Reversible logic is becoming increasingly important with the rise of technologies like quantum computing, as it retains information during computation and maintains a direct match between each input and its corresponding output. Quantum circuits are inherently reversible and the best computational model in quantum computing systems. Quantum computers require quantum processors. A critical component of any computer's processor is the arithmetic component, that handles binary operations like addition, subtraction, multiplication, and division. Notably, multiplication can be accomplished by repeatedly adding, while division can be carried out by repeatedly subtracting. This paper proposes a new design of quantum-controlled adder/subtractor (QCAS) with efficient quantum criteria like delay, quantum cost, number of ancilla and of garbage outputs. We propose a quantum reversible controlled full adder/subtractor block which is applied to construct an n-bit quantum adder/subtractor circuit. The proposed circuit is simulated using the Quirk online tool and the result confirms the accuracy of the design. This design achieves 28.5% and 61.3% improvement in delay and garbage outputs, and 14% and 41.2% increase in quantum cost and constant input, compared to its counterpart, respectively.
Reversible logic is becoming increasingly important with the rise of technologies like quantum computing, as it retains information during computation and maintains a direct match between each input and its corresponding output. Quantum circuits are inherently reversible and the best computational model in quantum computing systems. Quantum computers require quantum processors. A critical component of any computer's processor is the arithmetic component, that handles binary operations like addition, subtraction, multiplication, and division. Notably, multiplication can be accomplished by repeatedly adding, while division can be carried out by repeatedly subtracting. This paper proposes a new design of quantum-controlled adder/subtractor (QCAS) with efficient quantum criteria like delay, quantum cost, number of ancilla and of garbage outputs. We propose a quantum reversible controlled full adder/subtractor block which is applied to construct an n-bit quantum adder/subtractor circuit. The proposed circuit is simulated using the Quirk online tool and the result confirms the accuracy of the design. This design achieves 28.5% and 61.3% improvement in delay and garbage outputs, and 14% and 41.2% increase in quantum cost and constant input, compared to its counterpart, respectively.
Reversible logic is becoming increasingly important with the rise of technologies like quantum computing, as it retains information during computation and maintains a one-to-one mapping between input and output patterns. Quantum circuits are inherently reversible and the best computational model in quantum computing systems. Some quantum signal processing applications like filters and image processing applications require the results of arithmetic operations to be saturated. Saturation occurs when adding two numbers with the same sign and this can be done through a quantum saturating adder. This paper proposed a reversible quantum saturating adder with efficient quantum criteria like quantum cost, number of ancilla, and number of garbage outputs. We firstly propose a reversible n-bit quantum saturation generator block which is applied to a quantum adder and construct a quantum saturating adder circuit. The proposed circuit is simulated using the Quirk online tool and the result confirms the accuracy of the design. This design achieves 18% and 33% improvement in quantum cost and garbage outputs, compared to its counterpart, respectively.
Quantum processors are a central element of a quantum computer. Processors are responsible for performing the fundamental operations like addition, subtraction, etc. of any computer. This also involves the arithmetic unit and has a different configuration for the quantum computer than for a classical computer. Multiplication is essentially repeated addition and division is repeated subtraction. But for quantum computer other methodologies have to be used for arithmetic. In this paper a Quantum Full Adder/Subtractor Circuit, using the reversible Peres Gate, R3Gate and a NOT Gate, is proposed. So, the proposed design can be used for both modes, adder and subtractor on quantum operation. The authors have also compared proposed design with other designs reported, in terms of Gate count, Garbage bits, Quantum cost and Delay. The authors have achieved a 62.5% increment in delay and a low power computing reversible logic in which the computation is faster and energy efficient. Using IBM Qiskit, the authors have created and tested the circuit.
Arithmetic units are the computational cores of any processor, and among them, the full adder-subtractor circuit can be regarded as the most fundamental, as it can support the entire spectrum of computation, ranging from integer arithmetic to filtering and cryptographic functions. In the context of quantum computing, these units must be implemented using reversible logic gates that preserve the information processed, as any loss of information violates the principles of the unitary dynamics of quantum mechanics and the thermodynamic principle of bit erasure. In the context of the full adder-subtractor circuit, the previous implementations had three main drawbacks, namely, the use of multiple ancilla input qubits, the generation of garbage qubits, and the use of non-native gates. In this paper, a novel implementation of the reversible full adder-subtractor circuit using the IBM Quantum Composer tool, with the support of only the native gates of the IBM Quantum device, namely, the Hadamard, the Controlled-NOT, and the Toffoli gates, is proposed. The proposed circuit works with six qubits and thirteen gates, with a quantum cost of 13, zero ancilla inputs, and zero garbage outputs simultaneously. The circuit uses only one mode select qubit (M) for operation. When M is 0, the circuit works for full addition with Sum and Carry-out. When M is 1, the circuit works for full subtraction with Difference and Borrow-out through a two's complement B-inversion method. The circuit is simulated using the IBM Quantum composer Simulator with 1024 shots. The Hadamard-based superposition method is used to test all eight input combinations simultaneously in a single run.
