Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

A novel laser intensity stabilization and modulation method based on utilization of Zeeman–Faraday effect in atomic vapor cells

Mahmud Karami, M. Hatefi, Z. Gholami Ahangaran, Zahra Heydarinasab, D. Samadi, H. Sharifi Tameh, Ayesha Tasnim, Farrokh Sarreshtedari

Published Mar 1, 2025• 0 citations
Publisher

Abstract

Utilizing the Zeeman Faraday effect in atomic vapor cells, a novel setup is introduced both for laser intensity stabilization and laser intensity modulation. The method is based on the closed loop control of the polarization rotation angle of the laser light in an atomic vapor cell for adjustment of the laser intensity. Characterizing the implemented setup, it is shown that more than 30 dB attenuation of the optical fluctuation is achieved in the frequency range from DC to 1 kHz. Meanwhile, the laser intensity could be efficiently locked to a modulating voltage signal, which results in amplitude modulation of the laser beam. We believe that this simple method could be effectively used in different atomic physics experiments, including the stabilization of the laser intensity in applications where near resonance frequency sweeping is required or applications that contain optical modulation of lasers in lock-in detection schemes.

DOI
10.1063/5.0232227

Related papers

Off-resonance laser frequency stabilization method by Faraday rotation spectroscopy using acoustic-optic modulator

Zishan Fang, Wei Quan, Yueyang Zhai

We propose a far off-resonance laser frequency stabilization method that can accurately adjust the frequency lock points based on the Faraday rotation spectroscopy. The atomic magnetometer based on the spin-exchange relaxation-free (SERF) theory needs to stabilize the frequency of the probe laser on the detuning of several gigahertz (GHz) away from the resonance of the alkali metal atom, to reduce the absorption of the probe light by the alkali metal vapor cell. We propose a laser frequency stabilization method that can accurately adjust the frequency lock points using an acousto-optic modulator based on Faraday rotation spectroscopy. We reveal the principles of the method and simulate the new Faraday rotation spectra. Besides, we study the effect of the amount of frequency shift of the acousto - optic modulator and the temperature of the alkali metal vapor cell on the frequency lock points of the spectra, and give the formula for calculating the frequency point. Our proposed laser frequency stabilization method can stabilize the laser frequency on the detuning of several gigahertz (GHz) away from the resonance of the alkali metal atom and can adjust the frequency lock points quickly and accurately. This method can be used in atomic magnetometer, degenerate Raman sideband cooling (DRSC) and two photon excitation of Rydberg states.

•Oct 24, 2017•1 citation

A frequency stabilization method for diode lasers utilizing low-field Faraday polarimetry

Joseph Kerckhoff, Colin Bruzewicz, R. Uhl +1 more

We present a method of diode laser frequency stabilization based on the Faraday rotation of linearly polarized light passing through an atomic sample in the presence of a very modest (1mT) magnetic field. Near the zero crossing of this spectroscopic feature, an optical system capable of very precise polarimetry detects and corrects for very small frequency fluctuations via a feedback system, which keeps the rotation signal at zero. In our application, we have demonstrated robust frequency stabilization over time scales from 10ms to 1h at the 1MHz level or below. We utilize this technique to lock our laser to a “forbidden” M1∕E2 transition in thallium at 1283nm, for which saturated absorption techniques are not straightforward. This technique has broad applicability to spectroscopy of various atomic systems as we also demonstrate using a Rb cell and a 780nm diode laser.

