Building a quantum computer out of silicon allows the computer’s qubits to be integrated seamlessly with their control electronics, but the control circuits can degrade qubit performance. A cryogenic control chip counters this risk and holds promise for scaling up the number of qubits. Chip made with standard processes holds promise for controlling scaled-up quantum computers.
Building a quantum computer out of silicon allows the computer’s qubits to be integrated seamlessly with their control electronics, but the control circuits can degrade qubit performance. A cryogenic control chip counters this risk and holds promise for scaling up the number of qubits. Chip made with standard processes holds promise for controlling scaled-up quantum computers.
Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.
Abstract Over the last decade, quantum computing has experienced significant changes and captured worldwide attention. In particular, superconducting qubits have become the leading candidates for scalable quantum computers, and a number of cryogenic materials have scientifically demonstrated their potential uses in constructing qubit chips. However, because of insufficient coherence time, establishing a robust and scalable quantum platform is still a long-term goal. Another consideration is the control circuits essential to initializing, operating and measuring the qubits. To keep noise low, control circuits in close proximity to the qubits require superior reliability in the cryogenic environment. The realization of the quantum advantage demands qubits with appropriate circuitry designs to maintain long coherence times and entanglement. In this work, we briefly summarize the current status of cryogenic materials for qubits and discuss typical cryogenic circuitry designs and integration techniques for qubit chips. In the end, we provide an assessment of the prospects of quantum computers and some other promising cryogenic materials.
Commercially-relevant quantum computers will require large numbers of high-performing qubits that can be manufactured, integrated, and controlled at scale. Silicon exchange-only (EO) qubits are a strong candidate modality due to their control-signal simplicity and compatibility with advanced semiconductor manufacturing, but questions remain around the achievability of sufficiently low noise and a scalable control and wiring solution. Here we introduce a quantum processing unit composed of a custom-designed cryogenic CMOS controller, a novel high-density superconducting ribbon cable, and a low-noise EO qubit device. The quantum chip features a three-rail array of 54 exchange-coupled quantum dots, configurable to host up to 18 EO qubits. We integrate and use these components to demonstrate qubit performance for both single-qubit and entangling operations that advances the EO state of the art by an order of magnitude. We further validate this system by implementing a distance-5 repetition code and a quantum error detecting code then make detailed comparisons with simulations. Our approach facilitates a utility-scale quantum computer with manageable operational and capital requirements.
Quantum computers have gained widespread interest as they can potentially solve problems that are intractable even for today’s supercomputers, such as the simulation of quantum systems as initially proposed by Feynman. To achieve such tremendous progress, a quantum computer relies on processing the information stored in quantum bits (qubits), the fundamental units of quantum computation, similar to the bits in a classical (i.e., non-quantum) processor. In general, a quantum processor comprising several qubits is connected through a quantum-to-classical interface consisting of classical electrical circuits for manipulating and reading out their quantum state. The accuracy of an operation on a qubit is characterized using the fidelity, which is 100 % in case of a perfect operation. In practice, a fidelity between 99 % and 99.9 % is typically achieved in today’s experiments with less than 100 qubits, limited by non-idealities in the control signals and by the implementation of the physical qubit itself. Since such qubit fidelities are too low to execute relevant quantum algorithms, quantum error correction schemes have been developed which rely on a much larger number of qubits to correct for possible errors, resulting in the need for quantum processors with thousands or millions of qubits. Solid-state qubits promise the largescale integration required to scale to millions of qubits, as they exploit the lithographic fabrication techniques borrowed from the semiconductor industry. However, state-of-theart solid-state qubits, such as transmons and single-electron spin qubits, must be typically cooled to cryogenic temperatures in a dilution refrigerator to exhibit quantum behavior. Because of the limited number of qubits (< 100) in state-of-theart solid-state quantum processors, the classical controller is currently implemented by general-purpose instruments or by tailor-made controllers operating at room temperature connected via several wires to the qubits in the cryogenic chamber. However, these systems must scale to support millions of qubits. While scaling up the underlying quantum processor is already exceptionally challenging, building the electronics required to interface such a large-scale processor is just as relevant and arduous.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
Abstract A key virtue of spin qubits is their sub-micron footprint, enabling a single silicon chip to host the millions of qubits required to execute useful quantum algorithms with error correction1–3. However, with each physical qubit needing multiple control lines, a fundamental barrier to scale is the extreme density of connections that bridge quantum devices to their external control and readout hardware4–6. A promising solution is to co-locate the control system proximal to the qubit platform at milli-kelvin temperatures, wired up by miniaturized interconnects7–10. Even so, heat and crosstalk from closely integrated control have the potential to degrade qubit performance, particularly for two-qubit entangling gates based on exchange coupling that are sensitive to electrical noise11,12. Here we benchmark silicon metal-oxide-semiconductor (MOS)-style electron spin qubits controlled by heterogeneously integrated cryo-complementary metal-oxide-semiconductor (cryo-CMOS) circuits with a power density sufficiently low to enable scale-up. Demonstrating that cryo-CMOS can efficiently perform universal logic operations for spin qubits, we go on to show that milli-kelvin control has little impact on the performance of single- and two-qubit gates. Given the complexity of our sub-kelvin CMOS platform, with about 100,000 transistors, these results open the prospect of scalable control based on the tight packaging of spin qubits with a ‘chiplet-style’ control architecture.