Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Dallas Circuits and Systems Conference (DCAS)

Fault Tolerance Enhancements for Quantum Data Encodings

Aviraj Sinha, Mitchell Aaron Thornton

Published Apr 11, 2025• 1 citation
Publisher

Abstract

Data quality is an important factor in quantum computation, since quantum algorithms need high quality representations in order to run with low error rates. In addition, quantum algorithms benefit from different types of quantum data encodings that are tailored to specific applications. In order to improve data quality while maintaining data variety, this work applies fault tolerance techniques specific to different types of data encodings. Thus, fault tolerance improvements, aimed at reducing both noise and bias errors, are applied to two types of data encodings. The first type, angle encoding, benefits from an enhanced dynamic range representation. The second type, distribution encoding, is enhanced through the use of error correcting states. Our experiments encode classical data as a quantum state, apply noise simulations, and provide error analyses on the decoded data. Experimental results are assessed by comparing the post-processed output statistics to those of the original encodings and show improved accuracy through the inclusion of fault tolerance methods.

DOI
10.1109/dcas65331.2025.11045458

Related papers

Design, decoding, and fault-tolerant implementation of quantum error-correcting codes

Diego Forlivesi

Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.

•Jun 29, 2026•0 citations

Fault-tolerant quantum processing of physical experiments

Ishaan Kannan, Harald Putterman, Jordan Cotler

Quantum computers may reveal features of Nature inaccessible to conventional experiments, but manipulating raw quantum data introduces noise that degrades inference even when the processor is fault-tolerant, creating a data-input bottleneck for robust quantum learning. Here we show that quantum fault tolerance can substantially improve the sample complexity of learning from noisy experiments. We encode unknown quantum states from physical experiments into protected quantum memory, enabling fault-tolerant implementations of quantum learning algorithms otherwise degraded by errors. Using this quantum uploading procedure, we prove that noisy randomized measurement and multi-copy learning tasks can be performed exponentially faster than by any adaptive strategy that does not immediately encode physical states into error-corrected memory. These separations are not simply due to a reduced effective noise rate: they hold even when uploading is substantially noisier than the bare experimental interface, rigorously establishing immediate encoding as the optimal approach to noise-robust learning. We numerically illustrate the speedups in astronomical imaging, where quantum processing of uploaded photons locates an exoplanet obscured by a bright star using orders of magnitude fewer shots than unencoded baselines. Our results establish a robust interface between quantum computers and natural systems, enabling powerful and practical quantum-enhanced experiments.

quant-pharXiv:2605.02057•May 5, 2026•7 citations

New methods in quantum error correction and fault-tolerant quantum computing

Christopher Chamberland

Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.

•Oct 22, 2018•0 citations

Models of fault-tolerant quantum computation

Christopher M. Dawson

This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.

•Jan 1, 2006•0 citations

Fault-Tolerant Quantum Input/Output

Matthias Christandl, Omar Fawzi, Ashutosh Goswami

Usual scenarios of fault-tolerant computation are concerned with the fault-tolerant realization of quantum algorithms that compute classical functions, such as Shor’s algorithm for factoring. In particular, this means that input and output to the quantum algorithm are classical. In contrast to stand-alone single-core quantum computers, in many distributed scenarios, quantum information might have to be passed on from one quantum information processing system to another one, possibly via noisy quantum communication channels with noise levels above fault-tolerant thresholds. In such situations, quantum information processing devices will have quantum inputs, quantum outputs or even both, which pass qubits among each other. Working in the fault-tolerant framework of [Kitaev, 1997], we show that any quantum circuit with quantum input and output can be transformed into a fault-tolerant circuit that produces the ideal circuit with some controlled noise applied at the input and output. The framework allows the direct composition of the statements, enabling versatile future applications. We illustrate this with a concrete application, namely, communication over a noisy channel with faulty encoding and decoding operations [Christandl and Müller-Hermes, 2024]. For communication codes with linear minimum distance, we construct fault-tolerant encoders and decoders for general noise (including coherent errors). For the weaker, but standard model of local stochastic noise, we obtain fault-tolerant encoders and decoders for any communication code that can correct a constant fraction of random errors.

arXiv:2408.05260•IEEE Transactions on Information Theory•Mar 10, 2026•11 citations

Measure Now, Mitigate Later: Virtual Error Cancellation for Logical Quantum Circuits

Oles Shtanko, Saswata Roy, Shashwat Kumar +1 more

Early fault-tolerant quantum algorithms are a key step in scalable quantum computing, but are ultimately constrained by residual, uncorrectable logical errors. Logical quantum error mitigation can eliminate this bias, however its standard requirements include prior noise characterization, more complex experiments, and substantial sampling overhead. Although no mitigation technique can simultaneously overcome all three constraints, we demonstrate that the first two---noise learning and need for modified circuits---can be completely bypassed for logical circuits by leveraging only syndrome records. Specifically, we introduce virtual error cancellation: a method that, unlike previous bias-free approaches, operates entirely in classical post-processing on universal quantum circuits. We develop and numerically test end-to-end protocols that reduce the sampling overhead beyond fundamental limitations of existing syndrome-aware mitigation techniques, including syndrome-based postselection. In particular, we propose a scheme that pairs the low-latency decoder used in the experiment with a high-complexity decoder run in post-processing. In numerical simulations of a distance-7 rotated surface code, we show that our full-stack dual-decoder algorithm exhibits an error that diminishes as the number of samples increases, capable of reaching more than three orders of magnitude of suppression compared to the decoded logical error rate in an experimentally achievable setting. These results establish syndrome records as a resource for correcting universal computational estimates after quantum execution.

