Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum 2.0 Conference and Exhibition

Low Loss Fibre Bragg Grating Filters for Photon Noise Suppression

Benjamin R. Field, Chintan Mistry, Liguo Luo, G. Edvell, Joss Bland‐Hawthorn, Sergio G. Leon-Saval, John G. Bartholomew

Published Jan 1, 2025• 1 citation
Publisher

Abstract

We discuss the use of fibre Bragg grating filters to eliminate the noise associated with a pump signal in single photon experiments. We demonstrate devices with over (127.6±0.3) dB of attenuation and minimal insertion loss.
DOI
10.1364/quantum.2025.qm4b.5

Related papers

Compact stable fibre-based optical frequency filter

Jonathan P. Hedger, Andre Nicholas Luiten, Ben M. Sparkes

We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.

•Dec 30, 2019•0 citations

Bragg gratings will improve signal-to-noise in χ(3) degenerate photon-pair generation

L. G. Helt, Agata M. Brańczyk, Viola Introini +2 more

Dual-pump photon-pair sources typically suffer from parasitic pair production. To circumvent this, we propose and design a source in which parasitic pairs are suppressed by proper engineering of photonic band gaps in a Bragg grating.

Conference on Lasers and Electro-Optics•Jan 1, 2016•0 citations

Optical Stabilizer Based on Optical Bistable Devices with All-Fibre Construction

Cheng Li, Hongan Ye, Xuezeng Zhao +3 more

We propose a fibre optical stabilizer constituted by a photoelectric-hybrid optical bistable device in which fibre Bragg grating is used as a light intensity modulator. The intensity noise-reducing ability is well improved through the method by employing two feed signals. As a result, the light intensity variation can be reduced to ~1/64.

Chinese Physics Letters•Oct 27, 2004•11 citations

Pump suppressed four-wave mixing in optical fibers for correlated photon generation using feedback technique

Ankita Jain, Suchita Yadav, K. Pradeep Kumar +1 more

In this paper we propose and demonstrate a novel technique to suppress pump in four-wave mixing experiments. The residual pump powers at the fiber output are reflected by fiber-Bragg gratings (FBGs), amplified by an EDFA to compensate for pump losses in feedback path, and fed back to the fiber. With the increase in total input power to the fiber, the ratio of signal and idler to pump increases. Additional optical filters can then be used for further pump suppression. In our experiments, two pump waves of wavelengths 1549.70nm and 1549.85nm are combined using a 3dB coupler and fed to a highly-nonlinear fiber (HNLF) of length 1km, nonlinear coefficient of 12.4/W-km, and zero dispersion wavelength (ZDW) of 1513nm. Without feedback, we obtained the signal and idler to pump ratios of -21dB and -20.6dB respectively. After filtering by FBGs of 95% reflectivity and unity gain feedback, the ratio becomes - 14.1dB and -12.2dB respectively. When the residual pumps are amplified and fed back to the HNLF, the ratio improves to -7.5dB and -8.6dB indicating the potential of our method.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 20, 2014•2 citations

On-Chip Photon Pair Source with Pump Rejection Filter

Dorian Oser, Florent Mazeas, Carlos Alonso‐Ramos +5 more

Integrated photon-pair sources are fundamental building blocks of any quantum circuit. Spontaneous four-wave mixing in Si micro-resonators has already shown efficient on-chip generation of entangled photon pairs. However, owing to the substantially higher pump intensity, compared to that of the photon-pair signal, suppression of the pump requires rejection levels exceeding 100 dB. Besides strong pump suppression, narrow rejection bandwidth (<; 10 nm) is particularly important to allow short wavelength separation of the paired photons, thereby minimizing dispersion effects in the micro-ring that may reduce the efficiency of the nonlinear process. Implementing such pump-rejection filter on chip remains a challenge. Indeed, the only demonstration of photon-pair generation with on-chip pump rejection required cascading two identical chips, compromising the feasibility of the solution. The main reason for this is the limited rejection achieved by state-of-the-art on-chip Bragg filters. Ultra-high rejection has been demonstrated in actively controlled filters at the expense of increased insertion loss and a high complexity, due to the control of all the filters. Nevertheless, photon-pair generation with effective pump rejection in a single chip has not been demonstrated yet.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•2 citations

A Hybrid Optical Bistable Device Based on a Fibre Bragg Grating

Junqing Li, Qiang Chen, Qianghua Li +1 more

We propose a hybrid optical bistable device based on a fibre Bragg grating. The experimental set-up is designed by using real communication components. The optical bistable characteristics are simulated. The feedback nonlinearity and the delay time of the device are emphasized. We discuss the potential of such a device in sensor applications.

Chinese Physics Letters•Nov 21, 2002•6 citations
We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.
In this paper we propose and demonstrate a novel technique to suppress pump in four-wave mixing experiments. The residual pump powers at the fiber output are reflected by fiber-Bragg gratings (FBGs), amplified by an EDFA to compensate for pump losses in feedback path, and fed back to the fiber. With the increase in total input power to the fiber, the ratio of signal and idler to pump increases. Additional optical filters can then be used for further pump suppression. In our experiments, two pump waves of wavelengths 1549.70nm and 1549.85nm are combined using a 3dB coupler and fed to a highly-nonlinear fiber (HNLF) of length 1km, nonlinear coefficient of 12.4/W-km, and zero dispersion wavelength (ZDW) of 1513nm. Without feedback, we obtained the signal and idler to pump ratios of -21dB and -20.6dB respectively. After filtering by FBGs of 95% reflectivity and unity gain feedback, the ratio becomes - 14.1dB and -12.2dB respectively. When the residual pumps are amplified and fed back to the HNLF, the ratio improves to -7.5dB and -8.6dB indicating the potential of our method.
Integrated photon-pair sources are fundamental building blocks of any quantum circuit. Spontaneous four-wave mixing in Si micro-resonators has already shown efficient on-chip generation of entangled photon pairs. However, owing to the substantially higher pump intensity, compared to that of the photon-pair signal, suppression of the pump requires rejection levels exceeding 100 dB. Besides strong pump suppression, narrow rejection bandwidth (<; 10 nm) is particularly important to allow short wavelength separation of the paired photons, thereby minimizing dispersion effects in the micro-ring that may reduce the efficiency of the nonlinear process. Implementing such pump-rejection filter on chip remains a challenge. Indeed, the only demonstration of photon-pair generation with on-chip pump rejection required cascading two identical chips, compromising the feasibility of the solution. The main reason for this is the limited rejection achieved by state-of-the-art on-chip Bragg filters. Ultra-high rejection has been demonstrated in actively controlled filters at the expense of increased insertion loss and a high complexity, due to the control of all the filters. Nevertheless, photon-pair generation with effective pump rejection in a single chip has not been demonstrated yet.