Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Doping-driven robust superconductivity in tungsten for single-photon detection

Liang Ma, Wei Chen, Hao Wang, Qi Chen, Labao Zhang, Yanqiu Guan, Zhuolin Yang, Wenlei Yin, Rui Yin, Jingrou Tan, Haochen Li, Shuya Guo, Zhang Mengfan, Yue Fei, Huabing Wang, Lin Kang, Peiheng Wu

Published Apr 28, 2025• 5 citations
Publisher

Abstract

Elemental superconductors are widely applied in quantum electronic devices, providing a homogenous research platform for both fundamental science and revolutionary technologies. However, their application in superconducting electronics remains a challenge due to the ultralow operation temperatures and suboptimal stability. Here, we develop a nitrogen-doping strategy to enhance the superconductivity of ultrathin amorphous superconductors for single-photon detection. The interstitial N dopants induce the amorphization of W, resulting in an enhanced superconducting transition temperature of 4.4 K from 0.01 K (α-W). Furthermore, the surface nitroxide passivation layer ensures smooth and homogeneous topography at the wafer scale and provides strong chemical stability for nanodevice fabrication in a 6.0-nm-thick nitrogen-doped amorphous tungsten (NAW) film. Consequently, we achieve NAW-based infrared SNSPDs with saturated quantum efficiency at an operation temperature of >1 K. This doping strategy can be applied to more elemental superconductors and, thus, promote their practical use in electronic devices.

DOI
10.1063/5.0259894

Related papers

Superconducting nanowire single-photon detectors based on amorphous tungsten germanide

Shi‐Jie Yang, Ying Chen, Limin Sun +13 more

In this Letter, we characterized superconducting nanowire single-photon detectors (SNSPDs) based on amorphous tungsten germanide (W0.8Ge0.2) superconducting films, which exhibit superconducting properties comparable to those of amorphous WSi. The nanowire width ranges from 60 to 90 nm, with a fixed filling factor of 30%. All fabricated devices exhibit saturated intrinsic detection efficiency for infrared photons with wavelengths up to 2 μm, indicating that WGe is a promising candidate for SNSPDs designed for mid- and far-infrared photon detection. The timing jitter of these detectors, measured with a room-temperature amplifier, ranges from 127 to 234.5 ps. Further improvements can be achieved through device geometry optimization or the implementation of cryogenic amplifiers.

Applied Physics Letters•Apr 21, 2025•5 citations

Superconducting nanowire single photon detectors based on amorphous superconductors (Conference Presentation)

Boris A. Korzh, Misael Caloz, Jelmer J. Renema +4 more

Superconducting nanowire single photon detectors (SNSPD) made from amorphous superconductors have showed great promise for achieving high fabrication yields, due to the highly uniform nature of the films. We present progress on the development of SNSPD based on amorphous MoSi with a critical temperature of around 5 K, which is ideal for detector operation at temperatures of 1 – 2.5 K, accessible with widely available cryogenic systems. First generation devices have achieved a saturated internal efficiency from visible to near-infrared wavelengths, which is the first requirement for high overall system efficiency. The broadband response has allowed us to make a robust study the energy-current relation in these devices, which defines the current required for a saturated internal detection efficiency for a given incident photon energy. Contrary to previous studies with other material systems, we find a nonlinear energy-current relation, which is an important insight into the detection mechanism in SNSPDs. The latest generation devices have been embedded into an micro-cavity structure in order to increase the system detection efficiency, which has increased to over 65% at 1550 nm. The efficiency is believed to be limited by fabrication imperfections and we present ongoing progress towards improving this characteristic as well as the yield of the devices. Efforts are also being made towards increasing the maximum operating temperature of the devices.

•Jun 9, 2017•0 citations

Fabrication and electrothermal analysis of multilayer NAW superconducting nanowires

Fei Zhou, Liang Ma, Q Chen +7 more

Superconducting nanowire geometry has been widely adopted in single-photon detectors. However, its commonly used planar process limits the improvement of performance and the expansion of functionality. In this study, a three-layer stacked superconducting nanowire detectors and its corresponding fabrication process are proposed and implemented. The superconducting layers are composed of nitrogen-doped amorphous tungsten (NAW), whereas the dielectric layers are made of Nb 5 N 6 . Optimized precise etching control and “overhang” electrode filling were applied to achieve high-precision interlayer interconnection and uniform device fabrication. The experimental results show that the three-layer structure results in a critical current ( I c ) of 7.2 μA, which is approximately three times greater than that of a single-layer structure, along with a 2.7× enhancement in the peak response, a 57% reduction in the pulse width (full width at half maximum), and a 2.2× improvement in the signal-to-noise ratio (SNR). Three distinct saturation plateaus observed in the photon count rate–bias current curve confirm the interlayer thermal coupling mechanism, which is consistent with the derived n-layer thermal model. This work provides a structural paradigm and scalable fabrication process for high-performance superconducting nanowire detector arrays, offering promising prospects for advanced quantum information processing and integrated photonic quantum technologies.

