One of the predominant causes of program distortion in the real quantum computing system may be attributed to the probability deviation caused by thermal relaxation. We introduce Barber (Balancing reAdout Results using Bit-invErted ciRcuits), a method designed to counteract the asymmetric thermal relaxation deviation and improve the reliability of near-term quantum programs. Barber collaborates with a bit-inverted quantum circuit, where the excited quantum state of qubits is assigned to the |0〉 and the unexcited state to the |1〉. In doing so, bit-inverted quantum circuits can experience thermal relaxation in the opposite direction compared to standard quantum circuits. Barber can effectively suppress the thermal relaxation deviation in program's readout results by selectively merging distributions from the standard and bit-inverted circuits.
One of the predominant causes of program distortion in the real quantum computing system may be attributed to the probability deviation caused by thermal relaxation. We introduce Barber (Balancing reAdout Results using Bit-invErted ciRcuits), a method designed to counteract the asymmetric thermal relaxation deviation and improve the reliability of near-term quantum programs. Barber collaborates with a bit-inverted quantum circuit, where the excited quantum state of qubits is assigned to the |0〉 and the unexcited state to the |1〉. In doing so, bit-inverted quantum circuits can experience thermal relaxation in the opposite direction compared to standard quantum circuits. Barber can effectively suppress the thermal relaxation deviation in program's readout results by selectively merging distributions from the standard and bit-inverted circuits.
Readout errors on near-term quantum computers can introduce significant error to the empirical probability distribution sampled from the output of a quantum circuit. These errors can be mitigated by classical postprocessing given the access of an experimental response matrix that describes the error associated with the measurement of each computational basis state. However, the resources required to characterize a complete response matrix and to compute the corrected probability distribution scale exponentially with the number of qubits, n. In this work, we modify standard matrix inversion techniques using perturbative approximations with significantly reduced complexity and bounded error when the likelihood of high-order bit-flip events is strongly suppressed. Given a characteristic error rate q, we discuss a method to recover the probability of the all-zeros bit string p0 by sampling only a small subspace of the response matrix before inverting readout error, resulting in a relative speedup of poly[2n/(nw)], which we motivate using a simplified error model for which the approximation incurs only O(qw) error for some integer w. We then provide a generalized technique to efficiently recover full output distributions with O(qw) error in the perturbative limit. These approximate techniques for readout-error correction may greatly accelerate near-term quantum computing applications.
Readout errors are a significant source of noise for near-term intermediate-scale quantum computers. Mismeasuring a qubit as $|1\ensuremath{\rangle}$ when it should be $|0\ensuremath{\rangle}$ occurs much less often than mismeasuring a qubit as $|0\ensuremath{\rangle}$ when it should have been $|1\ensuremath{\rangle}$. We make the simple observation that one can improve the readout fidelity of quantum computers by applying targeted X gates prior to performing a measurement. These X gates are placed so that the expected number of qubits in the $|1\ensuremath{\rangle}$ state is minimized. Classical postprocessing can undo the effect of the X gates so that the expectation value of any observable is unchanged. This protocol is designed to have no effect when readout errors are symmetric. We show that the statistical uncertainty following readout error corrections is smaller when using readout rebalancing. The statistical advantage is circuit and computer dependent and is demonstrated for the W state, a Grover search, and for a Gaussian state. The benefit in statistical precision is most pronounced (and nearly a factor of 2 in some cases) when states with many qubits in the excited state have high probability.
