Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Thermodynamics

Quantum thermal engine with spin 1/2 system and geometric phases and interference obtained by unitary transformations of mixed states

Y. Ben-Aryeh

Published Jun 1, 2025• 0 citations
Publisher

Abstract

Quantum Carnot engine whose working medium is a two-dimensional spin 1/2 system, with a time-dependent magnetic field in the symmetric z direction is described. The dynamic of this engine is obtained by using four steps, where in two steps the system is coupled alternatively to hot and cold heat baths, and in the other two steps the time development is adiabatic and isentropic (with constant entropy). The conditions for getting a reversible Carnot cycle and the role of time duration for its irreversibility are discussed. Since the calculations are made for the expectation values of the Hamiltonian, only dynamical phases are obtained which cannot be used for interference effects. An alternative method is developed for getting geometric phases, which can be used in interferometry. Parallel transport equations for pure states are generalized to mixed states by which dynamical phases are eliminated. The geometric phases are derived by unitary SU(2) transformations, including time-dependent parameters which are a function of the magnetic fields interactions. A special form of the unitary transformation for the mixed thermal states is developed, by which geometric phases are obtained, which are different from those obtained in NMR and neutron interferometry.

DOI
10.5541/ijot.1395683

Related papers

Quantum dynamic and geometric phases in harmonic oscillator, spin 1/2 and two-level thermal engines systems

Y. Ben-Aryeh

Dynamical phases are obtained for a quantum thermal engine, whose working medium is a single harmonic oscillator. The dynamics of this engine is obtained by using four steps where in two steps the time dependent frequency is changing. In the other two steps, the thermal engine is coupled alternatively to hot and cold heat baths. Similar dynamical phases are obtained in a quantum thermal engine whose working medium is spin 1/2 system. The role of times durations of such steps in the quantum engines for getting maximal efficiency is analyzed. The dynamic of charge pumping in a quantum dot coupled to two reservoirs is studied. The effects of many modulation parameters including their fluctuations for getting geometric phases are analyzed. Since the separate steps in thermal engines describe non-cyclic circuits, we propose to use a special method for measuring geometric phases in thermal engines for non-cyclic circuits which is gauge invariant.

arXiv:2212.02970•Dec 1, 2022•3 citations

Quantum heat engines with Carnot efficiency at maximum power

Mohit Lal Bera, Sergi Julià-Farré, Maciej Lewenstein +1 more

Heat engines constitute the major building blocks of modern technologies. However, conventional heat engines with higher power yield lesser efficiency and vice versa and respect various power-efficiency trade-off relations. This is also assumed to be true for the engines operating in the quantum regime. Here we show that these relations are not fundamental. We introduce quantum heat engines that deliver maximum power with Carnot efficiency in the one-shot finite-size regime. These engines are composed of working systems with a finite number of quantum particles and are restricted to one-shot measurements. The engines operate in a one-step cycle by letting the working system simultaneously interact with hot and cold baths via semilocal thermal operations. By allowing quantum entanglement between its constituents and, thereby, a coherent transfer of heat from hot to cold baths, the engine implements the fastest possible reversible state transformation in each cycle, resulting in maximum power and Carnot efficiency. Finally, we propose a physically realizable engine using quantum optical systems.

arXiv:2106.01193•Physical Review Research•Feb 25, 2022•33 citations

Comparative study of quantum Otto and Carnot engines powered by a spin working substance

Mahmoud Youssef Abd‐Rabbou, Atta Ur Rahman, Mikhail A. Yurischev +1 more

Quantum Otto and Carnot engines have recently been receiving attention due to their ability to achieve high efficiencies and powers based on the laws of quantum mechanics. This paper discusses the theory, progress, and possible applications of quantum Otto and Carnot engines, such as energy production, cooling, and nanoscale technologies. In particular, we investigate a two-spin Heisenberg system that works as a substance in quantum Otto and Carnot cycles while exposed to an external magnetic field with both Dzyaloshinsky-Moriya and dipole-dipole interactions. The four stages of engine cycles are subject to analysis with respect to the heat exchanges that occur between the hot and cold reservoirs, alongside the work done during each stage. The operating conditions of the heat engine, refrigerator, thermal accelerator, and heater are all achieved. Moreover, our results demonstrate that the laws of thermodynamics are strictly upheld and the Carnot cycle produces more useful work than that of the Otto cycle.