Superconductivity•Jul 4, 2026•0 citations

Superconductor–superconductor bilayers for enhancing single-photon detection

Yachin Ivry, Jonathan J Surick, Maya Barzilay +5 more

Abstract Here, we optimized ultrathin films of granular NbN on SiO 2 and of amorphous α W 5 Si 3 . We showed that hybrid superconducting nanowire single-photon detectors (SNSPDs) made of 2 nm thick α W 5 Si 3 films over 2 nm thick NbN films exhibit advantageous coexistence of timing (<5 ns reset time and 52 ps timing jitter) and efficiency (>96% quantum efficiency) performance. We discuss the governing mechanism of this hybridization via the proximity effect. Our results demonstrate saturated SNSPDs performance at 1550 nm optical wavelength and suggest that such hybridization can significantly expand the range of available superconducting properties, impacting other nano-superconducting technologies. Lastly, this hybridization may be used to tune properties, such as the amorphous character of superconducting films.

arXiv:1703.08034•Nanotechnology•Aug 29, 2017•20 citations

Nitrogen-doped W0.75Re0.25 Superconducting Nanowire Single Photon Detectors

Francesco Colangelo, Abhishek Kumar, H. Wang +4 more

Nitrogen-doped Tungsten-Rhenium superconducting alloys were recently proposed as a promising material platform for superconducting nanowire single-photon detectors (SNSPDs), offering a favorable balance between high normal state resistivity and tunable superconducting properties. In this work, we report on the fabrication and characterization of SNSPDs based on thin W0.75Re0.25 films deposited by reactive DC magnetron sputtering in a mixed Ar/N2 atmosphere. Meander detectors with 70 nm linewidth exhibit saturated internal detection efficiency (IDE) up to 1310 nm and 85.3% IDE at 1550 nm at 2.5 K, with sub-nanosecond rise times, decay times of the order of a few nanoseconds, and timing jitter of 73.2 ps measured with room temperature amplifiers.

arXiv:2605.25597•May 25, 2026•1 citation

Epitaxial superconductor/semiconductor/metal nitride heterostructure for single-photon detection

Shangjr Gwo, Chang-Wei Cheng, Yan-Jyun Liao +4 more

Abstract Superconducting nanowire single-photon detectors (SNSPDs) have become increasingly important for both classical and quantum applications requiring single-photon sensing. Most current SNSPDs based on superconducting niobium nitride (NbN) ultrathin films are fabricated utilizing polycrystalline or amorphous superconductor films, and film inhomogeneity and defectivity can cause significant issues. Here, we present an all-epitaxial approach for fabricating SNSPDs with integrated metal reflectors, semiconductor (dielectric) resonators, and superconductor nanowire detectors. A working example is realized by molecular-beam epitaxy growth of a tri-layered heterostructure, consisting of a titanium nitride (TiN) reflector with ~ 92% reflectivity at the telecommunication wavelength (1550 nm), an aluminum nitride (AlN) resonator with a broad optical transparency window, and a NbN nanowire on c -plane sapphire wafer. The all-epitaxial approach provides a manufacturable platform with superior material properties, as well as uniformity across the wafer, which manifest themselves in tunable material parameters of the superconducting nanowire, including normal-state resistance, superconducting critical temperature, superconducting critical current, and kinetic inductance. The optimized material properties can be utilized to achieve excellent SNSPD performance, including wafer-scale uniformity in device characteristics and broadband (~300 nm) system detection efficiency (>90%) centered at 1550 nm, suitable for large-scale detector arrays and wavelength-division multiplexing (WDM) applications.

