Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics B

On Rabi oscillations in ground hyperfine states of 87Rb atom driven by a microwave field

S. Sarkar, Vivek Singh, K. A. P. Singh, A. Chaudhary, Vibhuti Bhushan Tiwari, Satya Ram Mishra

Published Jul 8, 2025• 0 citations
Publisher

Abstract

We have observed the Rabi oscillations of the population of $$^{87}Rb$$ atoms in the hyperfine ground state, when a cold atom cloud prepared in the hyperfine ground state ( $$F = 1$$ ) was exposed to a microwave (MW) radiation field resonant to the $$|F = 1, m_{F} = 0>$$ $$\rightarrow$$ $$|F = 2, m_{F} = 0>$$ transition. After exposure to MW field, the atom cloud was imaged using the absorption probe method. The absorption images have revealed that population excited to the hyperfine state ( $$F = 2$$ ) varied with the position in the atom cloud, showing the position dependent atom-field coupling strength. At a given position in the atom cloud, the excited population shows Rabi oscillations between two hyperfine states. Thus, we have demonstrated that by measuring the position dependent Rabi frequency, the spatial variation of magnetic field can be measured using a cold atom cloud.

DOI
10.1007/s00340-025-08505-z

Related papers

Microwave Rabi resonances beyond the small-signal regime

А. А. Третьяков, Lindsay J. LeBlanc

The coupling between microwave fields and atoms (or atomlike systems) is inherently weaker than for optical fields, making microwave signal manipulation for applications like quantum information processing technically challenging. In order to better understand this coupling and to develop tools for measuring it, we explore the microwave coupling to atoms using the ``atomic candle'' technique, and push it beyond the bounds of the small-signal regime in order to deliver a larger signal. In familiar two-level systems, responses beyond the usual Rabi oscillations can arise when a single-tone drive is phase modulated, causing the steady-state populations to oscillate at integer harmonics of the modulation frequency. Resonant behavior of the first two harmonics for frequencies near the Rabi frequency, known as $\ensuremath{\alpha}$ and $\ensuremath{\beta}$ Rabi resonances, is widely used for microwave-field magnetometry and as a power standard known as the atomic candle. Here, we explore Rabi resonances beyond the small-signal approximation and report upon experimental observations of higher-order-harmonic population response for microwave hyperfine transitions in cold $^{87}\mathrm{Rb}$ atoms, which we compare to numerical simulations.

arXiv:1902.01971•Physical Review A•Apr 2, 2019•20 citations

Microwave spectroscopy of cold rubidium atoms

Vasily M. Entin, I. I. Ryabtsev

The effect of microwave radiation on the resonance fluorescence of a cloud of cold 85 Rb atoms in a magnetooptical trap is studied. The radiation frequency was tuned near the hyperfine splitting frequency of rubidium atoms in the 5S ground state. The microwave field induced magnetic dipole transitions between the magnetic sublevels of the 5S ( F =2) and 5S ( F =3) states, resulting in a change in the fluorescence signal. The resonance fluorescence spectra were recorded by tuning the microwave radiation frequency. The observed spectra were found to be substantially dependent on the transition under study and the frequency of a repump laser used in the cooling scheme.

arXiv:physics/0409151•Journal of Experimental and Theoretical Physics Letters•Aug 1, 2004•7 citations

Controlling the rotational and hyperfine state of ultracold Rb 87 Cs 133 molecules

Philip D. Gregory, J. Aldegunde, Jeremy M. Hutson +1 more

We demonstrate coherent control of the rotational and hyperfine state of ultracold, chemically stable $^{87}\mathrm{Rb}^{133}\mathrm{Cs}$ molecules with external microwave fields. We create a sample of $\ensuremath{\sim}2000$ molecules in the lowest hyperfine level of the rovibronic ground state $N=0$. We measure the transition frequencies to eight different hyperfine levels of the $N=1$ state at two magnetic fields $\ensuremath{\sim}23$ G apart. We determine accurate values of rotational and hyperfine coupling constants that agree well with previous calculations. We observe Rabi oscillations on each transition, allowing complete population transfer to a selected hyperfine level of $N=1$. Subsequent application of a second microwave pulse allows the transfer of molecules back to a different hyperfine level of $N=0$.

arXiv:1608.03303•Physical Review A•Oct 28, 2016•60 citations

Microwave magnetic field imaging based on Rabi resonance with an alkali-atom vapor cell