quant-pharXiv:2610.12400•Oct 9, 2026•1 citation
Data quality is an important factor in quantum computation, since quantum algorithms need high quality representations in order to run with low error rates. In addition, quantum algorithms benefit from different types of quantum data encodings that are tailored to specific applications. In order to improve data quality while maintaining data variety, this work applies fault tolerance techniques specific to different types of data encodings. Thus, fault tolerance improvements, aimed at reducing both noise and bias errors, are applied to two types of data encodings. The first type, angle encoding, benefits from an enhanced dynamic range representation. The second type, distribution encoding, is enhanced through the use of error correcting states. Our experiments encode classical data as a quantum state, apply noise simulations, and provide error analyses on the decoded data. Experimental results are assessed by comparing the post-processed output statistics to those of the original encodings and show improved accuracy through the inclusion of fault tolerance methods.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Quantum computers may reveal features of Nature inaccessible to conventional experiments, but manipulating raw quantum data introduces noise that degrades inference even when the processor is fault-tolerant, creating a data-input bottleneck for robust quantum learning. Here we show that quantum fault tolerance can substantially improve the sample complexity of learning from noisy experiments. We encode unknown quantum states from physical experiments into protected quantum memory, enabling fault-tolerant implementations of quantum learning algorithms otherwise degraded by errors. Using this quantum uploading procedure, we prove that noisy randomized measurement and multi-copy learning tasks can be performed exponentially faster than by any adaptive strategy that does not immediately encode physical states into error-corrected memory. These separations are not simply due to a reduced effective noise rate: they hold even when uploading is substantially noisier than the bare experimental interface, rigorously establishing immediate encoding as the optimal approach to noise-robust learning. We numerically illustrate the speedups in astronomical imaging, where quantum processing of uploaded photons locates an exoplanet obscured by a bright star using orders of magnitude fewer shots than unencoded baselines. Our results establish a robust interface between quantum computers and natural systems, enabling powerful and practical quantum-enhanced experiments.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
Usual scenarios of fault-tolerant computation are concerned with the fault-tolerant realization of quantum algorithms that compute classical functions, such as Shor’s algorithm for factoring. In particular, this means that input and output to the quantum algorithm are classical. In contrast to stand-alone single-core quantum computers, in many distributed scenarios, quantum information might have to be passed on from one quantum information processing system to another one, possibly via noisy quantum communication channels with noise levels above fault-tolerant thresholds. In such situations, quantum information processing devices will have quantum inputs, quantum outputs or even both, which pass qubits among each other. Working in the fault-tolerant framework of [Kitaev, 1997], we show that any quantum circuit with quantum input and output can be transformed into a fault-tolerant circuit that produces the ideal circuit with some controlled noise applied at the input and output. The framework allows the direct composition of the statements, enabling versatile future applications. We illustrate this with a concrete application, namely, communication over a noisy channel with faulty encoding and decoding operations [Christandl and Müller-Hermes, 2024]. For communication codes with linear minimum distance, we construct fault-tolerant encoders and decoders for general noise (including coherent errors). For the weaker, but standard model of local stochastic noise, we obtain fault-tolerant encoders and decoders for any communication code that can correct a constant fraction of random errors.
Early fault-tolerant quantum algorithms are a key step in scalable quantum computing, but are ultimately constrained by residual, uncorrectable logical errors. Logical quantum error mitigation can eliminate this bias, however its standard requirements include prior noise characterization, more complex experiments, and substantial sampling overhead. Although no mitigation technique can simultaneously overcome all three constraints, we demonstrate that the first two---noise learning and need for modified circuits---can be completely bypassed for logical circuits by leveraging only syndrome records. Specifically, we introduce virtual error cancellation: a method that, unlike previous bias-free approaches, operates entirely in classical post-processing on universal quantum circuits. We develop and numerically test end-to-end protocols that reduce the sampling overhead beyond fundamental limitations of existing syndrome-aware mitigation techniques, including syndrome-based postselection. In particular, we propose a scheme that pairs the low-latency decoder used in the experiment with a high-complexity decoder run in post-processing. In numerical simulations of a distance-7 rotated surface code, we show that our full-stack dual-decoder algorithm exhibits an error that diminishes as the number of samples increases, capable of reaching more than three orders of magnitude of suppression compared to the decoded logical error rate in an experimentally achievable setting. These results establish syndrome records as a resource for correcting universal computational estimates after quantum execution.