Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Beyond Classical Limits: Quantum Superposition and Inner Friction in a Quantum Mechanical Engine

Dehua Liu, Yingying Hong, Jianhui Wang

Published Jun 22, 2025• 4 citations
Publisher

Abstract

Abstract We propose a quantum Otto engine operating through a cycle of two isochoric processes, where the working substance interacts with a single-mode radiation field, and two unitary strokes, during which the working substance is decoupled from the field. We investigate the influence of quantum superposition and quantum internal friction on the engine’s power output and efficiency, demonstrating that these quantum effects enhance both performance metrics. While these enhancements are accompanied by increased power fluctuations, we show that such fluctuations can be effectively mitigated through careful selection of control parameters. Our results reveal that the proposed quantum Otto engine can achieve performance regimes that are thermally inconceivable in classical systems, including surpassing the Otto efficiency limit and attaining 100% efficiency with nonzero power output.

DOI
10.1088/0256-307x/42/8/080001

Related papers

Feedback-driven quantum Otto-like engines

Dehua Liu, Yingying Hong, Shaolin Luo +3 more

An analytical study of a feedback-driven quantum engine based on a two-level system is presented. This engine is similar to a quantum Otto engine but substitutes the quantum isochoric process with a feedback-driven operation based on a measured observable $A(\ensuremath{\theta})$, whose eigenstates are coherent superpositions of energy eigenstates. Projective measurements control the feedback operations, while work extraction or heat absorption occurs during driven operations. We derive the general time-dependent efficiency, power, and power fluctuations. Quantum coherence is examined through three mechanisms: (i) coherence associated with $\ensuremath{\theta}\ensuremath{\ne}0$, (ii) residual coherence after incomplete thermalization, and (iii) coherence generated by the interaction between the system and a coherent laser pulse on resonance. We investigate how the parameter $\ensuremath{\theta}$, quantum coherence, and timing of unitary and feedback-driven strokes influence engine performance. We demonstrate that quantum coherence can significantly enhance power output and efficiency while reducing fluctuations through optimal cycle parameter adjustments.

Physical Review A•Jan 3, 2025•6 citations

Efficiency at maximum power of a heat engine working with a two-level atomic system

Rui Wang, Jianhui Wang, Jizhou He +1 more

We consider the finite-time operation of a quantum heat engine whose working substance is composed of a two-level atomic system. The engine cycle, consisting of two quantum adiabatic and two quantum isochoric (constant-frequency) processes and working between two heat reservoirs at temperatures ${T}_{h}$ and ${T}_{c}$$(<$${T}_{h})$, is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.

Physical Review E•Apr 23, 2013•77 citations

Finite-time quantum Otto engine with a squeezed thermal bath: Role of quantum coherence and squeezing in the performance and fluctuations

Xiao Ping Yang, Dehua Liu, Jizhou He +2 more

We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.

arXiv:2205.13290•May 26, 2022•6 citations

Quantum Otto cycle with inner friction: finite-time and disorder effects

A Alecce, Fernando Galve, Nicola Lo Gullo +3 more

The concept of inner friction, by which a quantum heat engine is unable to follow adiabatically its strokes and thus dissipates useful energy, is illustrated in an exact physical model where the working substance consists of an ensemble of misaligned spins interacting with a magnetic field and performing the Otto cycle. The effect of this static disorder under a finite-time cycle gives a new perspective of the concept of inner friction under realistic settings. We investigate the efficiency and power of this engine and relate its performance to the amount of friction from misalignment and to the temperature difference between heat baths. Finally we propose an alternative experimental implementation of the cycle where the spin is encoded in the degree of polarization of photons.

arXiv:1507.03417•New Journal of Physics•Jul 9, 2015•64 citations

Employing coherence to improve the performance of a quantum heat engine

Patrice A. Camati, Jonas F. G. Santos, Roberto M. Serra

The working substance fueling a quantum heat engine may contain prominent quantum properties such as coherence and nonclassical correlations. In particular, coherence has been somewhat related to quantum friction, whose origin has been mostly associated with the noncommutativity of a driven Hamiltonian at different times. Here, we consider a quantum Otto heat engine operated at finite time and undergoing incomplete thermalization with a heat source. We introduce analytical expressions relating the engine efficiency and extractable power to the coherence measured in the energy basis of the working substance during the engine cycle. We show that coherence, which has been related to an increase in entropy production and irreversibility, can in also be employed to improve the quantum engine performance, mitigating quantum friction. Such an improvement may be achieved by carefully tuning cycle parameters. To illustrate this coherent improvement we performed a numerical analysis in an experimentally feasible example.