Xiaochi Liu, Songbai Kang, Zhenfei Song +3 more

In this work, we demonstrate a microwave magnetic field imaging technique based on Rabi resonance with a cesium atom vapor cell. Rabi resonance signals are generated when atoms interact with a phase-modulated microwave (MW) field and are detected by a photodiode and camera. A low noise, high quantum efficiency camera is used to capture a series of frames for different phase modulation frequencies. Rabi frequencies of each spatial point in the field can be measured by scanning the frames. Thus, the strength of the MW magnetic field distribution is obtained by combing the Rabi frequencies, measured with camera pixels in the range of the probe laser beam. The simple architecture of this imaging setup holds great potential for the construction of compact/miniature MW field sensors for material testing, field imaging of MW components, and biomedical imaging.

arXiv:1902.06447•Feb 18, 2019•0 citations

Imaging of microwave fields using ultracold atoms

Pascal Böhi, Max F. Riedel, Theodor W. Hänsch +1 more

We report a technique that uses clouds of ultracold atoms as sensitive, tunable, and noninvasive probes for microwave field imaging with micrometer spatial resolution. The microwave magnetic field components drive Rabi oscillations on atomic hyperfine transitions whose frequency can be tuned with a static magnetic field. Readout is accomplished using state-selective absorption imaging. Quantitative data extraction is simple and it is possible to reconstruct the distribution of microwave magnetic field amplitudes and phases. While we demonstrate two-dimensional imaging, an extension to three-dimensional imaging is straightforward. We use the method to determine the microwave near-field distribution around a coplanar waveguide integrated on an atom chip.

arXiv:1009.4651•Applied Physics Letters•Aug 2, 2010•85 citations

Quantum-based microwave power measurements: Proof-of-concept experiment

T. P. Crowley, Elizabeth A. Donley, Thomas P. Heavner

We present an initial proof-of-concept experiment to measure microwave power based on quantum-mechanical principles. Ground-state cesium atoms exposed to microwaves at 9.192 631 770 GHz oscillate between two hyperfine states at a rate that is proportional to the rf magnetic field strength. This provides a quantum-based method of measuring rf field strength that depends only on the fundamental parameters in the proportionality constant. A small fountain apparatus was used to prepare laser-cooled cesium atoms in a single hyperfine state, which were then launched through a cylindrical cavity operating in the TE011 mode. After passing through the cavity, the fraction of atoms in the two hyperfine states was measured. Rabi oscillations between the two states were observed as a function of microwave field strength. The scaling with field strength and with time in the cavity agreed with theory to within 0.4%. The field strength in the cavity was used, together with measured S parameters, to determine the microwave power incident at a reference plane outside the fountain apparatus. The difference between the quantum-based microwave power measurement and a traditional microwave power measurement was less than 5% of the measured power.

