Abstract The establishment of secure global communication links is fundamentally dependent on the support of airborne platforms. However, the transmission of quantum signals from these platforms faces significant challenges related to boundary layer (BL) effects. This article presents an improved channel loss calculation model that effectively incorporates these BL effects in airborne environment. The model takes into account detailed variations in beam width, scintillation index, and transmission efficiency within the airborne environment. The results indicate that BL effects have an impact on the beam width and scintillation index, highlighting the need to maximize the receiver aperture within payload capacity constraints. In addition, the analysis shows that the supersonic BL results in greater losses and higher error rates compared to the transonic BL. Furthermore, atmospheric turbulence is identified as the primary factor that reduces transmission efficiency when transmitting over long distances in the airborne environment.
Abstract The establishment of secure global communication links is fundamentally dependent on the support of airborne platforms. However, the transmission of quantum signals from these platforms faces significant challenges related to boundary layer (BL) effects. This article presents an improved channel loss calculation model that effectively incorporates these BL effects in airborne environment. The model takes into account detailed variations in beam width, scintillation index, and transmission efficiency within the airborne environment. The results indicate that BL effects have an impact on the beam width and scintillation index, highlighting the need to maximize the receiver aperture within payload capacity constraints. In addition, the analysis shows that the supersonic BL results in greater losses and higher error rates compared to the transonic BL. Furthermore, atmospheric turbulence is identified as the primary factor that reduces transmission efficiency when transmitting over long distances in the airborne environment.
Airborne quantum key distribution (QKD) that can synergize with terrestrial networks and quantum satellite nodes is expected to provide flexible and relay links for the large-scale integrated communication network. However, the photon transmission rate would be randomly reduced, owing to the random distributed boundary layer that surrounding to the surface of the aircraft when the flight speed larger than Mach 0.3. Here, we investigate the airborne QKD performance with the BL effects. Furthermore, we take experimental data of supersonic BL into the model and compare the airborne QKD performance under different conditions. Simulation results show that, owing to the complex small-scale turbulence structures in the supersonic boundary layer, the deflection angle and correspondingly drifted offset of the beam varied obviously and randomly, and the distribution probability of photons are redistributed. And the subsonic and supersonic boundary layer would decrease ~35.8% and ~62.5% of the secure key rate respectively. Our work provides a theoretical guidance towards a possible realization of high-speed airborne QKD.
Airborne platforms offer a potential solution to overcome the challenges of quantum key distribution (QKD) over long distances and in free space. However, the presence of boundary layer around high-speed flying vehicles can introduce unpredictable shifts and disturbances to transmitted photons, affecting their mode. In this article, we propose a performance evaluation scheme for air-to-air QKD with boundary layer effects. Our analysis compares the effects of the boundary layer at the receiver and at the transmitter on QKD performance, as well as an evaluation of two possible air-to-air QKD models. The results indicate that in the co-directional flight model, a particular azimuth can significantly increase the QBER when both ends are affected by the boundary layer, and photon deflection angles are larger when the transmitter is at a relatively low altitude.In the counter-directional flight model, the boundary layer around the aircraft may result in a maximum reduction in secure key rate by approximately 79.6% and introduce average channel loss of around 3.45 dB for transmitted photons. These findings highlight the importance of considering the boundary layer effects in air-to-air QKD and provide insights for the design and optimization of QKD systems in practical scenarios.
With the substantial progress of terrestrial fiber-based quantum networks and satellite-based quantum nodes, airborne quantum key distribution (QKD) is now becoming a flexible bond between terrestrial fiber and satellite, which is an efficient solution to establish a mobile, on-demand and real-time coverage quantum network. However, the boundary layer (BL) normally adhere to the surface of the aircraft when its speed is higher than Mach 0.3. The BL would change local refractive index and energy flux density drastically, thus lowering the coupling efficiency and infidelity of quantum states. Here, we investigate the airborne QKD performance with the BL effects, which has been rarely mentioned in existing research. Through simulations and modeling, we present the relation between divergence angle and secure key rate. With the increase of flight speed v, relative flight altitude h and the shortest projection distance d, the key-rate curve is obviously jitter, and the QKD performance is continuously reduced. Simulation results show that, under several typical circumstances, the BL will affect the communicating distance, the transmission efficiency and the generation of secure key rate in varying degrees, which is helpful for future airborne experimental designs.
