Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Advanced Physics Research

Enhancing Signal Purity in Josephson Structure Measurements

Ivan A. Nazhestkin, Georgy I. Gubochkin, Jonathan Shvartzberg, Sai‐Prasad M. Rajam, Sergey V. Egorov, Vladimir L. Gurtovoi, V. V. Ryazanov, Vasily S. Stolyarov, Dmitry S. Yakovlev

Published Jun 9, 2025• 5 citations
Publisher

Abstract

Abstract Superconducting Josephson structures play a significant role in quantum‐state engineering. Achieving high‐fidelity quantum state measurements in superconducting Josephson structures requires ultra‐low noise environments and robust signal purification techniques. Here, the advanced low‐noise signal measurement system designed for dilution refrigerators is presented, integrating multi‐stage cryogenic filtering and electromagnetic shielding strategies to suppress noise sources across a broad frequency spectrum. The effectiveness of low‐pass RC filters is demonstrated, silver‐epoxy microwave absorbers, and optimized ground isolation to achieve an unprecedented noise reduction, enabling sub‐nanoampere switching current distribution measurements superior to commerical systems at mK temperatures. The system is optimized for precision studies of superconductor‐insulator‐superconductor, superconductor‐ferromagnet‐superconductor, and superconductor‐normal metal‐superconductor Josephson junctions with low critical currents. This approach establishes a reliable framework for next‐generation quantum electronic experiments, ensuring that observed switching phenomena are governed by intrinsic device physics rather than environmental perturbations.

DOI
10.1002/apxr.202500032

Related papers

A cryogen-free dilution refrigerator based Josephson qubit measurement system

Ye F. Tian, Hui Yu, Hui Deng +9 more

We develop a small-signal measurement system on cryogen-free dilution refrigerator which is suitable for superconducting qubit studies. Cryogen-free refrigerators have several advantages such as less manpower for system operation and large sample space for experiment, but concern remains about whether the noise introduced by the coldhead can be made sufficiently low. In this work, we demonstrate some effective approaches of acoustic isolation to reduce the noise impact. The electronic circuit that includes the current, voltage, and microwave lines for qubit coherent state measurement is described. For the current and voltage lines designed to have a low pass of dc-100 kHz, we show that the measurements of Josephson junction's switching current distribution with a width down to 1 nA, and quantum coherent Rabi oscillation and Ramsey interference of the superconducting qubit can be successfully performed.

Review of Scientific Instruments•Mar 1, 2012•18 citations

Cryogenic Materials and Ultra-Low Noise Environments: Advancements in Quantum Hardware Fabrication for Fault-Tolerant Qubits

Dr. B. Kezia Rani

Quantum computing is transitioning from theoretical development to scalable hardware implementation, yet qubit instability caused by thermal noise, decoherence, electromagnetic interference, and material imperfections remains a central barrier to achieving fault-tolerant quantum processing. Cryogenic materials and ultra-low noise environments have emerged as foundational requirements in stabilizing qubit operation, prolonging coherence time, and enabling quantum error correction for large-scale computational reliability. This paper investigates critical advancements in cryogenic superconductors, magnetic-shielding architectures, dilution refrigeration systems, noise-suppressed signal routing, phonon-limited material engineering, and quantum-grade chip fabrication. Through experimental and simulated benchmarking, we analyze coherence improvements, qubit lifetimes, fabrication tolerances, and environmental noise thresholds necessary for fault-tolerant operation. Data findings confirm that next-generation cryogenic material stacks reduce qubit error rates by 83%, increase coherence time >500 μs in transmon qubits, and support quantum error correction thresholds for practical scalability. The study provides a roadmap for manufacturing stable quantum hardware through material purity innovations, thermal isolation architectures, and cryogenic noise-management frameworks.

Quantum Frontiers Journal•Nov 6, 2025•0 citations

Observation of metastable states in a superconducting Josephson circuit using an Andreev interferometer

Andrea Iagallo

We report on measurements of macroscopic quantum states in superconducting Josephson circuits using a highly sensitive hybrid quantum interferometer as the readout probe. The investigated Josephson circuit is one of the leading candidates as solid-state qubits (persistent current qubit), which are known to exhibit macroscopic quantum states with atomic-like properties. The readout device is a modified Andreev interferometer with semi-metallic normal segment in a “folded" geometry, and is designed to reduce the back action during measurement, as well as minimising the electromagnetic coupling between the circuit and the environment.\n A pulsed lock-in technique has been developed to perform continuous readout of the superconductor phase difference using pulse lengths down to 10 ns. The technique enables to control the energy of the probing quasiparticles in the normal segment of the interferometer, which in turn allows to control of the supercurrent owing in the SNS junction and prevents electron heating of the normal segment.\n An experimental set-up was designed and installed in a dilution fridge consisting of shielded wiring, magnetic screens, RF tight sample holder and printed circuit board to allow the injection of high frequency excitation signals, while minimising the environment effect on the qubit through careful electrical filtering. The effect of strong RF irradiation on Andreev interferometers allowed us to estimate the response time of the readout device to be less than 40 ps.\n The measurements show that two macroscopically distinct metastable states exist when the device is biased at the qubit degeneracy point, between which the system makes transitions that can be continuously monitored. Real time kinetics of the system has been investigated at different magnetic fluxes, pulse parameters, temperature and RF radiation. Based on statistical analysis of the transitions, we argue that the metastability is connected with macroscopic quantum tunnelling effects rather than thermal excitation. The experimental data support the hypothesis of a large low frequency noise causing low transition rates.