The power consumption in classical computers has grown to be a critical issue. Thus, quantum computers have become a promising alternative to classical computers for more processing power and lower energy consumption. Reversible gates are important for building the quantum computers. Reversible circuits have various applications, such as digital signal processing, optical computing, quantum computing, etc. The design and synthesis of reversible gates and circuits have grown in popularity and attracted the attention of many researchers. The adder and subtractor are important computation blocks for the structure of the Arithmetic Logic Unit (ALU). In this paper, a design of reversible binary half and full adders and subtractors using reversible logic gates is proposed. The TR (Thapliyal Ranganathan) and Peres gates are used to construct the reversible half adder and subtractor circuit. Meanwhile, the Double Peres Gate (DPG), Fredkin, and NOT gates are used to build the reversible 1-bit full adder and subtractor circuit. The designs are optimized in terms of number of gates, constant inputs, garbage outputs, and quantum cost. The truth table representation and the Binary Decision Diagram (BDD) synthesis method are used to represent and synthesize the circuits, respectively. The circuits are synthesized and simulated using the Verilog Hardware Description Language code and Xilinx ISE 14.7. The results show that the proposed designs achieve the lowest quantum cost in both half adder/subtractor and full adder/subtractor. As the half adder/subtractor has six quantum cost and the full adder/subtractor has nine quantum cost.
Reversible logic is gaining significance in the context of emerging technologies such as quantum computing since reversible circuits do not lose information during computation and there is one-to-one mapping between the inputs and outputs. In this work, we present a class of new designs for reversible binary and BCD adder circuits. The proposed designs are primarily optimized for the number of ancilla inputs and the number of garbage outputs and are designed for possible best values for the quantum cost and delay. In reversible circuits, in addition to the primary inputs, some constant input bits are used to realize different logic functions which are referred to as ancilla inputs and are overheads that need to be reduced. Further, the garbage outputs which do not contribute to any useful computations but are needed to maintain reversibility are also overheads that need to be reduced in reversible designs. First, we propose two new designs for the reversible ripple carry adder: (i) one with no input carry c 0 and no ancilla input bits, and (ii) one with input carry c 0 and no ancilla input bits. The proposed reversible ripple carry adder designs with no ancilla input bits have less quantum cost and logic depth (delay) compared to their existing counterparts in the literature. In these designs, the quantum cost and delay are reduced by deriving designs based on the reversible Peres gate and the TR gate. Next, four new designs for the reversible BCD adder are presented based on the following two approaches: (i) the addition is performed in binary mode and correction is applied to convert to BCD when required through detection and correction, and (ii) the addition is performed in binary mode and the result is always converted using a binary to BCD converter. The proposed reversible binary and BCD adders can be applied in a wide variety of digital signal processing applications and constitute important design components of reversible computing.
This paper proposed the design and development of reversible cost-efficient innovative quantum dual-full adder and subtractor or QD-FAS circuit using quantum gate. The proposed circuit can be used as full adder and full subtractor simultaneously, which is designed using double Peres gate or DPG and Feynman gate or FG. The quantum cost, garbage output and constant input of the QD-FAS is 8, 1 and 1. Which is better w.r.t previously reported work. The QD-FAS circuit, as proposed, includes shared sum and difference terminals, as well as a carry-out and a borrow output terminal. Notably, this innovation showcases a remarkable 27.27% reduction in quantum cost. The improvement in garbage output is even more striking, showing a 50% enhancement. When assessing the overall advancement in quantum cost, it falls within the range of 27.27% to 66.66%. To confirm the viability of this design, extensive testing is carried out using the IBM Qiskit simulator. This design holds significant importance in a variety of applications, including quantum computing, cryptography, and the realm of reversible Arithmetic Logic Units (ALU).