Communications Materials•Oct 29, 2026•0 citations
Elemental superconductors are widely applied in quantum electronic devices, providing a homogenous research platform for both fundamental science and revolutionary technologies. However, their application in superconducting electronics remains a challenge due to the ultralow operation temperatures and suboptimal stability. Here, we develop a nitrogen-doping strategy to enhance the superconductivity of ultrathin amorphous superconductors for single-photon detection. The interstitial N dopants induce the amorphization of W, resulting in an enhanced superconducting transition temperature of 4.4 K from 0.01 K (α-W). Furthermore, the surface nitroxide passivation layer ensures smooth and homogeneous topography at the wafer scale and provides strong chemical stability for nanodevice fabrication in a 6.0-nm-thick nitrogen-doped amorphous tungsten (NAW) film. Consequently, we achieve NAW-based infrared SNSPDs with saturated quantum efficiency at an operation temperature of >1 K. This doping strategy can be applied to more elemental superconductors and, thus, promote their practical use in electronic devices.
In this Letter, we characterized superconducting nanowire single-photon detectors (SNSPDs) based on amorphous tungsten germanide (W0.8Ge0.2) superconducting films, which exhibit superconducting properties comparable to those of amorphous WSi. The nanowire width ranges from 60 to 90 nm, with a fixed filling factor of 30%. All fabricated devices exhibit saturated intrinsic detection efficiency for infrared photons with wavelengths up to 2 μm, indicating that WGe is a promising candidate for SNSPDs designed for mid- and far-infrared photon detection. The timing jitter of these detectors, measured with a room-temperature amplifier, ranges from 127 to 234.5 ps. Further improvements can be achieved through device geometry optimization or the implementation of cryogenic amplifiers.
Superconducting nanowire single photon detectors (SNSPD) made from amorphous superconductors have showed great promise for achieving high fabrication yields, due to the highly uniform nature of the films. We present progress on the development of SNSPD based on amorphous MoSi with a critical temperature of around 5 K, which is ideal for detector operation at temperatures of 1 – 2.5 K, accessible with widely available cryogenic systems. First generation devices have achieved a saturated internal efficiency from visible to near-infrared wavelengths, which is the first requirement for high overall system efficiency. The broadband response has allowed us to make a robust study the energy-current relation in these devices, which defines the current required for a saturated internal detection efficiency for a given incident photon energy. Contrary to previous studies with other material systems, we find a nonlinear energy-current relation, which is an important insight into the detection mechanism in SNSPDs. The latest generation devices have been embedded into an micro-cavity structure in order to increase the system detection efficiency, which has increased to over 65% at 1550 nm. The efficiency is believed to be limited by fabrication imperfections and we present ongoing progress towards improving this characteristic as well as the yield of the devices. Efforts are also being made towards increasing the maximum operating temperature of the devices.
Superconducting nanowire geometry has been widely adopted in single-photon detectors. However, its commonly used planar process limits the improvement of performance and the expansion of functionality. In this study, a three-layer stacked superconducting nanowire detectors and its corresponding fabrication process are proposed and implemented. The superconducting layers are composed of nitrogen-doped amorphous tungsten (NAW), whereas the dielectric layers are made of Nb 5 N 6 . Optimized precise etching control and “overhang” electrode filling were applied to achieve high-precision interlayer interconnection and uniform device fabrication. The experimental results show that the three-layer structure results in a critical current ( I c ) of 7.2 μA, which is approximately three times greater than that of a single-layer structure, along with a 2.7× enhancement in the peak response, a 57% reduction in the pulse width (full width at half maximum), and a 2.2× improvement in the signal-to-noise ratio (SNR). Three distinct saturation plateaus observed in the photon count rate–bias current curve confirm the interlayer thermal coupling mechanism, which is consistent with the derived n-layer thermal model. This work provides a structural paradigm and scalable fabrication process for high-performance superconducting nanowire detector arrays, offering promising prospects for advanced quantum information processing and integrated photonic quantum technologies.
Abstract Here, we optimized ultrathin films of granular NbN on SiO 2 and of amorphous α W 5 Si 3 . We showed that hybrid superconducting nanowire single-photon detectors (SNSPDs) made of 2 nm thick α W 5 Si 3 films over 2 nm thick NbN films exhibit advantageous coexistence of timing (<5 ns reset time and 52 ps timing jitter) and efficiency (>96% quantum efficiency) performance. We discuss the governing mechanism of this hybridization via the proximity effect. Our results demonstrate saturated SNSPDs performance at 1550 nm optical wavelength and suggest that such hybridization can significantly expand the range of available superconducting properties, impacting other nano-superconducting technologies. Lastly, this hybridization may be used to tune properties, such as the amorphous character of superconducting films.
Nitrogen-doped Tungsten-Rhenium superconducting alloys were recently proposed as a promising material platform for superconducting nanowire single-photon detectors (SNSPDs), offering a favorable balance between high normal state resistivity and tunable superconducting properties. In this work, we report on the fabrication and characterization of SNSPDs based on thin W0.75Re0.25 films deposited by reactive DC magnetron sputtering in a mixed Ar/N2 atmosphere. Meander detectors with 70 nm linewidth exhibit saturated internal detection efficiency (IDE) up to 1310 nm and 85.3% IDE at 1550 nm at 2.5 K, with sub-nanosecond rise times, decay times of the order of a few nanoseconds, and timing jitter of 73.2 ps measured with room temperature amplifiers.
Abstract Superconducting nanowire single-photon detectors (SNSPDs) have become increasingly important for both classical and quantum applications requiring single-photon sensing. Most current SNSPDs based on superconducting niobium nitride (NbN) ultrathin films are fabricated utilizing polycrystalline or amorphous superconductor films, and film inhomogeneity and defectivity can cause significant issues. Here, we present an all-epitaxial approach for fabricating SNSPDs with integrated metal reflectors, semiconductor (dielectric) resonators, and superconductor nanowire detectors. A working example is realized by molecular-beam epitaxy growth of a tri-layered heterostructure, consisting of a titanium nitride (TiN) reflector with ~ 92% reflectivity at the telecommunication wavelength (1550 nm), an aluminum nitride (AlN) resonator with a broad optical transparency window, and a NbN nanowire on c -plane sapphire wafer. The all-epitaxial approach provides a manufacturable platform with superior material properties, as well as uniformity across the wafer, which manifest themselves in tunable material parameters of the superconducting nanowire, including normal-state resistance, superconducting critical temperature, superconducting critical current, and kinetic inductance. The optimized material properties can be utilized to achieve excellent SNSPD performance, including wafer-scale uniformity in device characteristics and broadband (~300 nm) system detection efficiency (>90%) centered at 1550 nm, suitable for large-scale detector arrays and wavelength-division multiplexing (WDM) applications.