Remarkable progress has been made in satellite-based quantum key distribution (QKD), which can effectively provide QKD service even at the intercontinental scale and construct an ultralong-distance global quantum network.But there are still some places where terrestrial fiber and ground stations cannot be constructed, like harsh mountainous areas and air space above the sea.So the airborne platform is expected to replace the ground station and provide flexible and relay links for the large-scale integrated communication network.However, the photon transmission rate would be randomly reduced, owing to the randomly distributed boundary layer that surrounds the surface of the aircraft when the flight speed is larger than 0.3 Ma.Previous research of airborne QKD with boundary layer effects is mainly under the air-to-ground scenario in which the aircraft is a transmitter, while the satellite-to-aircraft scenario is rarely reported.In this article, we propose a performance evaluation scheme of satellite-to-aircraft QKD with boundary layer effects in which the aircraft is the receiver.With common experimental settings, the boundary layer would introduce a ∼31 dB loss to the transmitted photons, decrease ∼47% of the quantum communication time, and decrease ∼51% of the secure key rate, which shows that the aero-optical effects caused by the boundary layer cannot be ignored.Our study can be performed in future airborne quantum communication designs.
This paper presents a performance evaluation of BB84 and SARG04 quantum key distribution (QKD) proto-cols in high-speed air-to-air communication scenarios using co-directional and anti-directional flight models. By integrating both classical and quantum models with QuTiP for simulating quantum states and noise channels, we analyze secure key rates and quantum bit error rates (QBER) under varying Mach numbers, azimuth angles, and boundary layer effects. Our results indicate that co-directional flights experience lower QBER and higher transmission efficiency compared to anti-directional flights due to reduced turbulence intensity. However, boundary layer-induced turbulence and Mach number variations significantly degrade the effective key rate in both models. The proposed evaluation scheme, leveraging QuTiP's quantum modeling capabilities, provides a comprehensive framework for optimizing airborne QKD systems for secure communication in dynamic flight conditions. Furthermore, the insights gained from this work can be extended to satellite-based communication networks, where similar dynamic conditions-such as relative motion, atmospheric disturbances, and line-of-sight sta-bility-pose significant challenges for secure quantum commu-nication.
Abstract With the substantial progress of terrestrial fiber-based quantum networks and satellite-based quantum nodes, airborne quantum key distribution (QKD) is now becoming a flexible bond between terrestrial fiber and satellite, which is an efficient solution to establish a mobile, on-demand, and real-time coverage quantum network. However, the random distributed boundary layer is always surrounded to the surface of the aircraft when the flight speed larger than 0.3 Ma, which would introduce random wavefront aberration, jitter and extra intensity attenuation to the transmitted photons. In this article, we propose a performance evaluation scheme of airborne QKD with boundary layer effects. The analyzed results about the photon deflection angle and wavefront aberration effects, show that the aero-optical effects caused by the boundary layer can not be ignored, which would heavily decrease the final secure key rate. In our proposed airborne QKD scenario, the boundary layer would introduce ∼3.5 dB loss to the transmitted photons and decrease ∼70.9% of the secure key rate. With tolerated quantum bit error rate set to 8%, the suggested quantum communication azimuth angle between the aircraft and the ground station is within 55∘. Furthermore, the optimal beacon laser module and adaptive optics module are suggested to be employed, to improve the performance of airborne QKD system. Our detailed airborne QKD performance evaluation study can be performed to the future airborne quantum communication designs.