•Jan 1, 2011•0 citations

Noise measurement system at electron temperature down to 20 mK with combinations of the low pass filters

Masayuki Hashisaka, Yoshiaki Yamauchi, Kensaku Chida +3 more

We developed a quantum noise measurement system in a dilution refrigerator by using three kinds of cryogenic low pass filters. One of them is a commercial low pass filter inserted into the noise measurement lines instead of the conventional powder filter, which assures well-defined circuit parameters necessary for the noise measurement at a finite frequency. We checked that this filter gives sufficiently large attenuation up to 20 GHz at room temperature, 77 and 4.2 K. The electron temperature of the mesoscopic device placed in the present system was confirmed to be down to around 20 mK by measuring the thermal noise of the device.

Review of Scientific Instruments•Sep 1, 2009•21 citations

Tunable Josephson Generator for Qubit Excitation and Two‐Tone Spectroscopy

M. M. Khrenov, Rustam D. Yusupov, Georgy I. Gubochkin +15 more

ABSTRACT We present a tunable Josephson generator that enables direct qubit excitation and two‐tone spectroscopy while reducing cryogenic wiring complexity and thermal load. The device consists of a current‐biased Josephson junction integrated with a superconducting spiral resonator, forming a microwave source that operates at cryogenic temperatures. Unlike conventional qubit drive setups that require coaxial microwave lines from room temperature to the base stage, our system requires only a single direct current (DC) bias line from room temperature. The generated microwave signal is delivered to the qubit via a short coaxial line between the 4 K and 20 mK stages, significantly reducing wiring complexity, thermal load in the cryostat and leveraging unused volume at the 4 K stage. We demonstrate continuous‐wave excitation of a superconducting qubit and perform tunable two‐tone spectroscopy using the Josephson generator as the drive source, resolving qubit spectra with performance comparable to a standard microwave source. Our generator is characterized by low phase noise and can be phase‐locked to an external reference for enhanced stability. Operating at 4 K temperature, this self‐contained source offers a low‐noise, space‐efficient solution for qubit control and spectroscopy, paving the way for scalable cryogenic quantum control architectures.

Advanced Quantum Technologies•Dec 1, 2025•1 citation

Design and Analysis on a Cryogenic Current Amplifier with a Superconducting Microwave Resonator

Yuma Okazaki, Nobu‐Hisa Kaneko

We propose a new type of cryogenic current amplifiers, in which low-frequency power spectrum of current can be measured through a measurement of microwave response of a superconducting resonant circuit shunted by a series array of Josephson junctions. From numerical analysis on the equivalent circuit, the numerical value of the input-referred current noise of the proposed amplifier is found to be two orders of magnitude lower than the noise floor measured with the conventional cryogenic current amplifiers based on high-electron-mobility transistors or superconducting quantum interference devices. Our proposal can open new avenues for investigating low-temperature solid-state devices that require lower noise and wider bandwidth power spectrum measurements of current.