•Dec 20, 2018•2 citations

Coherence effects in the performance of the quantum Otto heat engine

Patrice A. Camati, Jonas F. G. Santos, Roberto M. Serra

The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interferencelike effect between the residual coherence (after the incomplete thermalization) and the coherence generated in the subsequent finite-time stroke. We introduce analytical expressions highlighting the role of coherence and examine how this dynamical interference effect influences the engine performance. Additionally, in this scenario in which coherence is present along the cycle, we argue that the careful tuning of the cycle parameters may exploit this interference effect and make coherence acts like a dynamical quantum lubricant. To illustrate this, we numerically consider an experimentally feasible example and compare the engine performance to the performance of a similar engine where the residual coherence is completely erased, ruling out the dynamical interference effect.

arXiv:1812.08728•Physical Review A•Jun 10, 2019•166 citations
Abstract We propose a quantum Otto engine operating through a cycle of two isochoric processes, where the working substance interacts with a single-mode radiation field, and two unitary strokes, during which the working substance is decoupled from the field. We investigate the influence of quantum superposition and quantum internal friction on the engine’s power output and efficiency, demonstrating that these quantum effects enhance both performance metrics. While these enhancements are accompanied by increased power fluctuations, we show that such fluctuations can be effectively mitigated through careful selection of control parameters. Our results reveal that the proposed quantum Otto engine can achieve performance regimes that are thermally inconceivable in classical systems, including surpassing the Otto efficiency limit and attaining 100% efficiency with nonzero power output.
An analytical study of a feedback-driven quantum engine based on a two-level system is presented. This engine is similar to a quantum Otto engine but substitutes the quantum isochoric process with a feedback-driven operation based on a measured observable $A(\ensuremath{\theta})$, whose eigenstates are coherent superpositions of energy eigenstates. Projective measurements control the feedback operations, while work extraction or heat absorption occurs during driven operations. We derive the general time-dependent efficiency, power, and power fluctuations. Quantum coherence is examined through three mechanisms: (i) coherence associated with $\ensuremath{\theta}\ensuremath{\ne}0$, (ii) residual coherence after incomplete thermalization, and (iii) coherence generated by the interaction between the system and a coherent laser pulse on resonance. We investigate how the parameter $\ensuremath{\theta}$, quantum coherence, and timing of unitary and feedback-driven strokes influence engine performance. We demonstrate that quantum coherence can significantly enhance power output and efficiency while reducing fluctuations through optimal cycle parameter adjustments.
We consider the finite-time operation of a quantum heat engine whose working substance is composed of a two-level atomic system. The engine cycle, consisting of two quantum adiabatic and two quantum isochoric (constant-frequency) processes and working between two heat reservoirs at temperatures Th{T}_{h}Th​ and Tc{T}_{c}Tc​(<(<(<Th){T}_{h})Th​), is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.
We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.
The concept of inner friction, by which a quantum heat engine is unable to follow adiabatically its strokes and thus dissipates useful energy, is illustrated in an exact physical model where the working substance consists of an ensemble of misaligned spins interacting with a magnetic field and performing the Otto cycle. The effect of this static disorder under a finite-time cycle gives a new perspective of the concept of inner friction under realistic settings. We investigate the efficiency and power of this engine and relate its performance to the amount of friction from misalignment and to the temperature difference between heat baths. Finally we propose an alternative experimental implementation of the cycle where the spin is encoded in the degree of polarization of photons.
The working substance fueling a quantum heat engine may contain prominent quantum properties such as coherence and nonclassical correlations. In particular, coherence has been somewhat related to quantum friction, whose origin has been mostly associated with the noncommutativity of a driven Hamiltonian at different times. Here, we consider a quantum Otto heat engine operated at finite time and undergoing incomplete thermalization with a heat source. We introduce analytical expressions relating the engine efficiency and extractable power to the coherence measured in the energy basis of the working substance during the engine cycle. We show that coherence, which has been related to an increase in entropy production and irreversibility, can in also be employed to improve the quantum engine performance, mitigating quantum friction. Such an improvement may be achieved by carefully tuning cycle parameters. To illustrate this coherent improvement we performed a numerical analysis in an experimentally feasible example.
The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interferencelike effect between the residual coherence (after the incomplete thermalization) and the coherence generated in the subsequent finite-time stroke. We introduce analytical expressions highlighting the role of coherence and examine how this dynamical interference effect influences the engine performance. Additionally, in this scenario in which coherence is present along the cycle, we argue that the careful tuning of the cycle parameters may exploit this interference effect and make coherence acts like a dynamical quantum lubricant. To illustrate this, we numerically consider an experimentally feasible example and compare the engine performance to the performance of a similar engine where the residual coherence is completely erased, ruling out the dynamical interference effect.