Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Systematical study of effects of chip parameters and control waveforms on fidelity of CZ gate

WANG Shi, Zheng Yan, HOU Jie, YE Yongjin, Jiaping Yang, WU Yongzheng

Published Jan 1, 2025• 0 citations
Publisher

Abstract

Efficient and high-fidelity two-qubit gates are crucial to achieving fault-tolerant quantum computing and have become one of the key research topics in the quantum computing field. The fidelity of quantum gate is affected by many factors, such as quantum chip parameters and control waveforms. In theory, the chip paramters and waveforms can be precisely designed. However, in practice, the actual chip parameters and waveforms may deviate from the theoretical values. It is necessary to systematically study the effects of chip parameters, control waveforms, and other factors on the fidelity of two-qubit gate, and determine the magnitude and direction of the each factor’s effect. Here, we systematically study the effects of chip parameters, control waveforms, coupler start frequency, qubit frequency, etc. on the fidelity of CZ gate. On this basis, the response of gate fidelity to deviations in control parameters is further studied. At the chip design level, quantum chips based on CBQ parameters can achieve higher-fidelity CZ gate in shorter gate operation time. In terms of controlling waveforms, the three-level Fourier series wave is superior to the square wave and rounded trapezoidal wave in achieving lower gate error rate and shorter gate operation time, and can better meet the requirements for efficient implementation of high-fidelity quantum gates. Factors such as the coupler starting frequency and qubit frequency have relatively little effect on the fidelity of the CZ gate. In a wide frequency range, high-fidelity CZ gate can always be achieved by optimizing the control waveform parameters. It should be pointed out that slight deviations of control parameters will lead to a significant increase in gate error. This study is of great significance for clarifying the effects of various factors on the fidelity of the CZ gate. It can provide theoretical and technical support for designing superconducting quantum chips and realizing high-fidelity CZ gate, thereby promoting the engineering development of quantum computing.

DOI
10.7498/aps.74.20250108

Related papers

Closed-loop optimization for high-fidelity controlled- Z gates in superconducting qubits

N.J. Glaser, Federico Roy, Ivan Tsitsilin +13 more

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

arXiv:2412.17454•Physical Review Applied•Jul 15, 2025•12 citations

High-fidelity controlled- σZ gate for resonator-based superconducting quantum computers

Joydip Ghosh, Andrei Galiautdinov, Zhongyuan Zhou +3 more

A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9$%$ (99.99$%$) fidelity in about $17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$ ($23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$) with a realistic two-parameter pulse profile, plus two auxiliary $z$ rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a $99.9%$ cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.

arXiv:1301.1719•Physical Review A•Feb 8, 2013•94 citations

Designing and modeling of flexible and high-fidelity two-qubit gate and coupler for superconducting qubits

Zhongyi Jiang

Quantum computing holds great promise for both scientific discovery and commercial applications. Superconducting quantum systems have become one of the leading architectures for large-scale quantum computing. Towards realizing practical quantum computing, improving two-qubit gate fidelity is a crucial task. It is relevant for both near-term pre-fault-tolerant quantum computers and future fault-tolerant quantum computers. This dissertation aims to provide a comprehensive study of two-qubit gates in superconducting systems. The major focus is on improving gate fidelity via using different drive schemes and coupler designs. The dissertation contains two primary original contributions. First, a novel method for implementing continuous fSim gates is proposed and analyzed in detail. The fSim gate set is a family of gates that combines $i$SWAP gate and CPHASE gate into one gate with variable rotation angles and conditional phase. This gate set is particularly interesting for quantum simulation of fermionic systems. Second, a theoretical framework for multi-mode couplers is developed. A multi-mode coupler design is proposed to enable fully localized decoupling among qubits and independent control of qubit-qubit interactions in different excitation subspaces. An example of two qubits coupled by a two-mode coupler is studied in detail. Building on the fSim gate theory and multi-mode coupler design, several future research directions are outlined. Pulse-level algorithms for simulating electronic systems are discussed as a key application of fSim gates. A three-mode coupler architecture is further introduced. In addition, the importance of incorporating open-system dynamics for accurate modeling of coupler behavior and gate performance is emphasized. Finally, a unified framework for modeling superconducting quantum processors is proposed, providing a systematic way to compare gate fidelities across theoretical approaches and ultimately guide improvements in quantum hardware performance.