Review of Scientific Instruments•Jul 27, 2004•38 citations
We have observed the Rabi oscillations of the population of 87Rb^{87}Rb87Rb atoms in the hyperfine ground state, when a cold atom cloud prepared in the hyperfine ground state ( F=1F = 1F=1 ) was exposed to a microwave (MW) radiation field resonant to the ∣F=1,mF=0>|F = 1, m_{F} = 0>∣F=1,mF​=0> →\rightarrow→ ∣F=2,mF=0>|F = 2, m_{F} = 0>∣F=2,mF​=0> transition. After exposure to MW field, the atom cloud was imaged using the absorption probe method. The absorption images have revealed that population excited to the hyperfine state ( F=2F = 2F=2 ) varied with the position in the atom cloud, showing the position dependent atom-field coupling strength. At a given position in the atom cloud, the excited population shows Rabi oscillations between two hyperfine states. Thus, we have demonstrated that by measuring the position dependent Rabi frequency, the spatial variation of magnetic field can be measured using a cold atom cloud.
The coupling between microwave fields and atoms (or atomlike systems) is inherently weaker than for optical fields, making microwave signal manipulation for applications like quantum information processing technically challenging. In order to better understand this coupling and to develop tools for measuring it, we explore the microwave coupling to atoms using the ``atomic candle'' technique, and push it beyond the bounds of the small-signal regime in order to deliver a larger signal. In familiar two-level systems, responses beyond the usual Rabi oscillations can arise when a single-tone drive is phase modulated, causing the steady-state populations to oscillate at integer harmonics of the modulation frequency. Resonant behavior of the first two harmonics for frequencies near the Rabi frequency, known as $\ensuremath{\alpha}$ and $\ensuremath{\beta}$ Rabi resonances, is widely used for microwave-field magnetometry and as a power standard known as the atomic candle. Here, we explore Rabi resonances beyond the small-signal approximation and report upon experimental observations of higher-order-harmonic population response for microwave hyperfine transitions in cold 87Rb^{87}\mathrm{Rb}87Rb atoms, which we compare to numerical simulations.
The effect of microwave radiation on the resonance fluorescence of a cloud of cold 85 Rb atoms in a magnetooptical trap is studied. The radiation frequency was tuned near the hyperfine splitting frequency of rubidium atoms in the 5S ground state. The microwave field induced magnetic dipole transitions between the magnetic sublevels of the 5S ( F =2) and 5S ( F =3) states, resulting in a change in the fluorescence signal. The resonance fluorescence spectra were recorded by tuning the microwave radiation frequency. The observed spectra were found to be substantially dependent on the transition under study and the frequency of a repump laser used in the cooling scheme.
We demonstrate coherent control of the rotational and hyperfine state of ultracold, chemically stable 87Rb133Cs^{87}\mathrm{Rb}^{133}\mathrm{Cs}87Rb133Cs molecules with external microwave fields. We create a sample of $\ensuremath{\sim}2000$ molecules in the lowest hyperfine level of the rovibronic ground state N=0N=0N=0. We measure the transition frequencies to eight different hyperfine levels of the N=1N=1N=1 state at two magnetic fields $\ensuremath{\sim}23$ G apart. We determine accurate values of rotational and hyperfine coupling constants that agree well with previous calculations. We observe Rabi oscillations on each transition, allowing complete population transfer to a selected hyperfine level of N=1N=1N=1. Subsequent application of a second microwave pulse allows the transfer of molecules back to a different hyperfine level of N=0N=0N=0.
In this work, we demonstrate a microwave magnetic field imaging technique based on Rabi resonance with a cesium atom vapor cell. Rabi resonance signals are generated when atoms interact with a phase-modulated microwave (MW) field and are detected by a photodiode and camera. A low noise, high quantum efficiency camera is used to capture a series of frames for different phase modulation frequencies. Rabi frequencies of each spatial point in the field can be measured by scanning the frames. Thus, the strength of the MW magnetic field distribution is obtained by combing the Rabi frequencies, measured with camera pixels in the range of the probe laser beam. The simple architecture of this imaging setup holds great potential for the construction of compact/miniature MW field sensors for material testing, field imaging of MW components, and biomedical imaging.
We report a technique that uses clouds of ultracold atoms as sensitive, tunable, and noninvasive probes for microwave field imaging with micrometer spatial resolution. The microwave magnetic field components drive Rabi oscillations on atomic hyperfine transitions whose frequency can be tuned with a static magnetic field. Readout is accomplished using state-selective absorption imaging. Quantitative data extraction is simple and it is possible to reconstruct the distribution of microwave magnetic field amplitudes and phases. While we demonstrate two-dimensional imaging, an extension to three-dimensional imaging is straightforward. We use the method to determine the microwave near-field distribution around a coplanar waveguide integrated on an atom chip.
We present an initial proof-of-concept experiment to measure microwave power based on quantum-mechanical principles. Ground-state cesium atoms exposed to microwaves at 9.192 631 770 GHz oscillate between two hyperfine states at a rate that is proportional to the rf magnetic field strength. This provides a quantum-based method of measuring rf field strength that depends only on the fundamental parameters in the proportionality constant. A small fountain apparatus was used to prepare laser-cooled cesium atoms in a single hyperfine state, which were then launched through a cylindrical cavity operating in the TE011 mode. After passing through the cavity, the fraction of atoms in the two hyperfine states was measured. Rabi oscillations between the two states were observed as a function of microwave field strength. The scaling with field strength and with time in the cavity agreed with theory to within 0.4%. The field strength in the cavity was used, together with measured S parameters, to determine the microwave power incident at a reference plane outside the fountain apparatus. The difference between the quantum-based microwave power measurement and a traditional microwave power measurement was less than 5% of the measured power.