Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Communications Letters

Multi-Bit Successive Cancellation List Decoding of Polar Codes Using One-Bit Error Boundary

In‐Cheol Park, Seungju Woo, Jaeyoung Lee, Minha Park, Sangbeom Park

Published Apr 16, 2025• 2 citations
Publisher

Abstract

This letter proposes an efficient method to reduce path splits in the successive cancellation list (SCL) decoding. We construct the boundary consisting of single-bit and multi-bit nodes that have a low error probability within the SC-decoding tree. The nodes on the boundary are considered with only two candidates per path instead of descending to their child nodes. To establish the boundary, we investigate the error probability of multi-bit nodes in the SC-decoding tree. The proposed method reduces the overall decoding cycles by approximately 70% while maintaining almost the same error-correcting performance as the conventional SCL decoding method.

DOI
10.1109/lcomm.2025.3561246

Related papers

In Situ Multi-Bit Decision for Successive Cancellation List Decoding of Polar Codes

Jaehyeon Park, Jaeyoung Lee, In‐Cheol Park

Polar codes are the first capacity-achieving error-correction code which has attracted much research attention. Among many decoding methods, successive cancellation list decoding (SCLD) is considered as a representative decoding method that can achieve a good error-correcting performance. However, the long latency of SCLD is a significant matter that hinders practical applications, which is mainly caused by two features of the SCLD process: tree traversal and path-splitting. To alleviate the main reasons, a new multi-bit SCLD algorithm is proposed in this paper to decode several bits simultaneously without conducting any tree traversal and path-splitting when a node in the decoding tree holds a specific condition. In addition, a path ignoring (PI) technique is proposed to mitigate the condition of the multi-bit SCLD, which results in an additional reduction of latency. The proposed multi-bit decoding method and the PI technique play a significant role in reducing the number of path-splitting cases, by 96% compared to the conventional SCLD method. Simulation results show that compared to the conventional SCLD with list sizes 8 and 16, the proposed multi-bit decoding associated with the PI technique reduces the overall decoding cycles by 77% and 79%, respectively, with almost no degradation of error-correcting performance.

IEEE Access•Jan 1, 2022•5 citations

Low-Complexity Successive Cancellation List Decoding of Polar Codes Based on Path Metric

Xiaodong Liu, Ce Sun, Wei Tang

Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.

IEEE International Conference on Communication Technology (ICCT)•Oct 13, 2021•3 citations

A Split-Reduced Successive Cancellation List Decoder for Polar Codes

Zhaoyang Zhang, Liang Zhang, Xianbin Wang +2 more

This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.

arXiv:1511.02150•IEEE Journal on Selected Areas in Communications•Nov 30, 2015•77 citations

Simplified multi-bit SC list decoding for polar codes

Jiangxue Han, Rongke Liu, Runxin Wang

In this paper, we propose a simplified multi-bit successive cancellation list (SMSCL) decoding method for polar codes. In the proposed SMSCL decoding, frozen bits are ignored, and multiple information bits are intermediately decoded at each decision step. In addition, a modified two-stage pruning network is proposed to reduce the complexity of path pruning in SMSCL decoding. Compared to the existing multi-bit SCL decoders, the SMSCL decoder can achieve significant latency and complexity reduction over a wide range of code rates.

IEEE International Conference on Acoustics Speech and Signal Processing•Mar 1, 2016•5 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

IEEE Wireless Communications and Networking Conference Workshops (WCNCW)•Mar 1, 2017•89 citations

List Decoding of Polar Codes

Mohammad Rowshan, Emanuele Viterbo

To address the weaknesses of successive cancellation (SC) decoding, this chapter explores enhanced algorithms that follow multiple paths in the decoding tree. These decoders, known as successive cancelation list (SCL) decoders, retain the recursive structure of SC decoding while improving its performance by considering several distinct solutions. The chapter delves into both parallel and serial implementations of SCL decoders, highlighting their fundamental structures and trade-offs. It helps the readers to gain an understanding of the fundamental principles behind SC list decoders and learn how to exploit the structural properties of polar codes to enhance decoding efficiency. The SCL decoding algorithm scans the binary tree (in the case of binary codes) by following more than one path at a time. That is, a number of paths are followed in parallel. The chapter review different strategies for additional decoding attempts in an iterative manner for the SC and SCL decoding algorithms.