Review of Scientific Instruments•Sep 1, 2005•16 citations

Atomic-vapor laser interaction

Priscila Mayana Torres Barboza

In this work we investigate the transmission in an optical cell containing an atomic vapor, when a laser is tuned to the wings of the Doppler line, presenting inhomogeneous broadening. The experiment is designed to detect the transmission of a laser beam through a an atomic cesium vapor within a quartz cell. Due to the high atomic density in the 1 mm cell, the laser beam is totally absorbed at resonance. On the other hand, when the detuning by few GHz from the center of the line an oscillatory signal is observed as a function of the laser frequency. The amplitude of the transmission signal varies linearly with the laser intensity. These oscillations exhibit diferent behavior as we change some parameters of the system, and the rate of the oscillations vary with laser detuning and on the atomic density. The phase of the transmited field is also sensitive to the angle of incidence of the laser beam in the cell, which allows to vary the lineshape of the signal without changing the parameters of the laser (intensity, frequency, ...) or atomic vapor. Out of resonance with the atomic vapor, the parallel windows of commercial optical cell cavity works as a low finesse Fabry-Pérot with a free spectral range of 150 GHz. However, in resonance, the optical path of the cavity changes varies with frequency due to the dispersive response of the atomic vapor. This study experimentally characterized the transmission signal through a cavity containing resonant vapor as a function of intensity and frequency of the laser, as well as its dependence on the angle of incidence of the beam. A numerical model that allows to determine the collisional broadening of the atomic vapor adjusting the spectral curves of the transmission signal was developed. As an application, exploring the oscillations in the wings of the resonance, we can lock the laser frequency at a few GHz off the center of the atomic resonance. The lock was performed in the frequency range between 0,8 GHz and 2,4 GHz from the center of the D2 line of cesium. To characterize the locking stability we measure the optical beat signal between two similar experiments, using the same locking technique.

•Jul 28, 2014•0 citations

Exploring the Zeeman effect in spectroscopy for laser frequency manipulation in optical systems

Nuttanan Tanasanchai, Phatwarach Siriworakoonchai, Parinya Udommai +1 more

Abstract In optical systems, acousto-optic modulators (AOMs) and electro-optic modulators (EOMs) are commonly utilized for laser frequency manipulation. However, these devices come with drawbacks such as high cost and the requirement of optical adjustments to change the frequency shift direction. In this study, we propose an alternative method that harnesses the Zeeman effect in the saturated-absorption spectroscopy to shift the energy levels in atom. With this technique, the laser frequency can be shifted without the need for AOMs or EOMs. The stability of laser locking was investigated for any case of polarization of probe and pump beam. We found when the polarization of the probe and pump beams is linear and perpendicular, it results in the highest level of stability in laser locking compared to other polarization configurations.

Journal of Physics Conference Series•Dec 1, 2023•0 citations

Pulsed vapor cell atomic clock with a differential Faraday rotation angle detection

Kemu Wang, Zhijing Du, Yanyan Liu +5 more

Laser intensity noise is one of the main limiting factors in pulsed vapor cell clocks. To reduce the contribution of the laser intensity noise to detection signal in the pulsed optically pumped atomic clock, a scheme based on the differential Faraday rotation angle is proposed. Theoretically, the Ramsey fringes, the sensitivity of clock frequency to laser intensity fluctuation and the signal to noise ratio for absorption, differential, and Faraday rotation angle methods are calculated and compared. Using a Wollaston prism rotated 45°relative to the incident polarization, and two photodetectors, Ramsey fringes of three detection methods are obtained simultaneously. In the proposed scheme, the long-term Faraday rotation angle fluctuation is 0.66% at 30000s, which is much smaller than fluctuation of traditional absorption signal 3.9% at 30000s. And the contribution of laser intensity noise to clock instability is also reduced. Using optimized photodetector with high common mode rejection ratio, a better performance should be expected. This proposed scheme is attractive for the development of high performance vapor clock based on pulsed optically pumped.