arXiv:1508.03131•IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•0 citations
Abstract Superconducting Josephson structures play a significant role in quantum‐state engineering. Achieving high‐fidelity quantum state measurements in superconducting Josephson structures requires ultra‐low noise environments and robust signal purification techniques. Here, the advanced low‐noise signal measurement system designed for dilution refrigerators is presented, integrating multi‐stage cryogenic filtering and electromagnetic shielding strategies to suppress noise sources across a broad frequency spectrum. The effectiveness of low‐pass RC filters is demonstrated, silver‐epoxy microwave absorbers, and optimized ground isolation to achieve an unprecedented noise reduction, enabling sub‐nanoampere switching current distribution measurements superior to commerical systems at mK temperatures. The system is optimized for precision studies of superconductor‐insulator‐superconductor, superconductor‐ferromagnet‐superconductor, and superconductor‐normal metal‐superconductor Josephson junctions with low critical currents. This approach establishes a reliable framework for next‐generation quantum electronic experiments, ensuring that observed switching phenomena are governed by intrinsic device physics rather than environmental perturbations.
We develop a small-signal measurement system on cryogen-free dilution refrigerator which is suitable for superconducting qubit studies. Cryogen-free refrigerators have several advantages such as less manpower for system operation and large sample space for experiment, but concern remains about whether the noise introduced by the coldhead can be made sufficiently low. In this work, we demonstrate some effective approaches of acoustic isolation to reduce the noise impact. The electronic circuit that includes the current, voltage, and microwave lines for qubit coherent state measurement is described. For the current and voltage lines designed to have a low pass of dc-100 kHz, we show that the measurements of Josephson junction's switching current distribution with a width down to 1 nA, and quantum coherent Rabi oscillation and Ramsey interference of the superconducting qubit can be successfully performed.
Quantum computing is transitioning from theoretical development to scalable hardware implementation, yet qubit instability caused by thermal noise, decoherence, electromagnetic interference, and material imperfections remains a central barrier to achieving fault-tolerant quantum processing. Cryogenic materials and ultra-low noise environments have emerged as foundational requirements in stabilizing qubit operation, prolonging coherence time, and enabling quantum error correction for large-scale computational reliability. This paper investigates critical advancements in cryogenic superconductors, magnetic-shielding architectures, dilution refrigeration systems, noise-suppressed signal routing, phonon-limited material engineering, and quantum-grade chip fabrication. Through experimental and simulated benchmarking, we analyze coherence improvements, qubit lifetimes, fabrication tolerances, and environmental noise thresholds necessary for fault-tolerant operation. Data findings confirm that next-generation cryogenic material stacks reduce qubit error rates by 83%, increase coherence time >500 μs in transmon qubits, and support quantum error correction thresholds for practical scalability. The study provides a roadmap for manufacturing stable quantum hardware through material purity innovations, thermal isolation architectures, and cryogenic noise-management frameworks.
We report on measurements of macroscopic quantum states in superconducting Josephson circuits using a highly sensitive hybrid quantum interferometer as the readout probe. The investigated Josephson circuit is one of the leading candidates as solid-state qubits (persistent current qubit), which are known to exhibit macroscopic quantum states with atomic-like properties. The readout device is a modified Andreev interferometer with semi-metallic normal segment in a “folded" geometry, and is designed to reduce the back action during measurement, as well as minimising the electromagnetic coupling between the circuit and the environment.\n A pulsed lock-in technique has been developed to perform continuous readout of the superconductor phase difference using pulse lengths down to 10 ns. The technique enables to control the energy of the probing quasiparticles in the normal segment of the interferometer, which in turn allows to control of the supercurrent owing in the SNS junction and prevents electron heating of the normal segment.\n An experimental set-up was designed and installed in a dilution fridge consisting of shielded wiring, magnetic screens, RF tight sample holder and printed circuit board to allow the injection of high frequency excitation signals, while minimising the environment effect on the qubit through careful electrical filtering. The effect of strong RF irradiation on Andreev interferometers allowed us to estimate the response time of the readout device to be less than 40 ps.\n The measurements show that two macroscopically distinct metastable states exist when the device is biased at the qubit degeneracy point, between which the system makes transitions that can be continuously monitored. Real time kinetics of the system has been investigated at different magnetic fluxes, pulse parameters, temperature and RF radiation. Based on statistical analysis of the transitions, we argue that the metastability is connected with macroscopic quantum tunnelling effects rather than thermal excitation. The experimental data support the hypothesis of a large low frequency noise causing low transition rates.
We developed a quantum noise measurement system in a dilution refrigerator by using three kinds of cryogenic low pass filters. One of them is a commercial low pass filter inserted into the noise measurement lines instead of the conventional powder filter, which assures well-defined circuit parameters necessary for the noise measurement at a finite frequency. We checked that this filter gives sufficiently large attenuation up to 20 GHz at room temperature, 77 and 4.2 K. The electron temperature of the mesoscopic device placed in the present system was confirmed to be down to around 20 mK by measuring the thermal noise of the device.
ABSTRACT We present a tunable Josephson generator that enables direct qubit excitation and two‐tone spectroscopy while reducing cryogenic wiring complexity and thermal load. The device consists of a current‐biased Josephson junction integrated with a superconducting spiral resonator, forming a microwave source that operates at cryogenic temperatures. Unlike conventional qubit drive setups that require coaxial microwave lines from room temperature to the base stage, our system requires only a single direct current (DC) bias line from room temperature. The generated microwave signal is delivered to the qubit via a short coaxial line between the 4 K and 20 mK stages, significantly reducing wiring complexity, thermal load in the cryostat and leveraging unused volume at the 4 K stage. We demonstrate continuous‐wave excitation of a superconducting qubit and perform tunable two‐tone spectroscopy using the Josephson generator as the drive source, resolving qubit spectra with performance comparable to a standard microwave source. Our generator is characterized by low phase noise and can be phase‐locked to an external reference for enhanced stability. Operating at 4 K temperature, this self‐contained source offers a low‐noise, space‐efficient solution for qubit control and spectroscopy, paving the way for scalable cryogenic quantum control architectures.
We propose a new type of cryogenic current amplifiers, in which low-frequency power spectrum of current can be measured through a measurement of microwave response of a superconducting resonant circuit shunted by a series array of Josephson junctions. From numerical analysis on the equivalent circuit, the numerical value of the input-referred current noise of the proposed amplifier is found to be two orders of magnitude lower than the noise floor measured with the conventional cryogenic current amplifiers based on high-electron-mobility transistors or superconducting quantum interference devices. Our proposal can open new avenues for investigating low-temperature solid-state devices that require lower noise and wider bandwidth power spectrum measurements of current.