Physical review. E•Sep 7, 2023•34 citations

A quantum-mechanical heat engine operating in finite time. A model consisting of spin-1/2 systems as the working fluid

Eitan Geva, Ronnie Kosloff

The finite-time operation of a quantum-mechanical heat engine with a working fluid consisting of many noninteracting spin-1/2 systems is considered. The engine is driven by an external, time-dependent and nonrotating magnetic field. The cycle of operation consists of two adiabats and two isotherms. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are developed. The irreversible operation of this engine is studied in three cases: (1) The sudden limit, where the performance is found to be the same as that of the spin analog of the Otto cycle. This case provides the lower bound of efficiency. (2) The step-cycle operation scheme. Here, the optimization of power is carried out in the high-temperature limit (the ‘‘classical’’ limit). The results obtained are similar to those of Andresen et al. [Phys. Rev. A 15, 2086 (1977)]. (3) The Curzon–Ahlborn operation scheme. The semigroup approach is used to model the dynamics. Then the power production is optimized. All the results obtained for Newtonian engines operating by the same scheme, such as the Curzon–Ahlborn efficiency, apply in the high-temperature limit. These results are obtained without the additional assumption of proximity to thermal equilibrium, implicitly implied by the use of Newtonian heat conduction in the original derivation. It seems that the results of the Curzon–Ahlborn analysis are always obtained in the high-temperature limit, irrespective of the details of the model. The performance beyond the classical limit is optimized numerically. The classical approximation is found to be valid for most of the spin-polarization range. The deviations from the classical limit depend heavily upon the specific nature of both the working fluid and the heat baths and exhibit great diversity and complexity.

The Journal of Chemical Physics•Feb 15, 1992•335 citations

Construction and optimization of a quantum analog of the Carnot cycle

Gaoyang Xiao, Jiangbin Gong

The quantum analog of Carnot cycles in few-particle systems consists of two quantum adiabatic steps and two isothermal steps. This construction is formally justified by use of a minimum work principle. It is then shown, using minimal assumptions of work or heat in nanoscale systems, that the heat-to-work efficiency of such quantum heat engine cycles can be further optimized via two conditions regarding the expectation value of some generalized force operators evaluated at equilibrium states. In general the optimized efficiency is system specific, lower than the Carnot efficiency, and dependent upon both temperatures of the cold and hot reservoirs. Simple computational examples are used to illustrate our theory. The results should be an important guide towards the design of favorable working conditions of a realistic quantum heat engine.

arXiv:1503.00784•Physical Review E•Jul 13, 2015•24 citations

Performance optimization on finite-time quantum Carnot engines and refrigerators based on spin-1/2 systems driven by a squeezed reservoir

Haoguang Liu, Jizhou He, Jianhui Wang

We investigate the finite-time performance of a quantum endoreversible Carnot engine cycle and its inverse operation — Carnot refrigeration cycle, employing a spin-1/2 system as the working substance. The thermal machine is alternatively driven by a hot boson bath of inverse temperature β h and a cold boson bath at inverse temperature β c (>β h). While for the engine model the hot bath is constructed to be squeezed, in the refrigeration cycle the cold bath is established to be squeezed, with squeezing parameter r. We obtain the analytical expressions for both efficiency and power in heat engines and for coefficient of performance and cooling rate in refrigerators. We find that, in the high-temperature limit, the efficiency at maximum power is bounded by the analytical value η + = 1 − sech ( 2 r ) ( 1 − η C ) , and the coefficient of performance at the maximum figure of merit is limited by ε + = sech ( 2 r ) ( 1 + ε C ) sech ( 2 r ) ( 1 + ε C ) − ε C − 1 , where η C = 1 – β h/β c and ε C = β h/(β c – β h) are the respective Carnot values of the engines and refrigerators. These analytical results are identical to those obtained from the Carnot engines based on harmonic systems, indicating that the efficiency at maximum power and coefficient at maximum figure of merit are independent of the working substance.