•Jan 1, 2026•0 citations

Realization of High-Fidelity CZ and Z Z -Free iSWAP Gates with a Tunable Coupler

Youngkyu Sung, Leon Ding, Jochen Braumüller +14 more

High-fidelity two-qubit gates at scale are a key requirement to realize the full promise of quantum computation and simulation. The advent and use of coupler elements to tunably control two-qubit interactions has improved operational fidelity in many-qubit systems by reducing parasitic coupling and frequency crowding issues. Nonetheless, two-qubit gate errors still limit the capability of near-term quantum applications. The reason, in part, is the existing framework for tunable couplers based on the dispersive approximation does not fully incorporate three-body multi-level dynamics, which is essential for addressing coherent leakage to the coupler and parasitic longitudinal ($ZZ$) interactions during two-qubit gates. Here, we present a systematic approach that goes beyond the dispersive approximation to exploit the engineered level structure of the coupler and optimize its control. Using this approach, we experimentally demonstrate CZ and $ZZ$-free iSWAP gates with two-qubit interaction fidelities of $99.76 \pm 0.07$% and $99.87 \pm 0.23$%, respectively, which are close to their $T_1$ limits.

arXiv:2011.01261•Physical Review X•Jun 16, 2021•348 citations

Realization of High-Fidelity Controlled-Phase Gates in Extensible Superconducting Qubits Design with a Tunable Coupler

Yangsen Ye, Sirui Cao, Yulin Wu +20 more

High-fidelity two-qubit gates are essential for the realization of large-scale quantum computation and simulation. Tunable coupler design is used to reduce the problem of parasitic coupling and frequency crowding in many-qubit systems and thus thought to be advantageous. Here we design an extensible 5-qubit system in which center transmon qubit can couple to every four near-neighboring qubits via a capacitive tunable coupler and experimentally demonstrate high-fidelity controlled-phase (CZ) gate by manipulating central qubit and one near-neighboring qubit. Speckle purity benchmarking and cross entropy benchmarking are used to assess the purity fidelity and the fidelity of the CZ gate. The average purity fidelity of the CZ gate is 99.69±0.04% and the average fidelity of the CZ gate is 99.65±0.04%, which means that the control error is about 0.04%. Our work is helpful for resolving many challenges in implementation of large-scale quantum systems.

arXiv:2109.05680•Chinese Physics Letters•Nov 1, 2021•31 citations

High-Precision Calibration Workflow Achieves Above $99.9\%$ CZ Gate Fidelity on a Scalable Superconducting Processor

Huili Zhang, Meiling Li, Shuang Yang +6 more

High-fidelity universal two-qubit gates are critical for building fault-tolerant quantum computers. In scalable superconducting processors, shortened coherence times introduce more incoherent errors in gate operations. With a constrained error budget, there is reduced tolerance for coherent errors stemming from parameter deviations. In this work, we develop a closed-loop workflow to enhance the CZ gate calibration precision. Utilizing the echoed leakage error amplification (ELEA) and the repurposed context-aware fidelity estimation (CAFE) circuits, we suppress the population leakage to non-computational states, and, for the first time, demonstrate a CZ gate fidelity exceeding $99.9\%$ on an 84-qubit processor, with coherent error suppressed to $0.007\%$. Meanwhile, we obtain a median fidelity of $99.25\%$ among 72 CZ gates, demonstrating that the workflow can be generalized to the calibration of parallel CZ gates. Finally, we realize automated calibration and observe enhanced stability of the CZ gate throughout 9-hour comparative monitoring experiments. Our results, realized on a completely domestic platform, establish an efficient and automated route to quantum computation with superconducting quantum systems.

