.e., <; 100mK) and requires thousands of qubits for running practical quantum algorithms. Consequently, CMOS radio-frequency (RF) integrated circuits operating at cryogenic temperatures down to 4 K (Cryo-CMOS) offer a higher level of system integration and scalability for future quantum computers. In this paper, we extensively discuss the role, benefits, and constraints of Cryo-CMOS for qubits control and readout. The main characteristics of the CMOS transistors and their impacts on RF circuit designs are described. Furthermore, opportunities and challenges of low noise RF signal generation and amplification are investigated.
Successful deployment of cryo-CMOS technologies supporting quantum computing systems requires radio frequency (RF) and microwave circuitry that operates at cryogenic temperatures. The performance of this circuitry needs to be validated through reliable in-situ measurement. Two measurement modalities exist for this purpose, using either dilution refrigerators or cryogenic on-wafer probe stations. In both cases, confidence is needed in the measurements so that reliable decisions can be made concerning the performance of the RF circuitry and related cryo-CMOS technology. This paper discusses recent advances and challenges in both measurement modalities and how these advances are facilitating developments with cryo-CMOS technologies.