Chinese Physics B•Nov 11, 2022•7 citations
Quantum Carnot engine whose working medium is a two-dimensional spin 1/2 system, with a time-dependent magnetic field in the symmetric z direction is described. The dynamic of this engine is obtained by using four steps, where in two steps the system is coupled alternatively to hot and cold heat baths, and in the other two steps the time development is adiabatic and isentropic (with constant entropy). The conditions for getting a reversible Carnot cycle and the role of time duration for its irreversibility are discussed. Since the calculations are made for the expectation values of the Hamiltonian, only dynamical phases are obtained which cannot be used for interference effects. An alternative method is developed for getting geometric phases, which can be used in interferometry. Parallel transport equations for pure states are generalized to mixed states by which dynamical phases are eliminated. The geometric phases are derived by unitary SU(2) transformations, including time-dependent parameters which are a function of the magnetic fields interactions. A special form of the unitary transformation for the mixed thermal states is developed, by which geometric phases are obtained, which are different from those obtained in NMR and neutron interferometry.
Dynamical phases are obtained for a quantum thermal engine, whose working medium is a single harmonic oscillator. The dynamics of this engine is obtained by using four steps where in two steps the time dependent frequency is changing. In the other two steps, the thermal engine is coupled alternatively to hot and cold heat baths. Similar dynamical phases are obtained in a quantum thermal engine whose working medium is spin 1/2 system. The role of times durations of such steps in the quantum engines for getting maximal efficiency is analyzed. The dynamic of charge pumping in a quantum dot coupled to two reservoirs is studied. The effects of many modulation parameters including their fluctuations for getting geometric phases are analyzed. Since the separate steps in thermal engines describe non-cyclic circuits, we propose to use a special method for measuring geometric phases in thermal engines for non-cyclic circuits which is gauge invariant.
Heat engines constitute the major building blocks of modern technologies. However, conventional heat engines with higher power yield lesser efficiency and vice versa and respect various power-efficiency trade-off relations. This is also assumed to be true for the engines operating in the quantum regime. Here we show that these relations are not fundamental. We introduce quantum heat engines that deliver maximum power with Carnot efficiency in the one-shot finite-size regime. These engines are composed of working systems with a finite number of quantum particles and are restricted to one-shot measurements. The engines operate in a one-step cycle by letting the working system simultaneously interact with hot and cold baths via semilocal thermal operations. By allowing quantum entanglement between its constituents and, thereby, a coherent transfer of heat from hot to cold baths, the engine implements the fastest possible reversible state transformation in each cycle, resulting in maximum power and Carnot efficiency. Finally, we propose a physically realizable engine using quantum optical systems.
Quantum Otto and Carnot engines have recently been receiving attention due to their ability to achieve high efficiencies and powers based on the laws of quantum mechanics. This paper discusses the theory, progress, and possible applications of quantum Otto and Carnot engines, such as energy production, cooling, and nanoscale technologies. In particular, we investigate a two-spin Heisenberg system that works as a substance in quantum Otto and Carnot cycles while exposed to an external magnetic field with both Dzyaloshinsky-Moriya and dipole-dipole interactions. The four stages of engine cycles are subject to analysis with respect to the heat exchanges that occur between the hot and cold reservoirs, alongside the work done during each stage. The operating conditions of the heat engine, refrigerator, thermal accelerator, and heater are all achieved. Moreover, our results demonstrate that the laws of thermodynamics are strictly upheld and the Carnot cycle produces more useful work than that of the Otto cycle.
The finite-time operation of a quantum-mechanical heat engine with a working fluid consisting of many noninteracting spin-1/2 systems is considered. The engine is driven by an external, time-dependent and nonrotating magnetic field. The cycle of operation consists of two adiabats and two isotherms. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are developed. The irreversible operation of this engine is studied in three cases: (1) The sudden limit, where the performance is found to be the same as that of the spin analog of the Otto cycle. This case provides the lower bound of efficiency. (2) The step-cycle operation scheme. Here, the optimization of power is carried out in the high-temperature limit (the ‘‘classical’’ limit). The results obtained are similar to those of Andresen et al. [Phys. Rev. A 15, 2086 (1977)]. (3) The Curzon–Ahlborn operation scheme. The semigroup approach is used to model the dynamics. Then the power production is optimized. All the results obtained for Newtonian engines operating by the same scheme, such as the Curzon–Ahlborn efficiency, apply in the high-temperature limit. These results are obtained without the additional assumption of proximity to thermal equilibrium, implicitly implied by the use of Newtonian heat conduction in the original derivation. It seems that the results of the Curzon–Ahlborn analysis are always obtained in the high-temperature limit, irrespective of the details of the model. The performance beyond the classical limit is optimized numerically. The classical approximation is found to be valid for most of the spin-polarization range. The deviations from the classical limit depend heavily upon the specific nature of both the working fluid and the heat baths and exhibit great diversity and complexity.
The quantum analog of Carnot cycles in few-particle systems consists of two quantum adiabatic steps and two isothermal steps. This construction is formally justified by use of a minimum work principle. It is then shown, using minimal assumptions of work or heat in nanoscale systems, that the heat-to-work efficiency of such quantum heat engine cycles can be further optimized via two conditions regarding the expectation value of some generalized force operators evaluated at equilibrium states. In general the optimized efficiency is system specific, lower than the Carnot efficiency, and dependent upon both temperatures of the cold and hot reservoirs. Simple computational examples are used to illustrate our theory. The results should be an important guide towards the design of favorable working conditions of a realistic quantum heat engine.
We investigate the finite-time performance of a quantum endoreversible Carnot engine cycle and its inverse operation — Carnot refrigeration cycle, employing a spin-1/2 system as the working substance. The thermal machine is alternatively driven by a hot boson bath of inverse temperature β h and a cold boson bath at inverse temperature β c (>β h). While for the engine model the hot bath is constructed to be squeezed, in the refrigeration cycle the cold bath is established to be squeezed, with squeezing parameter r. We obtain the analytical expressions for both efficiency and power in heat engines and for coefficient of performance and cooling rate in refrigerators. We find that, in the high-temperature limit, the efficiency at maximum power is bounded by the analytical value η + = 1 − sech ( 2 r ) ( 1 − η C ) , and the coefficient of performance at the maximum figure of merit is limited by ε + = sech ( 2 r ) ( 1 + ε C ) sech ( 2 r ) ( 1 + ε C ) − ε C − 1 , where η C = 1 – β h/β c and ε C = β h/(β c – β h) are the respective Carnot values of the engines and refrigerators. These analytical results are identical to those obtained from the Carnot engines based on harmonic systems, indicating that the efficiency at maximum power and coefficient at maximum figure of merit are independent of the working substance.