quant-pharXiv:2607.01422•Jul 3, 2026•5 citations
Efficient and high-fidelity two-qubit gates are crucial to achieving fault-tolerant quantum computing and have become one of the key research topics in the quantum computing field. The fidelity of quantum gate is affected by many factors, such as quantum chip parameters and control waveforms. In theory, the chip paramters and waveforms can be precisely designed. However, in practice, the actual chip parameters and waveforms may deviate from the theoretical values. It is necessary to systematically study the effects of chip parameters, control waveforms, and other factors on the fidelity of two-qubit gate, and determine the magnitude and direction of the each factor’s effect. Here, we systematically study the effects of chip parameters, control waveforms, coupler start frequency, qubit frequency, etc. on the fidelity of CZ gate. On this basis, the response of gate fidelity to deviations in control parameters is further studied. At the chip design level, quantum chips based on CBQ parameters can achieve higher-fidelity CZ gate in shorter gate operation time. In terms of controlling waveforms, the three-level Fourier series wave is superior to the square wave and rounded trapezoidal wave in achieving lower gate error rate and shorter gate operation time, and can better meet the requirements for efficient implementation of high-fidelity quantum gates. Factors such as the coupler starting frequency and qubit frequency have relatively little effect on the fidelity of the CZ gate. In a wide frequency range, high-fidelity CZ gate can always be achieved by optimizing the control waveform parameters. It should be pointed out that slight deviations of control parameters will lead to a significant increase in gate error. This study is of great significance for clarifying the effects of various factors on the fidelity of the CZ gate. It can provide theoretical and technical support for designing superconducting quantum chips and realizing high-fidelity CZ gate, thereby promoting the engineering development of quantum computing.
Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.
A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9% (99.99%) fidelity in about 17ns17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}17ns (23ns23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}23ns) with a realistic two-parameter pulse profile, plus two auxiliary zzz rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a 99.999.9%99.9 cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.
Quantum computing holds great promise for both scientific discovery and commercial applications. Superconducting quantum systems have become one of the leading architectures for large-scale quantum computing. Towards realizing practical quantum computing, improving two-qubit gate fidelity is a crucial task. It is relevant for both near-term pre-fault-tolerant quantum computers and future fault-tolerant quantum computers. This dissertation aims to provide a comprehensive study of two-qubit gates in superconducting systems. The major focus is on improving gate fidelity via using different drive schemes and coupler designs. The dissertation contains two primary original contributions. First, a novel method for implementing continuous fSim gates is proposed and analyzed in detail. The fSim gate set is a family of gates that combines iiiSWAP gate and CPHASE gate into one gate with variable rotation angles and conditional phase. This gate set is particularly interesting for quantum simulation of fermionic systems. Second, a theoretical framework for multi-mode couplers is developed. A multi-mode coupler design is proposed to enable fully localized decoupling among qubits and independent control of qubit-qubit interactions in different excitation subspaces. An example of two qubits coupled by a two-mode coupler is studied in detail. Building on the fSim gate theory and multi-mode coupler design, several future research directions are outlined. Pulse-level algorithms for simulating electronic systems are discussed as a key application of fSim gates. A three-mode coupler architecture is further introduced. In addition, the importance of incorporating open-system dynamics for accurate modeling of coupler behavior and gate performance is emphasized. Finally, a unified framework for modeling superconducting quantum processors is proposed, providing a systematic way to compare gate fidelities across theoretical approaches and ultimately guide improvements in quantum hardware performance.
High-fidelity two-qubit gates at scale are a key requirement to realize the full promise of quantum computation and simulation. The advent and use of coupler elements to tunably control two-qubit interactions has improved operational fidelity in many-qubit systems by reducing parasitic coupling and frequency crowding issues. Nonetheless, two-qubit gate errors still limit the capability of near-term quantum applications. The reason, in part, is the existing framework for tunable couplers based on the dispersive approximation does not fully incorporate three-body multi-level dynamics, which is essential for addressing coherent leakage to the coupler and parasitic longitudinal (ZZZZZZ) interactions during two-qubit gates. Here, we present a systematic approach that goes beyond the dispersive approximation to exploit the engineered level structure of the coupler and optimize its control. Using this approach, we experimentally demonstrate CZ and ZZZZZZ-free iSWAP gates with two-qubit interaction fidelities of 99.76±0.0799.76 \pm 0.0799.76±0.07% and 99.87±0.2399.87 \pm 0.2399.87±0.23%, respectively, which are close to their T1T_1T1​ limits.
High-fidelity two-qubit gates are essential for the realization of large-scale quantum computation and simulation. Tunable coupler design is used to reduce the problem of parasitic coupling and frequency crowding in many-qubit systems and thus thought to be advantageous. Here we design an extensible 5-qubit system in which center transmon qubit can couple to every four near-neighboring qubits via a capacitive tunable coupler and experimentally demonstrate high-fidelity controlled-phase (CZ) gate by manipulating central qubit and one near-neighboring qubit. Speckle purity benchmarking and cross entropy benchmarking are used to assess the purity fidelity and the fidelity of the CZ gate. The average purity fidelity of the CZ gate is 99.69±0.04% and the average fidelity of the CZ gate is 99.65±0.04%, which means that the control error is about 0.04%. Our work is helpful for resolving many challenges in implementation of large-scale quantum systems.
High-Precision Calibration Workflow Achieves Above 99.9%99.9\%99.9% CZ Gate Fidelity on a Scalable Superconducting Processor
High-fidelity universal two-qubit gates are critical for building fault-tolerant quantum computers. In scalable superconducting processors, shortened coherence times introduce more incoherent errors in gate operations. With a constrained error budget, there is reduced tolerance for coherent errors stemming from parameter deviations. In this work, we develop a closed-loop workflow to enhance the CZ gate calibration precision. Utilizing the echoed leakage error amplification (ELEA) and the repurposed context-aware fidelity estimation (CAFE) circuits, we suppress the population leakage to non-computational states, and, for the first time, demonstrate a CZ gate fidelity exceeding 99.9%99.9\%99.9% on an 84-qubit processor, with coherent error suppressed to 0.007%0.007\%0.007%. Meanwhile, we obtain a median fidelity of 99.25%99.25\%99.25% among 72 CZ gates, demonstrating that the workflow can be generalized to the calibration of parallel CZ gates. Finally, we realize automated calibration and observe enhanced stability of the CZ gate throughout 9-hour comparative monitoring experiments. Our results, realized on a completely domestic platform, establish an efficient and automated route to quantum computation with superconducting quantum systems.