Noisy Intermediate-Scale Quantum (NISQ) computers suffer from gate errors, decoherence, and readout noise that can severely impact even small quantum circuits. In this work, the application of error mitigation techniques was investigated to a simple two-bit quantum comparator circuit executed on real IBM Quantum hardware. The 2-bit comparator is a basic quantum logic circuit that compares two 2-qubit binary numbers and outputs whether the first number is greater than, equal to, or less than the second. This comparator was implemented using Qiskit and studied its performance under realistic noise. This study on error mitigation concentrates on dynamical decoupling (DD), which is a coherent error suppression strategy that cancels coherent errors by inserting echo pulse sequences during idle time periods. The results demonstrate that dynamical decoupling improves accuracy for the comparator circuit - accurate outcomes are closer to the ideal outcome in the absence of noise. These results show that dynamical decoupling yields notable accuracy improvements for the comparator circuit - bringing measured outcomes closer to the ideal noiseless results. A performance analysis (including a bar-chart of accuracy after mitigation vs. before mitigation simulation) is presented to quantify these improvements. Finally, the implications of applying error mitigation in small quantum circuits and its relevance for near-term quantum computing are also discussed, where such techniques can enhance the reliability of quantum computations in the absence of full quantum error correction.
Quantum computing promises to address problems in simulation, optimization, and chemistry, but current hardware operates in the noisy intermediate-scale (NISQ) regime where coherence limits, gate imperfections, and readout errors restrict performance. Improving calibration and mitigating errors therefore remain essential. This thesis analyzes error reduction on superconducting transmon qubits through calibration, gate analysis, and circuit-level mitigation. It compares single-qubit amplitude calibration methods and analyzes two-qubit gates based on the cross-resonance interaction, identifying differences in precision, convergence, and performance. In addition, it develops Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE) which measures effective error strength using inverted circuits. Compared to standard ZNE, IC-ZNE achieves results closer to ideal values and reduces observable errors. Overall, the presented methods improve the reliability of near-term quantum processors.
Quantum computing promises exponential speedups for an important class of problems.While quantum computers with few dozens of qubits have been demonstrated, these machines suffer from a high rate of gate errors.Such machines are operated in the Noisy Intermediate Scale Quantum (NISQ) mode of computing where the output of the machine can be erroneous.In this talk, I will discuss some of our recent work that aims to improve the reliability of NISQ computers by developing software techniques to mitigate hardware errors.Our first work exploits the variability in the error rates of qubits to steer more operations towards qubits with lower error rates and avoid qubits that are error-prone.Our second work looks at executing different versions of the programs each crafted to cause diverse mistakes so that the machine becomes less vulnerable to correlated errors.Our third work looks at exploiting the state-dependent bias in measurement errors (state 1 is more error-prone than state 0) and dynamically flips the state of the qubit to perform the measurement in the stronger state.We perform our evaluations on real quantum machines from IBM and demonstrate significant improvement in the overall system reliability.Finally, I will also briefly discuss the hardware aspect of designing largescale quantum computers, including cryogenic processor and cryogenic memory system.
Quantum circuit ensembles that have the properties of unitary k-designs represent applications where there is no obvious bias toward any particular Pauli support, as is the case in simulating systems exhibiting ''quantum chaos,'' which range from quantum dynamics near black holes to gapless spin fluid analysis. However, noisy hardware makes quantum circuits prone to a myriad of error sources, of which depolarizing and coherent error can be particularly destructive. To combat depolarizing error, popular techniques typically involve circuit or gate folding, which can be time-intensive procedures due to increased circuit depth and shot overhead. Other tensor-network-based mitigation techniques suffer from intractability in high-entanglement regimes. In this work, we leverage the structure of unitary k-design Pauli support distributions by introducing a technique we name ''circuit balancing,'' along with gate benchmarking data, in order to estimate circuit-wide depolarization. We describe how to invert the diagnosed circuit depolarization even in the presence of coherent error, via Pauli twirling. We provide asymptotics to estimate the number of twirls needed to maintain a desired output fidelity. We test our method numerically in a variety of simulation settings and find that it can significantly reduce average random circuit infidelity. Further, we employ our methods to find significant infidelity reductions when running a random circuit ensemble on a contemporary superconducting quantum computer, IBM Fez. Overall, we show that the method effectively reduces gate-based error for unitary k-designs without incurring any two-qubit gate overhead.