Wiley eBooks•Oct 27, 2025•1 citation
This letter proposes an efficient method to reduce path splits in the successive cancellation list (SCL) decoding. We construct the boundary consisting of single-bit and multi-bit nodes that have a low error probability within the SC-decoding tree. The nodes on the boundary are considered with only two candidates per path instead of descending to their child nodes. To establish the boundary, we investigate the error probability of multi-bit nodes in the SC-decoding tree. The proposed method reduces the overall decoding cycles by approximately 70% while maintaining almost the same error-correcting performance as the conventional SCL decoding method.
Polar codes are the first capacity-achieving error-correction code which has attracted much research attention. Among many decoding methods, successive cancellation list decoding (SCLD) is considered as a representative decoding method that can achieve a good error-correcting performance. However, the long latency of SCLD is a significant matter that hinders practical applications, which is mainly caused by two features of the SCLD process: tree traversal and path-splitting. To alleviate the main reasons, a new multi-bit SCLD algorithm is proposed in this paper to decode several bits simultaneously without conducting any tree traversal and path-splitting when a node in the decoding tree holds a specific condition. In addition, a path ignoring (PI) technique is proposed to mitigate the condition of the multi-bit SCLD, which results in an additional reduction of latency. The proposed multi-bit decoding method and the PI technique play a significant role in reducing the number of path-splitting cases, by 96% compared to the conventional SCLD method. Simulation results show that compared to the conventional SCLD with list sizes 8 and 16, the proposed multi-bit decoding associated with the PI technique reduces the overall decoding cycles by 77% and 79%, respectively, with almost no degradation of error-correcting performance.
Successive cancellation (SC) decoding algorithm and successive cancellation list (SCL) decoding algorithm are two common decoding methods for polar codes. The SC decoding algorithm has low complexity, but in its decoding process, the bits with small channel indices are used to assist the decoding of the bits with large channel indices. Therefore, the bit being decoded depends on the bits that have already been decoded which causes error propagation. On the basis of SC decoding, the SCL decoding algorithm overcomes the problem of error propagation by widening the path search width and retaining multiple paths at the same time in the decoding process. However, the complexity of SCL decoding is higher than that of SC decoding. Without changing the performance of the SCL decoding algorithm, we propose a low-complexity SCL decoding algorithm based on path metric (PM). After the last frozen bit is decoded, the path with the smallest PM is selected, and the subsequent nodes adopt SC decoding. Through this combination of SCL decoding and SC decoding, the complexity of the SCL decoding algorithm can be effectively reduced while the SCL decoding performance remains unchanged, especially in the case of high code rates.
This paper focuses on low complexity successive cancellation list (SCL) decoding of polar codes. In particular, using the fact that splitting may be unnecessary when the reliability of decoding the unfrozen bit is sufficiently high, a novel splitting rule is proposed. Based on this rule, it is conjectured that, if the correct path survives at some stage, it tends to survive till termination without splitting with high probability. On the other hand, the incorrect paths are more likely to split at the following stages. Motivated by these observations, a simple counter that counts the successive number of stages without splitting is introduced for each decoding path to facilitate the identification of correct and incorrect paths. Specifically, any path with counter value larger than a predefined threshold ω is deemed to be the correct path, which will survive at the decoding stage, while other paths with counter value smaller than the threshold will be pruned, thereby reducing the decoding complexity. Furthermore, it is proved that there exists a unique unfrozen bit uN-K1+1, after which the successive cancellation decoder achieves the same error performance as the maximum likelihood decoder if all the prior unfrozen bits are correctly decoded, which enables further complexity reduction. Simulation results demonstrate that the proposed low complexity SCL decoder attains performance similar to that of the conventional SCL decoder, while achieving substantial complexity reduction.
In this paper, we propose a simplified multi-bit successive cancellation list (SMSCL) decoding method for polar codes. In the proposed SMSCL decoding, frozen bits are ignored, and multiple information bits are intermediately decoded at each decision step. In addition, a modified two-stage pruning network is proposed to reduce the complexity of path pruning in SMSCL decoding. Compared to the existing multi-bit SCL decoders, the SMSCL decoder can achieve significant latency and complexity reduction over a wide range of code rates.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
To address the weaknesses of successive cancellation (SC) decoding, this chapter explores enhanced algorithms that follow multiple paths in the decoding tree. These decoders, known as successive cancelation list (SCL) decoders, retain the recursive structure of SC decoding while improving its performance by considering several distinct solutions. The chapter delves into both parallel and serial implementations of SCL decoders, highlighting their fundamental structures and trade-offs. It helps the readers to gain an understanding of the fundamental principles behind SC list decoders and learn how to exploit the structural properties of polar codes to enhance decoding efficiency. The SCL decoding algorithm scans the binary tree (in the case of binary codes) by following more than one path at a time. That is, a number of paths are followed in parallel. The chapter review different strategies for additional decoding attempts in an iterative manner for the SC and SCL decoding algorithms.