We experimentally demonstrate a novel route towards efficient quantum memories, leveraging light-matter interference in alkali-based memories. Simulations show that this protocol allows for high efficiencies (> 95%) with broadband operation, while significantly reducing technical overhead.
Future optical quantum technologies, such as quantum networks, distributed quantum computing and sensing, demand efficient, broadband quantum memories. However, achieving high efficiency without introducing noise, reducing bandwidth, or limiting scalability remains a challenge. Here, we present an approach to enhance quantum memory protocols by leveraging constructive light–matter interference, leading to an increase in memory efficiency without increasing atomic density or laser intensity. We implement this method in a Raman quantum memory in warm cesium vapor and achieve more than a threefold improvement in total efficiency, reaching (34.3±8.4)%, while retaining GHz-bandwidth operation and low noise levels. Numerical simulations predict that this approach can boost efficiencies in systems limited by atomic density, such as cold atomic ensembles, from 65% to beyond 96%, while in warm atomic vapors, it could reduce the laser intensity needed to reach a given efficiency by over an order-of-magnitude, exceeding 95% total efficiency. Furthermore, our method preserves the single-mode nature of the memory at high efficiencies. This protocol is applicable to various memory architectures, paving the way toward scalable, efficient, low-noise, and high-bandwidth quantum memories.
Quantum memories will be an essential part of many quantum information protocols, including distributed quantum computing, quantum sensing, and the synchronization of repeater nodes. Most efforts toward developing such a quantum memory have been focused on matter-based storage systems, which convert the energy and information from an optical state to an atomic state of matter to be retrieved later. These matter memories, while capable of achieving great storage times, have several limitations; namely, they are inherently narrow bandwidth, they typically do not operate at key telecommunications wavelengths, and often require costly overhead in the form of cryogenics. In this work, we have developed a quantum memory that operates in free space at room temperature, allowing us to avoid all the previously mentioned limitations, and achieve a record-high time-bandwidth product.
Light is an ideal information carrier for quantum networks: its quantum properties are not degraded by noise in ambient conditions and it has a large information capacity owing to its high bandwidth. However, quantum technologies based on photonic networks have been hampered by the exponentially poor scaling of the underlying probabilistic quantum operations. Quantum optical memories, devices that store, manipulate, and release on- demand quantum light, have been identified as an indispensable network component, because they facilitate scalability. Noise-free operation of the memory is critical, since even small additional noise can render the memory classical by destroying the quantum character of the light. Here I introduce a new broadband quantum memory protocol - the off-resonant cas- caded absorption (ORCA) memory - that is inherently noise-free and operates in ambient conditions. I model ORCA theoretically, after which I characterise the classical perfor- mance of a proof-of-concept implementation in warm caesium vapour, using weak near- infrared coherent states. In order to verify quantum operation of the ORCA memory, I interface it with a broadband heralded single-photon source. I measure and compare the quantum statistics of the stored and retrieved light, observing for the first time their full preservation in a room-temperature atomic quantum memory. Finally, I make headway into integrating the ORCA vapour memory by investigating an alkali-filled hollow-core fibre platform. I use light-induced atomic desorption (LIAD) to demonstrate record- breaking alkali vapour densities in fibre, a prerequisite for efficient memory operation. Because of its technical simplicity and integrability, its high bandwidth and its low noise, ORCA provides a viable route towards next generation, photonic quantum network technologies.
The tools of atomic physics enable researchers to explore rich quantum mechanical phenomena by way of light-matter interactions. In some applications, light is used to manipulate or modify the properties of a material medium, for instance, laser-cooling and optical trapping of neutral atoms and ions; electromagnetically-induced-transparency (EIT); and Bose- Einstein-Condensation (BEC). Likewise, there are applications where matter is used to manipulate the properties of light, as for example, non-linear optical processes; atomic quantum memories; and quantum-information-processing. This thesis explores two routes towards manipulating light using matter and vice versa in our lab. The work presented in this thesis falls under two categories, one is the experimental side where we have designed and built a laser system to cool a thermal gas of 39K atoms to sub-Doppler temperatures, using the ‘Gray Molasses’ technique. This work is motivated by the long term goal of performing quantum simulation experiments with degenerate quantum gas of K. The second category is on the theoretical (numerical) side, where we introduce a novel quantum memory protocol for coherent storage and processing of broadband light pulses, based on a fundamental physical process in atomic physics, called the ‘Autler-Townes’ effect. Ultracold quantum gases are one of the most versatile systems in the field of cold atom physics; these atomic systems can be experimentally controlled and manipulated with high degree of precision and are thus, widely used to model the behavior of other complex quantum mechanical systems. Laser cooling is the first and indeed a crucial stage towards creating an ultracold gas of atoms. In this thesis, we describe an optical setup for producing a laser-cooled and trapped gas of bosonic 39K atoms, using D1 and D2 atomic transition-lines. The optical setup is built to generate appropriate laser frequencies for implementing various stages of the experiment: red- detuned two and three-dimensional magneto-optical traps (MOT) on the D2-line; a blue-detuned gray molasses phase on the D1-line; as well as optical pumping, imaging and push beams on the D2-line. We also highlight the underlying physics behind the blue-detuned gray molasses cooling and the advantages it offers in cooling species like K and Li. We also discuss in detail, the techniques used for frequency locking our lasers, namely, saturated absorption spectroscopy (SAS) and beatnote locking. The second part of the thesis describes a new atomic quantum-memory scheme for storing broadband pulses of light, which we call the ‘Autler- Townes Splitting (ATS)’ protocol. We show the light storage and retrieval operation in three different configurations, via numerical simulation of Maxwell-Bloch equations. We also discuss the strategies for getting high storage and retrieval efficiency in the ATS memory in terms of only two phenomenological parameters, both of which are experimentally accessible. We have shown that a near-unity efficiency is achievable for a wideband signal, under moderate values of atomic density and laser powers; this significantly relaxes the technical requirements of our protocol when compared to other broadband storage schemes.