Optics Express•Oct 28, 2021•5 citations

Frequency stabilization method for transition to a Rydberg state using Zeeman modulation

Feng-Dong Jia, Jian Zhang, Lei Zhang +5 more

We herein develop and demonstrate a stable frequency-locking scheme for Rydberg atomic experiments. We use the Zeeman effect to modulate the three-level ladder-type Rydberg electromagnetically induced transparency (EIT) signal to lock the laser frequency of the coupling light for transition from its intermediate state to a Rydberg state. The effects of polarization of the probe and coupling lights, and the amplitude of the AC modulated magnetic field B 0 on the EIT and the corresponding dispersive error signal, are both analyzed. The results show that both the EIT signal and dispersive error signal are the strongest when the polarizations of coupling and probe fields are circular and equal. The signal-to-noise ratio of the dispersive error signal increases with B 0 . The slope of the dispersive error signal increases first and then decreases with B 0 , which is related to the increase of the EIT linewidth caused by the higher B 0 . The linewidth of the laser is significantly less than 500 kHz after frequency locking, which satisfies the requirements of most experiments involving Rydberg atoms. The method proposed herein can generally be applied to any cascade system of Rydberg atoms.

Applied Optics•Jan 30, 2020•34 citations
Utilizing the Zeeman Faraday effect in atomic vapor cells, a novel setup is introduced both for laser intensity stabilization and laser intensity modulation. The method is based on the closed loop control of the polarization rotation angle of the laser light in an atomic vapor cell for adjustment of the laser intensity. Characterizing the implemented setup, it is shown that more than 30 dB attenuation of the optical fluctuation is achieved in the frequency range from DC to 1 kHz. Meanwhile, the laser intensity could be efficiently locked to a modulating voltage signal, which results in amplitude modulation of the laser beam. We believe that this simple method could be effectively used in different atomic physics experiments, including the stabilization of the laser intensity in applications where near resonance frequency sweeping is required or applications that contain optical modulation of lasers in lock-in detection schemes.
We propose a far off-resonance laser frequency stabilization method that can accurately adjust the frequency lock points based on the Faraday rotation spectroscopy. The atomic magnetometer based on the spin-exchange relaxation-free (SERF) theory needs to stabilize the frequency of the probe laser on the detuning of several gigahertz (GHz) away from the resonance of the alkali metal atom, to reduce the absorption of the probe light by the alkali metal vapor cell. We propose a laser frequency stabilization method that can accurately adjust the frequency lock points using an acousto-optic modulator based on Faraday rotation spectroscopy. We reveal the principles of the method and simulate the new Faraday rotation spectra. Besides, we study the effect of the amount of frequency shift of the acousto - optic modulator and the temperature of the alkali metal vapor cell on the frequency lock points of the spectra, and give the formula for calculating the frequency point. Our proposed laser frequency stabilization method can stabilize the laser frequency on the detuning of several gigahertz (GHz) away from the resonance of the alkali metal atom and can adjust the frequency lock points quickly and accurately. This method can be used in atomic magnetometer, degenerate Raman sideband cooling (DRSC) and two photon excitation of Rydberg states.
We present a method of diode laser frequency stabilization based on the Faraday rotation of linearly polarized light passing through an atomic sample in the presence of a very modest (1mT) magnetic field. Near the zero crossing of this spectroscopic feature, an optical system capable of very precise polarimetry detects and corrects for very small frequency fluctuations via a feedback system, which keeps the rotation signal at zero. In our application, we have demonstrated robust frequency stabilization over time scales from 10ms to 1h at the 1MHz level or below. We utilize this technique to lock our laser to a “forbidden” M1∕E2 transition in thallium at 1283nm, for which saturated absorption techniques are not straightforward. This technique has broad applicability to spectroscopy of various atomic systems as we also demonstrate using a Rb cell and a 780nm diode laser.
