Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Optics and Photon Counting

Single photon detectors based on superconducting nano/microstrips for applications at short-wavelength infrared

L. Parlato, C. Cirillo, Pasquale Ercolano, Ciro Bruscino, Martina Peluso, Mikkel Ejrnaes, Daniela Salvoni, Chengjun Zhang, Francesco Colangelo, Francesco Avitabile, Z. Makhdoumi Kakhaki, C. Attanasio, Giovanni Piero Pepe

Published Jun 6, 2025• 0 citations
Publisher
DOI
10.1117/12.3058448

Related papers

Superconducting nanowires for mid-infrared single-photon detectors

Yuehua Chen, Shuqian Qiao, Dapeng Yu +2 more

Device•May 20, 2026•0 citations

Single photon detection in NbRe superconducting microstrips

Mikkel Ejrnaes, C. Cirillo, Daniela Salvoni +7 more

Detection of single infrared photons in superconducting microstrips of 4 nm thick disordered Nb0.15Re0.85 has been investigated. Microstrips with a critical temperature of 5.15 K and widths from 1.0 to 2.5 μm have been fabricated by optical lithography. We demonstrate single photon detection sensitivity at 1.5 μm wavelength at a temperature of 1.79 K. By investigating the detection process at this temperature, we find that the current bias threshold is at 21% of the depairing current. This threshold is similar to what should be observed in typical amorphous superconductors, which confirms that ultrathin disordered Nb0.15Re0.85 is an interesting material for superconducting microstrip single photon detectors that operate above 1 K.

Applied Physics Letters•Dec 26, 2022•30 citations

Superconducting nanowire single photon detectors for infrared communications

Francesco Bellei

•Jan 1, 2017•0 citations

Millimeter-scale active area superconducting microstrip single-photon detector fabricated by ultraviolet photolithography

Guangzhao Xu, Weijun Zhang, Lixing You +7 more

The effective and convenient detection of single photons via advanced detectors with a large active area is becoming significant for quantum and classical applications. This work demonstrates the fabrication of a superconducting microstrip single-photon detector (SMSPD) with a millimeter-scale active area via the use of ultraviolet (UV) photolithography. The performances of NbN SMSPDs with different active areas and strip widths are characterized. SMSPDs fabricated by UV photolithography and electron beam lithography with small active areas are also compared from the aspects of the switching current density and line edge roughness. Furthermore, an SMSPD with an active area of 1 mm × 1 mm is obtained via UV photolithography, and during operation at 0.85 K, it exhibits near-saturated internal detection efficiency at wavelengths up to 800 nm. At a wavelength of 1550 nm, the detector exhibits a system detection efficiency of ∼5% (7%) and a timing jitter of 102 (144) ps, when illuminated with a light spot of ∼18 (600) µm in diameter, respectively.

arXiv:2304.06921•Optics Express•Apr 24, 2023•13 citations

Large-Area Niobium Titanium Nitride Superconducting Microstrip Single-Photon Detector Fabricated Using a Photolithography Process

Masahiro Yabuno, Fumihiro China, Shigehito Miki +1 more

In this paper, we present a large-area niobium titanium nitride (NbTiN) superconducting microstrip single-photon detector (SMSPD) fabricated using a photolithography process. We fabricated a 1-μm-wide NbTiN-SMSPD covering 420 × 420 μm2active area with a filling factor of 20% using an i-line stepper. The detector is cooled down to approximately 2.2 K, and its performance is evaluated at the wavelengths from visible to near-infrared. The detector operates stably without a shunt resistor and shows single-photon sensitivity for photons with a wavelength of 1550 nm. The bias current dependence of the detection count rate is measured at the wavelengths from 406 to 1550 nm. The saturation of the detection count rate with increasing the bias current was successfully observed at wavelengths below 850 nm, suggesting an internal detection efficiency approaching 100%. Furthermore, we evaluated the timing jitter performance using the femtosecond pulse laser with a wavelength of 1550 nm. Consequently, we achieved a system timing jitter of 85 ps for a light spot diameter of 100 μm.

IEEE Transactions on Applied Superconductivity•Feb 24, 2023•10 citations

Development of superconducting nanostrip single photon detector system III

Shigehito Miki, Shigeyuki Miyajima, Masahiro Yabuno +2 more

The Japan Society of Applied Physics•Jan 26, 2021•0 citations
Detection of single infrared photons in superconducting microstrips of 4 nm thick disordered Nb0.15Re0.85 has been investigated. Microstrips with a critical temperature of 5.15 K and widths from 1.0 to 2.5 μm have been fabricated by optical lithography. We demonstrate single photon detection sensitivity at 1.5 μm wavelength at a temperature of 1.79 K. By investigating the detection process at this temperature, we find that the current bias threshold is at 21% of the depairing current. This threshold is similar to what should be observed in typical amorphous superconductors, which confirms that ultrathin disordered Nb0.15Re0.85 is an interesting material for superconducting microstrip single photon detectors that operate above 1 K.
The effective and convenient detection of single photons via advanced detectors with a large active area is becoming significant for quantum and classical applications. This work demonstrates the fabrication of a superconducting microstrip single-photon detector (SMSPD) with a millimeter-scale active area via the use of ultraviolet (UV) photolithography. The performances of NbN SMSPDs with different active areas and strip widths are characterized. SMSPDs fabricated by UV photolithography and electron beam lithography with small active areas are also compared from the aspects of the switching current density and line edge roughness. Furthermore, an SMSPD with an active area of 1 mm × 1 mm is obtained via UV photolithography, and during operation at 0.85 K, it exhibits near-saturated internal detection efficiency at wavelengths up to 800 nm. At a wavelength of 1550 nm, the detector exhibits a system detection efficiency of ∼5% (7%) and a timing jitter of 102 (144) ps, when illuminated with a light spot of ∼18 (600) µm in diameter, respectively.
In this paper, we present a large-area niobium titanium nitride (NbTiN) superconducting microstrip single-photon detector (SMSPD) fabricated using a photolithography process. We fabricated a 1-μm-wide NbTiN-SMSPD covering 420 × 420 μm2active area with a filling factor of 20% using an i-line stepper. The detector is cooled down to approximately 2.2 K, and its performance is evaluated at the wavelengths from visible to near-infrared. The detector operates stably without a shunt resistor and shows single-photon sensitivity for photons with a wavelength of 1550 nm. The bias current dependence of the detection count rate is measured at the wavelengths from 406 to 1550 nm. The saturation of the detection count rate with increasing the bias current was successfully observed at wavelengths below 850 nm, suggesting an internal detection efficiency approaching 100%. Furthermore, we evaluated the timing jitter performance using the femtosecond pulse laser with a wavelength of 1550 nm. Consequently, we achieved a system timing jitter of 85 ps for a light spot diameter of 100 μm.