In this work we investigate the transmission in an optical cell containing an atomic vapor, when a laser is tuned to the wings of the Doppler line, presenting inhomogeneous broadening. The experiment is designed to detect the transmission of a laser beam through a an atomic cesium vapor within a quartz cell. Due to the high atomic density in the 1 mm cell, the laser beam is totally absorbed at resonance. On the other hand, when the detuning by few GHz from the center of the line an oscillatory signal is observed as a function of the laser frequency. The amplitude of the transmission signal varies linearly with the laser intensity. These oscillations exhibit diferent behavior as we change some parameters of the system, and the rate of the oscillations vary with laser detuning and on the atomic density. The phase of the transmited field is also sensitive to the angle of incidence of the laser beam in the cell, which allows to vary the lineshape of the signal without changing the parameters of the laser (intensity, frequency, ...) or atomic vapor. Out of resonance with the atomic vapor, the parallel windows of commercial optical cell cavity works as a low finesse Fabry-Pérot with a free spectral range of 150 GHz. However, in resonance, the optical path of the cavity changes varies with frequency due to the dispersive response of the atomic vapor. This study experimentally characterized the transmission signal through a cavity containing resonant vapor as a function of intensity and frequency of the laser, as well as its dependence on the angle of incidence of the beam. A numerical model that allows to determine the collisional broadening of the atomic vapor adjusting the spectral curves of the transmission signal was developed. As an application, exploring the oscillations in the wings of the resonance, we can lock the laser frequency at a few GHz off the center of the atomic resonance. The lock was performed in the frequency range between 0,8 GHz and 2,4 GHz from the center of the D2 line of cesium. To characterize the locking stability we measure the optical beat signal between two similar experiments, using the same locking technique.
Abstract In optical systems, acousto-optic modulators (AOMs) and electro-optic modulators (EOMs) are commonly utilized for laser frequency manipulation. However, these devices come with drawbacks such as high cost and the requirement of optical adjustments to change the frequency shift direction. In this study, we propose an alternative method that harnesses the Zeeman effect in the saturated-absorption spectroscopy to shift the energy levels in atom. With this technique, the laser frequency can be shifted without the need for AOMs or EOMs. The stability of laser locking was investigated for any case of polarization of probe and pump beam. We found when the polarization of the probe and pump beams is linear and perpendicular, it results in the highest level of stability in laser locking compared to other polarization configurations.
Laser intensity noise is one of the main limiting factors in pulsed vapor cell clocks. To reduce the contribution of the laser intensity noise to detection signal in the pulsed optically pumped atomic clock, a scheme based on the differential Faraday rotation angle is proposed. Theoretically, the Ramsey fringes, the sensitivity of clock frequency to laser intensity fluctuation and the signal to noise ratio for absorption, differential, and Faraday rotation angle methods are calculated and compared. Using a Wollaston prism rotated 45°relative to the incident polarization, and two photodetectors, Ramsey fringes of three detection methods are obtained simultaneously. In the proposed scheme, the long-term Faraday rotation angle fluctuation is 0.66% at 30000s, which is much smaller than fluctuation of traditional absorption signal 3.9% at 30000s. And the contribution of laser intensity noise to clock instability is also reduced. Using optimized photodetector with high common mode rejection ratio, a better performance should be expected. This proposed scheme is attractive for the development of high performance vapor clock based on pulsed optically pumped.
We herein develop and demonstrate a stable frequency-locking scheme for Rydberg atomic experiments. We use the Zeeman effect to modulate the three-level ladder-type Rydberg electromagnetically induced transparency (EIT) signal to lock the laser frequency of the coupling light for transition from its intermediate state to a Rydberg state. The effects of polarization of the probe and coupling lights, and the amplitude of the AC modulated magnetic field B 0 on the EIT and the corresponding dispersive error signal, are both analyzed. The results show that both the EIT signal and dispersive error signal are the strongest when the polarizations of coupling and probe fields are circular and equal. The signal-to-noise ratio of the dispersive error signal increases with B 0 . The slope of the dispersive error signal increases first and then decreases with B 0 , which is related to the increase of the EIT linewidth caused by the higher B 0 . The linewidth of the laser is significantly less than 500 kHz after frequency locking, which satisfies the requirements of most experiments involving Rydberg atoms. The method proposed herein can generally be applied to any cascade system of Rydberg atoms.